fantastic furniture Hamilton Bedside 2 Drawer User manual

Version 1.0
Hamilton
Bedside 2 Drawer
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love！
Recommended weight capacity : 50kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Bottom Front Rail (P4);
Bottom Back Rail (P5);
Back Panel (P6);
2 x Drawer Fronts (P7);
2 x Left Drawer Sides (P8);
2 x Right Drawer Sides (P9);
2 x Drawer Bases (P10);
2 x Drawer Backs (P11);
Top Front Rail (P12)
Hardware pack
Left Drawer
Side (P8)
Right Drawer
Side (P9)
Drawer Back
(P11)
Drawer
Base (P10)
Drawer
Front (P7)
Top Panel
(P1) Right Side
Panel
(P3)
Left Side
Panel (P2)
Back Panel
(P6)
Bottom Back
Rail (P5)
Bottom Front
Rail (P4)
Top Front
Rail (P12)
20 x Cam
Bolts
(H3)
20 x Cam
Nuts
(H4)
8 x Dowels
(H1)
20 x Small
Screws
(H5)
2 x CL Runner
Tracks
(H6)
2 x CR Runner
Tracks
(H7)
2 x DR Runners
(H9)
2 x Handle Bolt
(H11)
2 x Handle
(H10)
2 x DL Runners
(H8)
8 x Medium
Screws
(H2)
2 x Long
Screws
(H14)
4 x Wedges
(H12)
4 x Wedge
Screws
(H13)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
fantasticfurniture.com.au
DO NOT USE
x 2

12 x Small
Screws (H5)
(P2)
(P2)
(P3)
(P3)
You will need
Step 1
H7
CR
H5
Step 2
You will need
Phillips Head
Screwdriver
Phillips Head
Screwdriver
8 x Cam Bolts
(H3)
Attach 2 x CL RunnerTracks (H6) and 2 x CR Runner Tracks (H7) to Left&Right Side
Panels (P2&P3) with 12 x Small Screws (H5) by tightening with the Phillips Head Screwdriver.
Attach 8 x Cam Bolts (H3) to Left&Right Side Panels (P2&P3) by tightening with the
Phillips Head Screwdriver.
fantasticfurniture.com.au Page 5
2 x CL Runner
Tracks (H6)
H6
CL
H5
H5
H5
H3
H3
H3
H3
H3
H3
H5
H5
H6
H6
H7
H7
2 x CR Runner
Tracks (H7)
H3
H3

You will need
Step 3
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Step 4
You will need
Insert 4x Dowels (H1) into Left Side Panel (P2). Insert 4 x Cam Nuts (H4) into Rails (P4&P5&P12)
as shown. Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach
Rails (P4&P5&P12) to Left Side Panel (P2) by tightening all cam nuts with the Phillips Head
Screwdriver.
Insert 4 x Dowels (H1) and 4 x Cam
Nuts (H4) into Rails (P4&P5&P12) as
shown. Rotate the cam nuts so the arrows
point towards the incoming cam bolts. Attach
Right Side Panel (P3) to Rails (P4&P5&P12) by tightening all cam nuts with the
Phillips Head Screwdriver.
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
Phillips Head
Screwdriver
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
Phillips Head
Screwdriver
(P2)
(P3)
(P12)
(P12)
(P4)
(P4)
(P5)
(P5)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
H1
H1
H1
H1
H4
H4
H4
H4
H4
H4

Slide Back Panel (P6) into the grooves of Left&Right Side Panels (P2&P3).
Attach 4 x Cam Bolts (H3) to Top Panel (P1) by tightening with the Phillips Head
Screwdriver. Insert 4 x Cam Nuts (H4) into Left & Right Side Panel (P2&P3) as
shown. Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Front Rail (P12) to Top Panel (P1) with 2x Long Screws (H4). Attach Top
Panel (P1) to Left & Right Side Panel (P2&P3) by tightening all cam nuts with the
Phillips Head Screwdriver.
Step 5
You will need
Phillips Head
Screwdriver
Step 6
4 x Cam Nuts
(H4)
4 x Cam Bolts
(H3)
(P2)
(P2)
(P12)
(P1)
(P1)
(P3)
(P3)
(P6)
fantasticfurniture.com.au Page 7
H4
H14
H3
H3
H3
H3
2 x Long
Screws (H14)

You will need
Step 7
Secure Back Panel (P6) in place with 4 x Wedges (H12) using
4 x Wedge Screws (H13). Tighten with a Phillips Head Screwdriver.
Attach 8 x Cam Bolts (H3) to Drawer Fronts (P7x2). Tighten with a Phillips Head Screwdriver.
You will need
Step 8
Phillips Head
Screwdriver
4 x Wedges
(H12)
4 x Wedge
Screws (H13)
Phillips Head
Screwdriver
8 x Cam Bolts
(H3)
(P6)
(P7)
fantasticfurniture.com.au Page 8
H12
H12
H13
H13
x2
H3
H3
H3
H3

You will need
Step 9
Slide the Drawer Base (P10x2) into the grooves
between drawer sides as shown.
Attach Drawer Backs (P11x2) to Drawer
Sides (P8x2&P9x2) with 8 x Medium
Screws (H2), make sure that the groove lines
up the whole way around the drawer. Tighten
with a Phillips Head Screwdriver.
8 x Cam Nuts
(H4)
x2
Attach Drawer Sides (P8x2&P9x2) to Drawer Front (P7x2). Insert 8 x Cam Nuts (H4) into the hole
s
of Drawer Sides (P8x2, P9x2). Make sure the opening on cam nuts point towards the incoming
cam bolts. Tighten with a Phillips Head Screwdriver.
(P8)
(P8)
(P8)
(P9)
(P9)
(P9)
(P11)
(P10)
(P7)
fantasticfurniture.com.au Page 9
Phillips Head
Screwdriver
H4
H4
H4
H4
H2
H2
H2
H2
x2
Step 10
x2
You will need
Step 11
Phillips Head
Screwdriver
8 x Medium
Screws (H2)

Attach 2 x Handles (H10) to Drawer Fronts (P7x2) with 2 x Handle Bolts (H11) by
tightening with the Phillips Head Screwdriver.
You will need
Step 13
x2
Attach 2 x DL Runners (H8) to Left Drawer Sides (P8x2) and 2 x DR Runners (H9) to Right
Drawer Side (P9x2) with 8 x Small Screws (H5) using a Phillips Head Screwdriver.
(P8)
(P7)
(P9)
fantasticfurniture.com.au Page 10
You will need
Step 12
8 x Small
Screws (H5)
Phillips Head
Screwdriver
2 x DR
Runners (H9)
2 x DL
Runners (H8)
x2
H5
H5
H11
H10
H5
H5 H9
H8
3 x Handle
Bolts (H11)
3 x Handles
(H10)
Phillips Head
Screwdriver