fantastic furniture Bermuda User manual

Bermuda
Table D6 Acacia
fantasticfurniture.com.au
Version 1.0

Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Care Tips for Timber Products
Following the general care instructions below will help extend the life of
your product and keep them looking their best!
Timbers are a natural product and can require a little bit more maintenance
to help keep them looking fresh and new. Exposure to the elements will
cause all timbers to dry out over time, which may lead to some minor split-
ting on the surface. This is completely normal and not a product fault.
To keep the product looking new applying some pure Tung or Linseed oil
over all exposed timber parts will help rejuvenate the timber and minimise
any splitting or cracking. We recommend you do this at least once a year
before summer starts. Remember to test the oil first in a non-conspicuous
area, as it may impact the colour of the finish.
To increase the lifespan of your product we discourage prolonged or exces-
sive exposure to sunlight and other inclement weather, as well as substanc-
es like suntan oils and heavily chlorinated water as this may cause products
to fade, dry out or speed up the eects of wear and tear.
fantasticfurniture.com.au Page 2

fantasticfurniture.com.au Page 3
Assembly checklist
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Useful information
! Never use power tools unless specifically instructed. They can damage your components or hardware if used
incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting components back
to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to avoid scratching or
damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be used in as they may
not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for product care
instructions.
! If you are having any diffculties assembling your product, missing any hardware or components please visit our
website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
.\fhlqc23 assembly instructions\fhlqc 23.3001 assembly instruction artwork v1\ff-logo_vertical_black.jpg

fantasticfurniture.com.au Page 4
8 x Long Bolts
(H1)
8 x Washers
(H2)
What you need
to assemble the product
Parts list
Table Top (P1)
4 x Legs (P2)
Hardware pack
4 x Legs (P2)
Table Top (P1)
8 x Spring Washers
(H3)
.\fhlqc23 assembly instructions\fhlqc 23.3001 assembly instruction artwork v1\ff-logo_vertical_black.jpg
2x Allen Key
(H4)

Step 2
Page 5
Job Complete!
Step 1
You will need
8 x Long Bolts (H1)
8 x Washers (H2)
8 x Spring Washers (H3)
(P2)
fantasticfurniture.com.au
Carefully lay down the table top (P1) as shown. We strongly recommend assembling this table on asoft surface to
avoid damaging the table top.
Secure 1 x leg (P2) to the table top (P1) using 2 x washers (H2), 2 x spring washers (H3) and 2 x long bolts (H1),
tightening by turning clockwise using allen key (H4).
Repeat this step for the other 3 x legs (P2). Ensure all bolts are fully tightened.
With assistance, carefully turn the table upright.
(P2)
(P2)
(P2)
(P1)
(H2)
(H3)
(H1)
(H4)
Allen Key (H4)
In the interest of our environment please dispose
of all packaging thoughtfully