fantastic furniture Reed User manual

fantasticfurniture.com.au
0.1noisreV
Pantry 1 Door
Reed

Secure it!
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
Reduce the risk of furniture
tip-over accidents
Page 2
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
15
WEIGHT LIMIT: KGS PER SHELF
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
•Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
•Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
•Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
•Avoid putting a TV on this product.

Page 3
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Page 4
fantasticfurniture.com.au
Read through the instructions
carefully before you begin.
Identify and lay out all of the
components before you begin assembly. Unless instructed, do not fully tighten
screwsuntil the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a so t surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
components please visit our website Help Centre for further assistance.
Assembly Checklist
!Please see page 2 for any safety requirements or weight restrictions.
Useful information

Page 5
fantasticfurniture.com.au
16X Screws
C
What You Need
to assemble the product
Other tools you need
Phillips head screwdriver; Hammer.
Parts list
Box :
Door Panel (P9)
Side Panel(L)
(P1)
Side Panel(R)
(P2)
Door Panel
(P9)
Top Panel
Fixed Panel
Bottom Panel
Adjustable Panel
Adjustable Panel
Base Panel
Back Panel
(P3)
(P4)
(P5)
(P6)
(P5)
(P6)
(P7)
(P8)
Ø35 mm(45°)
Ø8 x M4 x 18 mm
(H2) (H3) (H4) (H5) (H7)
(H12)
(H11)
(H10)
(H9)(H8)
16X Plastic Cap 20X Plastic Dowel 3X Hinges 12X Screw 8X Shelf Support 1X Metal Handle
2X Screw 36X Nail 6X Screw 1X Wall Strap 1X Screw 5X Leg Stud
(H6)
(H13)
Fixed Panel
(H1)
2X Washer
(H14)
Back Panel(P8)
Hardware Pack :
Base Panel (P7)
2 x Adjustable Panel(P6)
Top Panel (P3)
Bottom Panel (P4)
2 x Fixed Panel (P5)
Side Panel (R) (P2)
Side Panel (L) (P1)

Page 6
fantasticfurniture.com.au
Step 1
5 x2
You will need
Phillipshead
screwdriver
(H4)
3X Hinges (H5)
6X Screw
(H7)
1X Metal Handle (H8)
2X Screw
x2
You will need
(H3)
20X Plastic Dowel
(P3)
(P4)
(P7)
(P5)
(H3) (H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H8)
(H7)
(H5)
(H3)
(P9)
Fix Hinges (H4) to Door Panel (P9) by tightening with Screws (H5) ,
Line Handle (H7) to pre drilled holes and tighten with Screws(H8).
Fix Plastic Dowels (H3) to Panels (P3,P4,P5×2 and P7) one by one.
Step 2
(H4)

fantasticfurniture.com.au
Page 7
outwards
Step 3 Ensure the pre-drilled hole
Step 4
C
You will need
Phillipshead
screwdriver
16X Screw
(H1) (P3)
(P5)
(P5)
(P4)
(P2)
(P1)
(P7)
(H1)
5
5
You will need
Phillipshead
screwdriver
(H10)
(H9)
36X Nail 6X Screw
(P8)
(H10)
(H9)
Screw(H10)
Pre-drilled guide
Fix Back Panel (P8) to assembled unit using Nails(H9).
holes for
Hammer
Fix Top and Bottom Panels (P3+P4), Base Panel (P7), and Fixed Shelves (P5x2) to Side
Panel (P1) by tightening with Screws (H1).
Repeat for Side Panel (P2).
Fix Back Panel (P8) to Fixed Shelves (P5x2) using Screws (H10).
*Ensure the predrilled screw holes line up with the Fixed Shelf Panels (P5x2) before
fixing Back Panel.
WARNING:ENSURE THE WALL STRAPIS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury, this product has been
fittedwith a wall strap to prevent toppling. We strongly
recommendthat this product is permanently fixed to the
wallor other suitable surface. Fixing devices are not
includedsince different surface materials require
differentattachments. Please seek professional advice
ifyou are in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71Seville Street
FAIRFIELDEASTNSW 2165
AUSTRALIA
PO#:ABC123
on top panel is facing
upwards on the outside
of the unit
Ensure the raw edges of the
shelves are facing towards
the back of the unit
Ensure the raw edge
of back panel is facing
WARNING:ENSURE THE WALL STRAPIS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury, this product has been
fittedwith a wall strap to prevent toppling. We strongly
recommendthat this product is permanently fixed to the
wallor other suitable surface. Fixing devices are not
includedsince different surface materials require
differentattachments. Please seek professional advice
ifyou are in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71Seville Street
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123

Page 8
fantasticfurniture.com.au
Step 5
Step 6
You will need
(H13)
(H13)
Fix Leg Studs (H13) to the bottom of Panels (P1,P2 and P7).
5X Leg Stud
(H13)
11
You will need
Ø35 mm(45°)
8X Shelf Support
(H6)
(P6)
(P6)
(H6)
Place Shelf Supports (H6) into Side Panels (P1,P2) at preferred height.
Place Adjustable Panels (P6x2) into secured shelf supports .
Hammer
(P2)
(P7)
(P1)
W
ARNING:ENSURE THE WALL STRAP IS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury, this product has been
fittedwith a wall strap to prevent toppling. We strongly
recommendthat this product is permanently fixed to the
wallor other suitable surface. Fixing devices are not
includedsince different surface materials require
differentattachments. Please seek professional advice
ifyou are in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71Seville Street
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123

x 10
Page 9
fantasticfurniture.com.au
mounting screw
Lateral adjustment
Step 7
Step 8
(P9)
(P2)
Fix Door Panel (P9) to Side Panels
(P2) using Screws (H5).
You will need
Phillipshead
screwdriver
(H5)
6X Screw
(H5)
(H5)
Adjusting possibilities
by screw adjustment slackening the
Front-to-back by
hinge-arm
Vertical adjustment via
mounting plate(via slots or,
if in two pieces ,by screws)

fantasticfurniture.com.au
1X Wall Strap
Step 10
You will need
Step 9
You will need
(H2)
16X Plastic Cap
(H2)
Use Plastic Caps (H2) to cover all screws.
(H12)
(H11) 1X Screw
1X Washer
(H14) Phillipshead
screwdriver
(H12)
(H14)
(H11)
Use the Screw (H12) and Washer (H14)
to connect the Wall Strap (H11) to the Top
Panel(P3);
Back View
(P3)
WARNING:ENSURETHE WALL STRAP IS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury,this product has been
fittedwitha wall strap to prevent toppling. We strongly
recommendthatthis product is permanently fixed to the
wallorother suitable surface. Fixingdevices are not
includedsincedifferent surface materials require
differentattachments. Please seek professional advice
ifyouare in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71SevilleStreet
FAIRFIELDEAST NSW2165
AUSTRALIA
PO#:ABC123
Page 10