fantastic furniture Sonoma Robe 2 Door User manual

fantasticfurniture.com.au
Sonoma
Version 1.0
Robe 2 Door

Page 2
Looks
like you’ve found
your Fantastic!
We’re
thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love
fantasticfurniture.com.au
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Weight Limit: 20kgs per shelf
Warning: Ensure the wall strap is
attached to avoid serious injury.
To avoid any serious or fatal injury, a wall strap has been provided with
this product to prevent toppling. We strongly recommend that this
product is permanently fixed to the wall or other suitable surface. Fixing
of what fixing device to use.

fantasticfurniture.com.au Page 3
Read through the instructions
carefully before you begin.
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screwsuntil the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a so t surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
components please visit our website Help Centre for further assistance.
Assembly Checklist
!Please see page 2for any safety requirements or weight restrictions.
Useful information

Page 4
fantasticfurniture.com.au
What You Need
to assemble the product
Hardware list:
2 x Washers
(H17)
Box 1:
Top Panel
Other tools you need
Phillips Head screwdriver;Hammer
G
G
Side Panel(L)
(P1)
Side Panel(R)
(P2)
(P3)
Bottom Panel
(P4)
Fixed Panel
(P5)
Back Panel
Back Panel
Back Support Panel
Door Panel
Door Panel
(P6)
(P6)
(P7)
(P7)
(P8)
(P8)
(P9)
(P9) Lower Frame
Lower Frame
Base Rail
Base Rail
(P10)
(P10)
Top Panel (P3)
Bottom Panel (P4)
Fixed Panel (P5)
2 x Back Support Panel (P6)
2 x Lower Frame (P8)
2 x Base Rails (P9)
Side Let Panel (P1)
Side Rigth Panel (P2)
2 x Back Panel (P7)
2 x Door Panel (P10)
16X Screws (H2) (H3) (H4) (H5) (H7)
(H16)
(H15)
(H14)
(H8)
12X Plastic Caps 20X Plastic Dowels 8X Hinges 50X Screws 2X Metal Handle 4X Screws 50X Nails
18X Screws 1X Wall Strap 1X Screw
(H6)
(H1)
2X Hanger Rod
14X Screws (H10)
(H9) 1X Allen Key Holder (H11) 1X Hanger Rod
(H12) (H13)
Box 2:
1X Door Stop
Box 1:
Back Support Panel
(H18)
1 x Levelling Wedge

Page 5
fantasticfurniture.com.au
Step 1
Step 2
You will need
You will need
(H4) (H5)
8X Hinges 16X Screws
Phillps head
Screwdriver
(H7)
2X Metal Handle 4X Screws
(H6)
(H3)
12X Plastic Dowels
(P10)
(H5)
(H4)
(H7)
(H6)
(P6)
(P6)
(P5)
(H3)
(H3) (H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H5)
(H4)
(H5)
(H4) (H7)
(H6)
(H5)
(H4)
(H7)
(H5)
Fix 4 x Hinges (H4) to Door Panel (P10) using 8 x Screws (H5) by tightening with the Phillps
Head Screwdriver.
Repeat for 2nd Door Panel ( P10).
Insert 12 x Plastic Dowels (H3) to Panels (P6x2, P5) one by one.
x 2
Fix Metal Handle (H6) to pre-drilled holes using 2 x Screws (H7), tighten with a Phillips Head
Screwdriver.

Page 6
You will need
Step 4
You will need
Step 3
(H3) (H5)
8X Plastic Dowels 2X Screws
2X Hanger Rod
Holder (H11) Phillps head
Screwdriver
8X Screws (H2)
8X Plastic Caps
(H1)
Phillps head
Screwdriver
(P1)
(P2)
(H11) (H5)
(P1)
(P2)
(P6)
(P6)
(P5)
(H1)
(H2)
(H1)
(H2)
(H1)
(H2)
(H1)(H2)
(H1)(H2)
(H1)
(H2)
(H1)
(H2)
(H1)
(H2)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3) (H3)
(H11) (H5)
(P6)
(P2)
(H2) (H1)
Fix 2 x Hanger Rod Holders (H11) to Side Panels (P1 & P2) as shown with 2 x Screw (H5) by
tightening with the Phillps Head Screwdriver.
Insert 8 x Plastic Dowels (H3) to Side Panels (P1&P2) one by one.
Fix Back Support Panels (P6x2) to Side Panel (P1) with 8 x Screws (H1),
Use Plastic Caps (H2) to cover the screws (H1).
Ensure the raw edges of the
shelves are facing towards
the back of the unit
fantasticfurniture.com.au
Repeat for Side Panel (P2).

