fantastic furniture NIVA Tallboy 4 drawer User manual

Version 1.0
NIVA
Tallboy 4 drawer
fantasticfurniture.com.au
Required
Two People

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Page 2
Love it? Share it!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Warning: Ensure the wall strap is attached
to avoid serious injury
To avoid any serious of fatal injury, a wall strap has been provided with
this product to prevent toppling. We strongly recommend that this
product is permanently fixed to the wall or other suitable surface. Fixing
of what fixing device to use.
Fantastic buy! Share how it looks at home on Instagram
for you chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au
Page 4
What you need
to assemble the product
Other tools you need
Flat head screwdriver; Phillips head
screwdriver; Hammer; Mallet
Parts list
Box 1: Top Panel (P1); Bottom Panel (P4);
4 x Right Drawer Side (P12);
4 x Drawer Rail (P15); Hardware Pack.
Box2: Left Side Panel (P2); Right Side Panel (P3);
2 x Short Rail (P6); 2 x Long Rail (P7);
Metal Rail (P8); 2 x Front Rail (P9);
Back Panel (P10); 4 x Drawer Back (P13);
4 x Drawer Base (P14); Drawer Front (P16);
2 x Drawer Front (P17); Drawer Front (P18);
Back Rail (P19).
Top Panel (P1)
Back Panel (P10)
Left Side
Panel (P2)
Right Side
Panel (P3)
Bottom Panel (P4)
Leg (P5)
(P5)
(P5)
(P5)
Short Rail
(P6)
(P6)
Long Rail
(P7)
(P7)
Metal Rail
(P8)
Front Rail (P9)
Back Rail (P19)
(P9)
Left Drawer
Side (P11)
(P12)
(P11)
(P11)
(P11)
(P12)
(P12)
(P13)
Drawer back
(P13)
(P13)
(P13)
Drawer Base (P14)
(P14)
(P14)
(P14)
Drawer Rail (P15)
(P15)
(P15)
(P15)
Right Drawer
Side (P12)
Drawer Front (P16)
Drawer Front (P18)
Drawer Front (P17)
Drawer Front (P17)
Left Drawer

fantasticfurniture.com.au
Page 5
Hardware Pack
58 x Cam Bolts
(H1)
34 x Big Cam
Nuts (H2)
30 x Dowels
(H3)
24 x Small Cam
Nuts (H4)
4 x Screws
(H5)
25 x Nails
(H6)
4 x Felt Feet
(H7)
48 x Screws
(H8)
4 x Left Runner
Tracks (H9)
4 x Left Runners
(H10)
4 x Right Runner
Tracks (H11)
4 x Right Runners
(H12)
1 x Screw
(H13)
1 x Wall Strap
(H14)
2 x Flat Washers
(H15)
24 x Screws
(H17)
4 x Screws
(H18)

Step 1
Page 6fantasticfurniture.com.au
You will need
10 x Cam bolts
(H1)
Screw 10 x cam bolts (H1) into bottom panel (P4) as shown,
tighten with a Phillips head screwdriver.
Step 2
Phillips head
screwdriver
You will need
14 x Dowels
(H3) Mallet
Insert 3 x dowels (H3) into each short rail (P6) as shown.
Insert 4 x dowels (H3) into each long rail (P7) as shown.
Use a mallet to gently tap the dowels into place if needed.
(P4)
H1
(P7)
(P6)
H3
H1
H1
H1
H1 H1
H1
H1
H1
H1
(P6)
(P7)
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3

Step 3
Page 7fantasticfurniture.com.au
You will need
8 x Cam bolts
(H1)
Screw 2 x cam bolts (H1) into each leg (P5) using a Phillips head screwdriver.
Attach 1 x felt feet (H7) onto each leg (P5) as shown.
Step 4
Phillips head
screwdriver
You will need
4 x Big cam
nuts (H2)
Fit each short rail (P6) between 2 x legs (P5).
Insert 2 x big cam nuts (H2) each into short rail (P6).
Using a Flat head screwdriver, turn the big cam nuts (H2) clockwise to lock.
4 x Felt feet
(H7)
(P5)
H1
H1
H7
X4
Flat head
screwdriver
H2
(P5)
(P6) (P5)
(P5)
(P5)
(P6)
H2
H2
H2

