fantastic furniture VERONA User manual

Verona
Bookcase Lowline Large White

Recommended weight capacity: 35kgs/shelf

Page 3

Page 4

Hardware Pack
(P1)
(P2)
(P3)
(P4)
(P6)
(P6)
(P7)
(P7)
(P8) (P8)
(P8) (P8)
(P5)
Shelf Panel (P1) ;
Top Panel (P2) ;
Bottom Panel(P3);
Left Side Panel(P4) ;
Right Side Panel(P5) ;
2 x Divider Panels(P6);
2 x Back Panels(P7);
4 x Feet(P8)
8 x Long Bolts (H8)
1 x Allen Key A
(H6)
12 x Cam Nuts
(H2)
20 x Dowels
(H3)
4 x Washers
(H4)
4 x Bolts
(H5)
8 x Wedges
(H9)
4 x Felt Protectors
(H14)
12 x Cam Bolts
(H1)
8x Wedge Screws
(H10)
1 x Screw
(H13)
Wall Strap
1 x Wall Strap
(H12)
12 x Adhesive Screw
Covers(H11)
1 x Allen Key B
(H7)
2x Washers
(H15)
Page 5
Parts list

2 x Cam Bolts
(H1)
2 x Dowels
(H3)
(P1)
(H1)
(H3)
(H1)
(H3)
Phillips Head
Screwdriver
Insert 2 x Dowels (H3) into Shelf Panel (P1) and secure 2 x Cam Bolts (H1) to Shelf Panel (P1)
by tightening with the Phillips Head Screwdriver.
2 x Dowels
(H3)
(P6)
Insert 2 x Dowels (H3) into Divider Panel (P6)
Page 6

2 x Cam Nuts
(H2)
1 x
(H7)
Allen Key B
2 x
(H8)
Bolts
Phillips Head
Screwdriver
Insert 2 x Cam Nuts (H2) into first Divider Panel (P6) as shown. Rotate the cam nuts so
the arrows point towards the incoming cam bolts and attach Divider Panel (P6) to
Shelf Panel (P1) by tighteningthe cam bolts with the Phillips Head Screwdriver.
Attach second Divider Panel (P6) to Shelf Panel (P1) using
2 x Bolts (H8) by tightening with Allen Key B (H7)
(P1)
(P6)
(P6)
(P4)
(H1)
(H3)
(H1)
(H3)
4 x Cam Bolts
(H1)
4 xDowels
(H3)
Insert 2 x Dowels (H3) into Left Side Panel (P4) and secure 2 x Cam Bolts (H1) to Left
Side Panel (P4) by tightening with the Phillips Head Screwdriver.
Repeat steps for Right Side Panel (P5).
(P5)
(H1)
(H3)
(H1)
(H3)
(H1)
(H1)
(H7)
(H8)
(H8)
(H7)
Page 7
Phillips Head
Screwdriver

(P5)
(P4)
4 x Cam Nuts
(H2)
Phillips Head
Screwdriver
Insert 4 x Cam Nuts (H2) into Shelf Panel (P1) as shown. Rotate the cam nuts so the
arrows point towards the incoming cam bolts. Attach Side Panels (P4 and P5) to
Shelf Panel (P1) by tightening the cam bolts with the Phillips Head Screwdriver.
(P1)
Slide Back Panels (P7x2) into the grooves of Left Side Panel(P4) and Right Side
Panel(P5) and Shelf Panel (P1) as shown.
Ensure the high-gloss surface of Back Panels(P7) are facing inside
(P7)
(P7)
(P5) (P4)
(P1)
(H2)
(H2)
(H2)
(H2)
Page 8

9
7
8
6 x Dowels
(H3)
(P5)
(P4)
(P6)
Insert 6 x Dowels (H3) into Divider Panel (P6),Left Side Panel(P4),Right Side Panel(P5)
Attach Bottom Panel (P3) to Left Side Panel(P4) and Right Side Panel(P5) and Divider
Panel (P6) with 6 x Bolts (H8) by
tightening with Allen Key B (H7).
1 x
(H7)
Allen Key B 6 x
Bolts(H8)
(H8)
(H8)
(H8)
(H8)
(H8)
(H8)
(P5)
(P4)
(P6)
(P3)

10
9
10
4 x Washers
(H4)
4 x Bolts
(H5)
1 x Allen Key A
(H6)
Attach Feet (P8x4) to Bottom Panel (P3) with 4 x Washers (H4) and 4 x Bolts (H5) by
tightening with the Allen Key A (H6) as shown
(P6)
(P8)
(H4)
(H5)
(H6)
(P8)
(H4)
(H5)
(P8)
(H4)
(H5)
(P8)
(H4)
(H5)
4 x Felt Protectors
(H14)
Peel the backing off 4 x Felt Protectors (H14) so that the adhesive side is exposed.
Apply 4 x Felt Protectors (H14) to the bottom of Feet (P8x4).
(H14)
(P6)
(H14)
(H14)
(H14)
(P3)