fantastic furniture Toronto Hall Table 2 Drawer User manual

Version1.0
Coffee Table 2DrawerWhite Walnut
Trkay
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2Page 2
Looks like you’ve found
your Fantastic!
Loveit? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au

Assembly checklist
Useful Infrmatin
Read throughtheinstructionscarefully
beforeyoubegin. Makesure youhavealltherequiredtools. Neveruse power tools unlessinstructed.
Identify andlayoutall of thecomponents
beforeyoubeginassembly. Unless instructed, donotfullytighten screws untilthe itemisfully assembled.
Never use power tools unless specifically instructed.They can damageyourcomponents
or hardware if usedincorrectly.
The most common mistakes madeduring assembly are using the wrong hardware or
getting components back to front.
Always useasoft surface(suchas carpet or cardboard) when assembling yourproduct
to avoidscratching or damaging the surfaceof the product.
Bulky itemssuchas wardrobes andbunk bedshouldbeassembled in the roomthey will
beusedin as they may not fit throughadoor onceassembled.
Never use any glue until you are certain that the parts belong together.
Periodically check andre-tighten all fasteners.Check the productcare label or website
for product care instructions.
Ifyou are having any difficulties assembling your product,missing any hardware or
components please visit our website HelpCentre for further assistance.
Page3
fantasticfurniture.com.au
!
!
!
!
!
!
!
Please see page2for any safety requirements orweight restrictions.
!

Whaty u Need
Toassembletheproduct
fantasticfurniture.com.au
Othertls yu need:
Phillips headscrewdriver
Mallet(softheaded)
Part list
1 xTopPanel (P1);
1 xLeftSide(P2);
1 xRight Side(P3);
1 xTopPanel Rail (P4);
1 xFront Support Rail (P5);
1 xBackSupport Rail (P6);
1 xCentrePanel (P7)
1 xBottom Shelf (P8);
1 xMiddleFoot(P9);
2xFakeDrawerFronts(P10);
2xDrawerFronts(P11);
2xLeftDrawerSides (P12);
2xRight DrawerSides (P13);
2xDrawerBacks(P14);
2xDrawerBases (P15);
2xDrawerSupport Rails(P16).
Page4
Hardware pack
X2
Fake Drawer
Front(P10)
Centre Panel
(P7)
LeftSide
(P2)
Fake Drawer
Front(P10)
RightSide
(P3)
TopPanelRail (P4)
TopPanel
(P1)
BackSupportRail
(P6)
FrontSupportRail
(P5)
BottomShelf (P8)
MiddleFoot(P9)
LeftDrawerSide
(P12)
RightDrawerSide
(P13)
DrawerFront(P11)
DrawerBack
(P14)
DrawerSupportRail
(P16)
DrawerBase
(P15)

Youwillneed:
Attach13x largecambolts (H1) intotoppanel(P1)using aphillipshead
screwdriver.
Insert9xwoodendowels(H3)intotoppanelrail(P4),frontsupportrail (P5), back support rail
(P6)andbottomshelf(P8) as shown.
Attach 4xlargecam bolts(H1)toback support rail(P6)using aphillipsheadscrewdriver.
Phillips Head
Step2
Step1
Page5
Screwdriver
fantasticfurniture.com.au
(P1)
(H1)x13
Youwillneed:
4 xLarge
CamBolts
(H1)
9xWooden
Dowels
(H3)
Phillips Head
Screwdriver
Mallet
(soft
headed)
13xLarge Cam
Bolts(H1)

Youwillneed:
6 xLarge
CamBolts
(H1)
2x Wooden
Dowels
(H3)
Attach6xlargecambolts(H1)toleftside(P2)using aphillipsheadscrewdriver.
Insert 2xwoodendowels intoleftside(P2).
Attach1xleftrunnertrack(H11)using 3x smallscrews(H7),tightening with aphillips
headscrewdriver.
Ensure thescrewsare insertedthroughthe holes shown in theimageabove.
1 xLeft
RunnerTrack
(H11)
3xSmall
Screws(H7)
Youwillneed:
6 xLarge
CamBolts
(H1)
1xRight
RunnerTrack
(H12)
2x Wooden
Dowels
(H3)
Attach6xlargecambolts(H1)torightside(P3) usingaphillips
headscrewdriver.
Insert 2xwoodendowels intorightside(P3).
Attach1xrightrunnertrack (H12) using3x small screws(H7),tightening
withaphillipsheadscrewdriver.
Ensure thescrewsare insertedthroughthe holes shown in the image
above.
Phillips Head
Screwdriver
Phillips Head
Screwdriver
3xSmall
Screws(H7)
Step4
Step3
Page6
fantasticfurniture.com.au
(H1)x6
Mallet
(soft
headed)
Mallet
(soft
headed) (H3)
(H3)
(H12)
(H7)x3
(H7)x3
(P2)
(H3)
(H3)
(H7)
(H11)
(H7)