1X Door Stopper
(H2)
Page 7
fantasticfurniture.com.au
You will need
Step 5
Step 6
Phillps head
Screwdriver
You will need
8X Screws (H2)
4X Plastic Caps
(H1)
Phillps head
Screwdriver
(H14)
2X Screw
(H13)
(H14)
(H1)
(H1)
(H1)
(H2)
(H1)
(H1)
(H1)
(H1)
(H2)
(H2)
(H1)
(P4)
(P3)
(P3)
(H13)
(H14)
(H13)
(H14)
Ensure the Door Stopper (H13)
against the Back Brace Panel (P6)
and lie in front of the unit.
Attach Door Stop (H13) to Top Panel (P3) with 2 x Screws (H14) as shown by tightening with
the Phillps Head Screwdriver.
Fix Top and Bottom Panel (P3 & P4) to Side Panels (P1 & P3) with 8 x Screws (H1) by
tightening with the Phillps Head Screwdriver.
(H2)
(H1)
(P3)
(P1)
(P2)
Place 4 x Plastic Caps (H2) on top of the 4 x Screws (H1) in Top Panel (P3) as shown.

Page 8
Step 7
Step 8
You will needYou will need
fantasticfurniture.com.au
You will need
(H10)
8X Screws 1X Allen Key
(H9)
(H8)
50X Nails
5
5
(H8)
(H14)
(H8)
(H14)
(H8)
(H8)
WARNING:ENSURE THE WALL STRAP IS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury, this product has been
fittedwith a wall strap to prevent toppling. We strongly
recommendthat this product is permanently fixed to the
wallor other suitable surface. Fixingdevices are not
includedsince different surface materials require
differentattachments. Pleaseseek professional advice
ifyou are in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71Seville Street
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123
WARNING:ENSURE THE WALL STRAP IS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury, this product has been
fittedwith a wall strap to prevent toppling. We strongly
recommendthat this product is permanently fixed to the
wallor other suitable surface. Fixingdevices are not
includedsince different surface materials require
differentattachments. Pleaseseek professional advice
ifyou are in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71Seville Street
FAIRFIELDEASTNSW 2165
AUSTRALIA
PO#:ABC123
(H9)
(H9)
(H9)
(H9)
(P7)
(P7)
(P8)
(P8)
(P9)
(P9)
(P8)
(P9) (H9)
(H9)
Hammer
(H14)
16X Screws
Phillps head
Screwdriver
Fix Back Panel (P7) to Fixed Shelves (P5) and Back Support Panel (P6) with 16 x Screws (H14),
tighten Screws with a Phillips Head Screwdriver.
(H10)
Ensure the raw edge
of back panel is facing
outwards
Pre-drilled guide
holes for
Screw(H14)
Attach Base Rails (P9x2) with Lower Frame (P8x2)
as shown with 8 x Screws (H9) by tightening with Allen Key (H10).
Using a Hammer, fix Back Panel (P7) to assembled unit using 50 x Nails (H8).

Page 9
fantasticfurniture.com.au
You will need
Step 10
You will need
Step 9
1X Hanger Rod
(H12)
6X Screws (H10)
(H9) 1X Allen Key
(P9)
(P8)
(P8)
(P9)
(P4)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
WARNING:ENSURE THE WALL STRAP IS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury, this product has been
fittedwith a wall strap to prevent toppling. We strongly
recommendthat this product is permanently fixed to the
wallor other suitable surface. Fixingdevices are not
includedsince different surface materials require
differentattachments. Pleaseseek professional advice
ifyou are in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71Seville Street
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123
WARNING:ENSURE THE WALL STRAP IS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury, this product has been
fittedwith a wall strap to prevent toppling. We strongly
recommendthat this product is permanently fixed to the
wallor other suitable surface. Fixingdevices are not
includedsince different surface materials require
differentattachments. Pleaseseek professional advice
ifyou are in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71Seville Street
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123
(H12)
(H12)
(H9)
(P4)
(P9) (H10)
Place Hanger Rod (H12) into Hanger Rod Holder (H11).
Fix assembled base frame to assembled unit using 6 x Screws (H9) ,by tightening with
Allen Key (H10).

Fix Door Panels (P10x2) to Side Panels (P1,P2) using 32 x Screws (H5) by tightening
Page10
fantasticfurniture.com.au
Step 11
You will need
(H5)
32X Screws Phillps head
Screwdriver
(H5)X4
(H5)X4
(H5)X4
(H5)X4
(H5)
(P10)
(P10) (P10)
(P2)
(P2)
(P1)
with the Phillips Head Screwdriver.