fantastic furniture Huntington User manual

Version 1.0
fantasticfurniture.com.au
Bed Queen
Huntington

fantasticfurniture.com.au Page 2Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

Footboard (P2) ; 2 x Side Rails (P3) ; 4 x Headboard and Footboard
What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver
Headboard
(P1)
Side Rails (P3)
Side Rails (P3)
Timber Cross Rail
(P7)
Footboard
(P2)
Headboard and Footboard
Leg(P4)
fantasticfurniture.com.au Page 4
Headboard (P1) ; 28 x Slats (P10)
Parts list
Box 1 :
Box 2 :
Legs (P4) ; Centre Rail (P5) ; 2 x Support Legs (P6) ; Timber Cross Rail (P7) ;
28 x End Connectors (P8) ; 14 x Centre Connectors (P9) ;
28 x End Connectors (P8) 14 x Centre Connectors (P9) 28 x Slats (P10)
Hardware pack
(Big Head Bolts)
(H1)
(Allen Key)
(H2)
(Screws)
(H3)
(Bolts)
(H4)
(Washers)
(H5)
(Felt Pad)
(H6)
Hardware Pack
8 x M8 x 18mm 1 x M5 2 x M4 x 32mm 6 x M8 x 20mm 6 x M8 x19mm
1 x 40 x 20 x 3mm
Headboard and Footboard
Leg(P4)
Centre Rail (P5)
Support Leg (P6)
Support Leg (P6)

fantasticfurniture.com.au Page 5
Step 1
(P1)
(P4)
Attach 2 x headboard legs (P4) to the bottom of headboard (P1) and rotate clockwise
Step 2
(P2)
to secure.
Attach 2 x footboard legs (P4) to the bottom of footboard (P2) and rotate clockwise
to secure.
(P4)
(P4)
(P4)

fantasticfurniture.com.au Page 6
Step 3
Insert 8 x big head bolts (H1) into the brackets of the headboard (P1) and footboard (P2),
and tighten two thirds of the way with the allen key (H2) as shown.
Attach 2 x side rails (P3) to the headboard (P1) and footboard (P2) by slotting the brackets
on the side rails over the bolts as shown. Do not fully tighten the bolts yet.
You will need
Allen Key x M5
(H2)
8 x Bolts x 18mm
(H1)
(H1)
(P3)
(P3)
(P1)
(P2)
(P3)
(P1) (P2)
(H2)

fantasticfurniture.com.au Page 7
Step 4
You will need
2 x Washers x M8
(H5)
2 x Bolts x 20mm
(H4)
Allen Key x M5
(H2)
Step 5
(P6)
(H2)
(H4)
(H5)
there is a gap of 10mm between the bottom
Adjust the support legs (P6) so
Insert the centre rail (P6) between the headboard (P1) and footboard (P2) as shown.
Secure using 4 x bolts (H4) and 4 x washers (H5), tightening with the allen key (H2).
Do not fully tighten the bolts yet.
of the legs and the floor.
Attach 2 x support legs (P6) to the centre rail (P5) as shown using 2 x bolts (H4) and 2 x
washers (H5), tightening with allen key (H2).
(P1)
(H5)
(H4)
(H2)
(P6)
(P5)
(P3)
(P3)
(P2)
(P5)
You will need
4 x Washers x M8
(H5)
4 x Bolts x 20mm
(H4)
Allen Key x M5
(H2)

fantasticfurniture.com.au Page 8
Step 6
You will need
28 x End
Connectors
(P8)
14 x Centre
Connectors
(P9)
28 x Slats
(P10)
(P8) (P8)
(P9)
1
(P10) (P10)
2
3
Sometimes it makes it easier to line up the
hole if you press down in the middle of the
slat to flatten it out.
as shown.
Connect 2 x End Connectors (P8), 2 x slats (P10) and a Centre Connector (P9) together
Insert the full slat into the side rails (P3) and the centre rail (P5) by pressing down firmly.
(P1)
(P3)
(P3)
(P2)
(P5)

(H3)
(H6)
Page 9
fantasticfurniture.com.au
Step 7
4
Repeat for every bed slat until finished.
You will need
2 x Screws x 32mm
(H3)
Phillips Head
Screwdriver
(H2)
Allen Key x M5 Felt Pad
(H6)
Ensure the inner space is square.
Attach the felt pad (H6) to the centre of the centre rail (P5) as shown. Secure the timber cross
fully with the Phillips Head Screwdriver.
rail (P7) into place in the centre of the side rails (P3) using 2 x screws (H3), and tightening
You may now fully tighten all bolts on the headboard (P1), footboard (P2) and side
rails (P3).
(H2)
(P5)
(P7)
Make sure screws (H3)
are fully tightened.
(P7)
1 x 40 x 20 x 3mm

Step 8
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
fantasticfurniture.com.au Page 10