fantastic furniture Bermuda User manual

Bermuda
Lounge 1 Str Acacia
Fantasticfurniture.com.au
Version 1.0

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Care Tips for Timber Products & Textiles
Following the general care instructions below will help extend the life of
your product and keep them looking their best!
Timbers are a natural product and can require a little bit more maintenance
to help keep them looking fresh and new. Exposure to the elements will
cause all timbers to dry out over time, which may lead to some minor split-
ting on the surface. This is completely normal and not a product fault.
To keep the product looking new applying some pure Tung or Linseed oil
over all exposed timber parts will help rejuvenate the timber and minimise
any splitting or cracking. We recommend you do this at least once a year
before summer starts. Remember to test the oil first in a non-conspicuous
area, as it may impact the colour of the finish.
To increase the lifespan of your product we discourage prolonged or exces-
sive exposure to sunlight and other inclement weather, as well as substanc-
es like suntan oils and heavily chlorinated water as this may cause products
to fade, dry out or speed up the eects of wear and tear.
To clean textiles, use a dampened cloth with a mild soap and water solution,
rinsing with water and wiping o any excess as you go. Allow to thoroughly
dry. Avoid using bleach and other harsh, or abrasive chemicals as they can
damage the product. Clean up any liquid spills as soon as possible, as they
can stain the fabric or timber materials if let to dry.
We recommend storing the cushions in a cool and dry place when it rains
and when not being used.

fantasticfurniture.com.au Page 3
Assembly checklist
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Useful information
! Never use power tools unless specifically instructed. They can damage your components or hardware if used
incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting components back
to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to avoid scratching or
damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be used in as they may
not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for product care
instructions.
! If you are having any diffculties assembling your product, missing any hardware or components please visit our
website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
.\fhlqc23 assembly instructions\fhlqc 23.3001 assembly instruction artwork v1\ff-logo_vertical_black.jpg

Page 4
What you need
to assemble the product
Hardware pack
.\fhlqc23 assembly instructions\fhlqc 23.3001 assembly instruction artwork v1\mallet icon_001.png
Parts list
Back (P1)
Seat (P2)
Left Leg (P3)
Right Leg (P4)
Back Stretcher (P5)
Front Stretcher (P6)
Seat Cushion (P7)
Back Cushion (P8)
Seat (P2)
Left Leg (P3)
Back Cushion (P8)
Back (P1)
Right Leg (P4)
Seat Cushion (P7)
Back Stretcher (P5)
Front Stretcher (P6)
fantasticfurniture.com.au
Other Tools you need:
Rubber Mallet
8 x Long Screws
(H1)
2 x Bolts
(H3)
8 x Wood Buttons
(H5)
2 x Short Screws
(H2)
.\fhlqc23 assembly instructions\fhlqc 23.3001 assembly instruction artwork v1\ff-logo_vertical_black.jpg
..\..\..\onedrive\máy tính\bộ bản vẽ kèm ai khách fantastic 2023(24.030.23)\tem icon\logo fantastic 2.png
2x Allen Key
(H4)

Page 5
You will need
You will need
fantasticfurniture.com.au
You may now fully tighten all bolts.
Secure the seat (P2) to the left leg (P3) using 1 x long screw (H1) and 1 x short screw (H2), tightening by turning
clockwise using allen key (H4). Do not fully tighten.
1 x Allen Key (H4)
6 x Long Screws (H1)
2 x Long Screws (H1)
1 x Allen Key (H4)
1 x Short Screws (H2)
Note: We strongly recommend assembling this product
on a soft surface to minimise the risk of any damages.
Step 1
Step 2
Secure the back (P1) to the left leg (P3) using 1 x long screw (H1) , tightening by turning clockwise using allen key (H4).
1 x Short Screws (H2)
Align the wooden joints on the back stretcher (P5) ,front stretcher (P6) , seat (P2) and back (P1) into the holes
on the leg (P3) and right leg (H4) and push together.
(P1)
(P2)
(P3)
Do not fully tighten.
(H1)
(H4)
(H1)
(H1)
(H4)
(P3)
(P2)
(P6)
(P5)
(P1)
(H1)
(H1)
(H1)
(P4)
(H2)
(H1)
(H2) (H1)
(H2)
(P3)
(H2)
(P4)
Secure the back stretcher (P5) ,front stretcher (P6) , seat (P2) and back (P1) to the left leg (P3) and right leg (P4)
using 6 x long screws (H1) and 1 x short screws (H2), tightening by turning clockwise using allen key (H4).

Page 6
2 x Bolts (H3)
Bolt (H3)
fantasticfurniture.com.au
Secure the back (P1) to the seat (P2) using 2 x bolts (H3), tightening by
turning clockwise using allen key (H4). Ensure the bolts are fully tightened
and secure.
With assistance, carefully turn the lounge back upright.
Allen Key (H4)
Place seat cushion (P7) and back cushion (P8) onto the assembled frame as shown.
(P1)
(P2)
(H3)
(H4)
(H3)
1 x Allen Key (H4)
(P8)
(P7)
Step 3
Step 4
You will need

Page 7
You will need
8 x Wood Buttons (H5) Rubber Mallet
(H5)
Wood Button
Secure the seat cushion (P7) to the assembled frame using the ties provided as shown.
Cover all exposed bolts and screws on the left leg (P3) and right
leg (P4) using 8 x wood buttons (H5). Secure by tapping gently
with rubber mallet.
Step 5
Step 6
fantasticfurniture.com.au
(H5)
(P3)
(H5)
(H5)
(H5)
(H5)
(H5)
(H5)
(P4)

Job Complete!
fantasticfurniture.com.au
.\fhlqc23 assembly instructions\fhlqc 23.3001 assembly instruction artwork v1\ff-logo_vertical_black.jpg
..\..\..\onedrive\máy tính\bộ bản vẽ kèm ai khách fantastic 2023(24.030.23)\tem icon\logo fantastic 2.png
Step 7
Page 8
In the interest of our environment please dispose
of all packaging thoughtfully