Attachfront supportrail(P5) and back supportrail(P6)to thecentrepanel (P7)
using 2xlargescrews(H4),tightening withaphillipsheadscrewdriver.
Step6
Step5
Page7
Phillips Head
Screwdriver
fantasticfurniture.com.au
Youwillneed:
Insert 4x wooden dowels(H3)intocentre panel (P7).
Attach1xrightrunnertrack (H12) tocentre panel (P7)
using 3xsmallscrews(H7),tightening with aphillipshead
screwdriver.Ensurethescrews areinserted throughthe
holesshowninthe imageabove.
Turnover thecentrepanel(P7).Attach1xleftrunner track
(H11) tothe centrepanel(P7),using 3x smallscrews (H7),
tighteningwithaphillipshead screwdriver.Ensure the
screws areinserted throughtheholesshowninthe image
above.
Youwillneed:
4xWooden
Dowels
(H3)
1 xLeft
RunnerTrack
(H11)
6 xSmall
Screws(H7)
Phillips Head
Screwdriver
Mallet
(soft
headed)
1xRight
RunnerTrack
(H12)
2xLarge
Screws(H4)
(H4)
(H4)
(H7)x3
(H7)x3
(H11)
(P7)
(P7) (H3)
(H3)
(H12)
secondhole
firsthole
(H3)
(H3)

Step8
Step7
Page8
fantasticfurniture.com.au
4 xLarge
CamNuts(H2)
Youwillneed:
Phillips Head
Screwdriver
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
2xLarge
CamNuts(H2)
Youwillneed:
Phillips Head
Screwdriver
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Attach2xfakedrawerfronts(P10) tothe back supportrail (P6).Insert4x largecamnuts
(H2)into the2x fakedrawerfronts (P10)and rotatesothe arrowsonthe camnuts facethe
incomingcambolts.Using aphillipsheadscrewdriverturnthelargecamnuts(H2)clockwise
tolock.
(P10)
(P10)
(P6)
(H2)x4
(P2)
(H2)
(H2)
(P5)
(P6)
Withassistance,attachthe front supportrail(P5) and back supportrail(P6) to left
side(P2).Insert2x largecamnuts (H2) intotherails(P5,P6) androtate so the
arrows on thecamnutsfacetheincoming bolts.Usingaphillipshead
screwdriver,turnthe largecamnuts (H2) clockwise to lock.

Step10
Step9
Page9
fantasticfurniture.com.au
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
1 xLarge
CamNut(H2)
Youwillneed:
Phillips Head
Screwdriver
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Attachtop rail panel (P4) toleftside.Insert1x largecamnut(H2) into top
panelrail(P4)and rotatesothe arrow on thecamnutfaces the incomingcam
bolt.Usingaphillipsheadscrewdriver,turn thelargecamnut(H2) clockwise to
lock.
(P2)
(P8)
(H2)x3
3xLarge
CamNuts(H2)
Youwillneed:
Phillips Head
Screwdriver
Withassistance,attachthe bottomshelf(P8)to leftside(P2).Insert3x large
camnutsintothebottomshelf (P8) androtatethecamnuts so the arrows
pointtowardstheincomingcambolts.Using aphillipsheadscrewdriver,turn
the largecamnuts(H2) clockwiseto lock.
largehole
facebottom

Step12
Step11
Page 10
fantasticfurniture.com.au
6 xLarge
CamNuts(H2)
Youwillneed:
Phillips Head
Screwdriver
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Withassistance,attachrightside(P3)to theassembledframe.Insert6x large
camnuts(H2)into rails (P4,P5,P6)andbottomshelf (P8) androtatethecamnuts
sothe arrowspointtowardstheincoming cambolts.Usingaphillipshead
screwdriver,turnthe largecamnuts (H2) clockwise to lock.
(H2)x6
(P2)
(P3)
Attachmiddlefoot (P9) tobottomshelf (P8) by turning clockwisetofully lock.
(P8) (P9)