Step 5
Page 8fantasticfurniture.com.au
You will need
Position 2 x long rail (P7) between the assembled unit as shown.
Insert 4 x big cam nuts (H2) into long rails (P7), using a Flat head screwdriver
turn clockwise to lock.
Step 6
You will need
10 x Big cam
nuts (H2)
Position the leg assembly onto bottom panel (P4), making sure the cam bolts on
the bottom panel (P4) are inserted into the holes on the leg assembly.
Insert 10 x big cam nuts (H2) into short rails (P6) and long rails (P7),
and turn clockwise to lock.
Carefully turn the unit over.
Flat head
screwdriver
Flat head
screwdriver
4 x Big cam
nuts (H2)
(P5)
(P7)
(P7)
H2
H2
H2
H2
(P5)
(P5)
(P5)
(P7)
(P7)
(P4)
(P6)
(P6)
H2
H2
H2
H2
H2
H2

Step 7
Page 9fantasticfurniture.com.au
You will need
Screw 4 x cam bolts (H1) into bottom panel (P4) as shown.
Fasten the legs (P5) through bottom panel (P4) with 4 x screws (H5) as shown.
Tighten all cam bolts and screws with a Phillips head screwdriver.
Step 8
You will need
8 x Dowels
(H3)
Mallet
4 x Screws
(H5)
4 x Cam bolts
(H1)
(P4)
Phillips head
screwdriver
Phillips head
screwdriver
H1
H1
H1
H1
H5
H5
H5
H5
H3
H3
(P9)
4 x Cam bolts
(H1)
H1
H1
H1
H1
(P1)
Using a mallet if needed, tap 4 x dowels (H3) into each front rail (P9).
Screw 4 x cam bolts (H1) into top panel (P1) as shown, using a Phillips head screwdriver.
2X

Step 9
Page 10fantasticfurniture.com.au
You will need
Insert 4 x dowels (H3) into left side panel (P2).
Screw 4 x cam bolts (H1) into left side panel (P2) as shown.
Attach 4 x left runner tracks (H9) to left side panel (P2) with 12 x screws (H8).
Using a Phillips head screwdriver, tighten all cam bolts and screws.
Step 10
You will need
Mallet
Phillips head
screwdriver
Phillips head
screwdriver
Insert 4 x dowels (H3) into right side panel (P3).
Screw 4 x cam bolts (H1) into right side panel (P3) as shown.
Attach 4 x right runner tracks (H11) to right side panel (P3) with 12 x screws (H8).
Using a Phillips head screwdriver, tighten all cam bolts and screws.
4 x Dowels
(H3)
4 x Cam bolts
(H1)
Mallet
4 x Dowels
(H3)
4 x Cam bolts
(H1)
12 x Screws
(H8)
4 x Left runner
tracks (H9)
12 x Screws
(H8)
4 x Right runner
tracks (H11)
Laminated
edge
H9
H1
H8
H8
H8
(P2)
H3
H3
H3
H3
H1
H1
H9
H9
H9
H9
H8
H8
H8
H3
H11
H3
H3
H3
H8
H11
H8
H8
Laminated
edge
H1
H1
H1
H11
H11
H11
(P3) H8
H8
H8

Step 11
Page 11fantasticfurniture.com.au
You will need
Move and align rails (P8) (P9) and (P19) to left side panel (P2).
Insert 4 x big cam nuts (H2) into rails (P9), (P19)
and turn clockwise to lock with flat head screwdriver.
Use 2 x screws (H18) to connect metal rail (P8) and left side panel (P2)
with Phillips head screwdriver.
Step 12
You will need
Phillips head
screwdriver
Move and align right side panel (P3) to rails (P8) (P9) and (P19).
Insert 4 x big cam nuts (H2) into rails (P9), (P19) and turn clockwise to lock
with a flat head screwdriver.
Use 2 x screws (H18) to connect metal rail (P8) and right side panel (P3)
with a Phillips head screwdriver.
Laminated
edge
4 x Big cam
nuts (H2)
2 x Screws
(H18)
Flat head
screwdriver
Phillips head
screwdriver
4 x Big cam
nuts (H2)
2 x Screws
(H18)
Flat head
screwdriver
(P2) (P8)
(P19)
(P9)
(P9)
H2
H2
H2
H18
(P3)
(P9)
(P9)
(P19)
H2
H2
H2
H18
(P8)
Required
Two People
Required
Two People

Step 13
Page 12fantasticfurniture.com.au
You will need
4 x Big cam
nuts (H2)
Flat head
screwdriver
(P2)
(P3)
Attach side panels (P2) & (P3) to bottom panel (P4).
Insert 4 x big cam nuts (H2) into side panels (P2) & (P3) and turn clockwise to lock
by using a Flat head screwdriver.
H2
H2
H2
Required
Two People
(P4)

