fantastic furniture Hamilton Side Table Square User manual

Version 1.0
Hamilton
Side Table Square
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Recommended weight capacity : 30kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
2 x Side Panel (P2);
Shelf Panel (P3);
4 x Rail (P4);
Hardware pack
Top Panel
(P1)
Shelf Panel
(P3)
Side Panel
(P2)
Side Panel
(P2)
Rail
(P4)
Rail
(P4)
Rail
(P4)
Rail
(P4)
12 x Cam Nuts
(H4)
8 x Screws
(H2)
4 x Dowels
(H1)
12 x Cam Bolts
(H3)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
fantasticfurniture.com.au
DO NOT USE

You will need
Step 1
Step 2
You will need
Phillips Head
Screwdriver
Attach 8 x Cam Bolts (H3) to Side Panels (P2x2) by tightening with the Phillips Head Screwdriver.
Attach Rails (P4x2) to Shelf Panel (P3) with 4 x Screws (H2) by tightening the Phillips
Head Screwdriver.
fantasticfurniture.com.au Page 5
(P2)
X2
H3
H3
H3
H3
8 x Cam Bolts
(H3)
(P4)
(P3)
(P4)
Phillips Head
Screwdriver
4 x Screws
(H2)
H2
H2
H2
H2

You will need
Step 3
Step 4
You will need
Insert 2 x Dowels (H1) into Side Panel (P2). Insert 4 x
Cam Nuts (H4) into Shelf Panel & Rails (P3&P4x4). Rotate the nuts so the arrows point towards
the incoming bolts. Attach Shelf Panel & Rails (P3&P4x4) to Side Panel (P2) by tightening all nuts
with the Phillips Head Screwdriver.
Insert 2 x Dowels (H1) into Shelf
Panel (P3). Insert 4 x Cam Nuts
(H4) into Shelf Panel & Rails
(P3&P4x4). Rotate the nuts so
the arrows point towards the
incoming bolts. Attach Side Panel
(P2) to Shelf Panel & Rails (P3&P4x4)
by tightening all nuts with the Phillips
Head Screwdriver.
Phillips Head
Screwdriver
(P2)
(P4)
(P4)
(P4)
(P4)
(P3)
H4
H4
H4
H1
H1
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P4)
(P4)
(P4)
(P2)
(P4) (P3)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
4 x Cam Nuts
(H4)
2 x Dowels
(H1)
H4
H4
H4
H4
H1
H1
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
2 x Dowels
(H1)

You will need
Step 5
Step 6
You will need
Attach 4 x Cam Bolts (H3) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
Insert 4 x Cam Nuts (H4) into Side Panels (P2x2) as
shown. Rotate the nuts so the arrows point towards
the incoming bolts. Attach Rails (P4x2) and Side Panels (P2x2) to Top Panel (P1)
with 4 x Long Screws (H2) by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
fantasticfurniture.com.au
fantasticfurniture.com.au Page 7
(P4)
(P4)
(P1)
(P1)
(P2)
(P2)
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
H3
H4
H4
H4
H2
H2
H2
H3
H3
H3
4 x Cam Nuts
(H4)
4 x Long
Screws (H2)

fantasticfurniture.com.au
fantasticfurniture.com.au Page 8
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.