Attach2xhandles (H6) to2x fakedrawer fronts(P10)with 4x handle
screws (H5).
Youwillneed:
4 x Handle
Screws(H5) 2xHandles
(H6) Phillips Head
Screwdriver
Page 11
fantasticfurniture.com.au
Step13
Step14
13xLarge
CamNuts(H2)
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Youwillneed:
4 xLarge
Screw(H4) Phillips Head
Screwdriver
Attachtop panel(P1)to theassembleunitas shown.
Insert 13x largecamnuts(H2)into sidepanels (P2,P3)and fakedrawerfronts(P9),
ensuringthearrowspointtowardsincomingcambolts.Usingaphillipshead
screwdriver,turnthe largecamnuts (H2) clockwise to lock.
Attachthetoppanelrail(P4)to top panel(P1)using4xlargescrews (H4).
(P10)
(P10)
(H6)
(H6)
(P1)
(P2)
(P3)
(H4)
(H2)
(P4)

Step16
Step15
Page 12
fantasticfurniture.com.au
Attach5 xsmallcambolts(H9)to1x drawer front (P11)usingaphillipshead
screwdriver.
Repeat thisprocessforthe other drawerfront(P11).
Youwillneed:
10xSmall
Cambolts(H9) Phillips Head
Screwdriver
Attach1xleftdrawerside(P12)and 1x rightdrawer side(P13) to1x drawer front
(P11),ensuringthegrooves on allpanelsalign.Insert4x smallcamnuts(H10)
intothedrawer sides (P12,P13),ensuringthearrowonthesmallcamnuts(H10)
facesthe incomingcambolts.Usingaphillipsheadscrewdriver,turn thesmall
camnuts(H10) clockwise to lock.Repeatthis processfor theother drawer.
Youwillneed:
Phillips Head
Screwdriver
8xSmall
CamNuts(H10)
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt. X2
X2
(P11)
(P11)
(P12)
(P13)
(H9)x5
(H10)x4

X2
Sep17
Page 13
fantasticfurniture.com.au
Sep18
Insert 1xdrawerbase(P15)into thegrooves on thedrawersides(P12,P13)
anddrawerfront(P10).Repeat thisprocessforthe other drawer.
X2
(P16)
(P11)
Youwillneed:
Phillips Head
Screwdriver
2xSmall
CamNuts(H10)
This is how acamnu works........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
(H10)
Attachdrawersupport rail(P16) tothe drawerfront(P11),Insert 1x small cam
nut(H10)intothe drawersupport rail(P16),ensuringthearrowonthe small
camnuts(H10) facesthe incomingcambolts.Usingaphillipshead
screwdriver,turnthe small camnut(H10) clockwise to lock.Repeat this
processforthe other drawer.
(P12)
(P13)
(P15)
paperlaminationtoface
insideof drawer

Use 6xmediumscrews (H8) toattach1xdrawerbackpanel (P14) to the
drawersides(P12,P13)and drawersupportrail(P15).Repeat this process for
the other drawer.
You will need:
Phillips Head
Screwdriver
12xMedium
Screws(H8)
Attach1xhandle(H6)todrawerfront(P10) using2x
handlescrews(H5),tighteningwithaphillipshead
screwdriver.Repeatthis processfor theotherdrawer.
Youwillneed:
4 x Handle
Screws(H5) 2xHandles
(H6) Phillips Head
Screwdriver
Step20
Step19
Page 14
fantasticfurniture.com.au
X2
(P14)
(P12)
(P13)
(H8)x6
(H5)x2
(H6)
X2

(H7)x3
Attach1xleftrunner (H13)to leftdrawer side(P12) and1xright runner
(H14) torightdrawer side(P13) using6x small screws(H7),tighteningwith
aphillipsheadscrewdriver.Repeatthisprocess fortheotherdrawer.
X2
12xSmall
Screws(H7) 2xLeft
Runners(H13)
2xRight
Runners(H14)Phillips Head
Screwdriver
Youwillneed:
Slidethe 2xassembleddrawersinto thecoffee
tableasshown.
Step21
Page 15
fantasticfurniture.com.au
(H13)
(H14)
(P12)
(H7)x3
(H13)
(P12)
Step22

Page 16
fantasticfurniture.com.au
Step23