Step 14
Page 13fantasticfurniture.com.au
You will need
4 x Big cam
nuts (H2)
Flat head
screwdriver
(P2)
(P3)
(P1)
H2
H2
H2
Attach top panel (P1) to side panels (P2) & (P3).
Insert 4 x big cam nuts (H2) into side panels (P2) & (P3),
using a Flat head screwdriver turn clockwise to lock.
Required
Two People

Step 15
Page 14fantasticfurniture.com.au
You will need
25 x Nails
(H6)
Hammer
No nail,
Hole for Wall Strap
(P4)
(P3)
(P2)
(P1)
Turn the tallboy over so the back rail (P19) is furthest from the ground
and closest to yourself.
Using a hammer, attach back panel (P10) to panels (P1) (P2) (P3) and (P4) with 25 x nails (H6).
(P10)
H6
Required
Two People
(P19)
(P3)
(P2)
(P2)
(P3)
(P4)
(P19)
(P1)

Step 16
Page 15fantasticfurniture.com.au
You will need
Step 17
You will need
Phillips head
screwdriver
Using a Phillips head screwdriver, screw each 6 x cam bolts (H1)
into drawer fronts (P16) (P17) and (P18).
4 x Right
runners (H12)
4 x Left
runners (H10)
24 x Cam bolts
(H1)
24 x Screws
(H8)
H10
H8
(P16)
Phillips head
screwdriver
H1
H1
H1
H1
H1
H1
H1
H1
H1
(P17)
H1
H1
H1 (P17)
(P18)
Attach each one left runner (H10)
to left drawer sides (P11) with 3 x screws (H8),
tighten with a Phillips head screwdriver.
Repeat three times for all left drawer sides (P11).
Attach each one right runner (H12) to right drawer sides (P12) with 3 x screws (H8),
tighten with a Phillips head screwdriver.
Repeat three times for all right drawer sides (P12).
H8
H8
H8
H12
H8 H8
H10
H8
H12
H8
x4
(P12)
(P11)

Step 18
Page 16fantasticfurniture.com.au
You will need
24 x Small
cam nuts (H4)
(P16)
X2
Flat head
screwdriver
Attach drawer sides (P11) & (P12) to
drawer fronts (P16) (P17) and (P18).
Attach drawer rails (P15) to
drawer fronts (P16) (P17) and (P18) by
inserting 24 x small cam nuts (H4) into
drawer sides (P11) (P12)
and drawer rails (P15), turn clockwise
to lock using a Flat head screwdriver.
H4
H4
H4
H4
H4
H4
(P17)
(P18) H4
H4
H4
(P15)
(P15)
(P15)
(P11)
(P11)
(P11)
(P12)
(P12)
(P12)

Step 19
Page 17fantasticfurniture.com.au
(P12)
Slide each drawer base (P14)
into the groove
in the drawer panels (P11), (P12)
and drawer fronts (P16) (P17) (P18).
Repeat with all drawer bases (P14).
(P12)
(P12)
(P14)
(P14)
(P14)
(P15)
(P15)
(P15)
(P11)
(P11)
(P11)
(P16)
(P17)
(P18)
x2

Step 20
Page 18fantasticfurniture.com.au
You will need
24 x Screws
(H17)
Phillips head
screwdriver
x4
Attach each drawer back (P13) to drawer sides (P11) & (P12)
and drawer rail (P15) with 6 x screws (H17), tighten with a Phillips head screwdriver.
Repeat for all drawer backs (P13).
H17
H17
H17
H17
H17
(P13) (P11)
(P12)
(P15)

Step 21
Page 19fantasticfurniture.com.au
Insert drawers into cabinet carefully as shown.
Slide drawer runners into position gently to avoid
damaging runners.
Note:Follow the correct order of these
four drawers as shown.
(P16)
(P17)
(P17)
(P18)

Step 22
Page 20fantasticfurniture.com.au
You will need
1 x Flat
washer (H15)
1 x Screw
(H13)
Phillips head
screwdriver
1 x Wall strap
(H14)
We strongly advise that you use the wall strap
provided to prevent the unit toppling.
Use screw (H13) to fix wall strap (H14) on top panel (P1) as shown,
tighten with a Phillips head screwdriver.
(P1)
(P10)
H14
H13
H15
H13
H14
H15