fantastic furniture Mini Me Chair User manual

Chair
fantasticfurniture.com.au
Mini Me

fantasticfurniture.com.au
Page 2

fantasticfurniture.com.au
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Assembly checklist
Useful information
Page 3
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.

fantasticfurniture.com.au
What you need
to assemble the product
Parts list
Seat (P1)
Gas Lift (P3)
Decoration Cap (P4)
Star Base (P5)
5 x Castors (6)
Seat Plate (P2)
Seat (P1)
Seat Plate (P2)
Gas Lift (P3)
Decoration Cap (P4)
Star Base (P5)
5 x Castors (6)
Hardware pack
4xBolts
(H1)
Allen Key(H2)
Page 4

fantasticfurniture.com.au
Step 1
Insert 5 x castors into the star base (P5) one at a time as shown.Push down firmly
on each castor to ensure they are fixed into position.
Step 2
Gas lift (P3)
Decpration Cap(P4)
Star Base (P5)
Page 5
Remove the plastic cap from the top of the gas lift (P3).
Place the decoration cap (P4) over the top of the star base (P5).
Insert the gas lift (P3)through the decoration cap (P4)
and into the star base (P5) as shown.
Note:Make sure to remove the plastic
cap from the top of gas lift.

fantasticfurniture.com.au
Step 3
Allen Key
(H2)
4xBolts
(H1)
Bolt
(H1)
Allen Key
(H2)
Seat Plate(P2)
Seat (P1)
Align the holes of the seat plate (P2) to the holes of the underside of the seat (P1).
Attach the seat plate (P2) to the underside of the seat (P1)
with 4xbolts(H1) using an allen key (H2).
Step 4
Seat Plate (P2)
Gas Lift (P3)
Position the centre on the seat plate (P2) over the top of the gas lift (P3).
Carefully lower the seat (P1) onto the gas lift (P3).Carefully and
firmly press the seat down firmly to lock it into position.
Check the connection is secure before sitting in the chair. Page 6

fantasticfurniture.com.au
Step 5
Job Complete !
In the interest of our environment please dispose of all packaging thoughtfully.
Page 7