fantastic furniture WILLOW BED DOUBLE User manual

Assembly Instructions
WILLOW BED DOUBLE

WHAT YOU NEED
To assemble the body
Bed Head
(P1)
2 x Side Rails
(P3)
Center Rail
Allen Key provided
2 x Head/Foot Rail
(P5)
(P4)
Bed Foot
(P2)
13 x Long
Plastic
26 x Short Plastic
Connectors
Connectors
(P7)
8 x Long Bolts
(H1)
(P6)
4 x Nylon nut
(H2)
8 x Short Bolts
(H3)
26 x Fantastic Furniture
ComfortSlats (P8)
Please make sure you have all these parts before you start.
Page 2

Step 1
1.
You will need
2 x BoltS
(H3)
2.
1 x Allen key
Attach one Side Rail (P3) to the Bed Head (P1) with Bolts (H1). Do not fully tighten Bolts
Step 2
1.
2.
1 x Allen key
Page 3
Attach one Side Rail (P3) to the Bed/Foot (P2) with Bolts (H3). Leave bolt loose.
You will need
2 x Bolts
(H3)

Step 3
You will need
4 x Bolts
(H3)
1 x Allen Key
Attach the other Side Rail (P3) to the Bed Head and Bed/Foot with 4 x Bolts (H3) in the
upper holes. Leave bolts loose
Step 4
1 x Allen Key
Attach two Head/Foot Rail (P4) to the Side Rail (P3) with 4 x Bolts
(H1) in the upper holes. Leave bolts loose
Page 4
You will need
4 x Bolts
(H1)

(P6) (P7)
Step 5
Attach the Center Rail (P5) to the Head/Foot Rail (P4) with 4 x Bolts (H1) and 4 x Nylon
nut (H2) in the upper holes. Leave bolts loose
Step 6
(P8) (P8)
Push 26 x Short Plastic Connectors (P6) firmly
onto 26 x Fantastic Furniture ComfortSlats
(P8) . Then push 26 x Fantastic
Furniture ComfortSlats (P8) firmly onto
13 x Long Plastic Connectors (P7)
Page 5
(P6)
YOU WILL NEED
26 X Short Plastic
Connectors
(P6)
13 X Long Plastic
Connectors
(P7)
26 x Fantastic Furniture
ComfortSlats
(P8)
You will need
4 x Bolts
(H1)
4 x Nylon nut
(H2)

Step 7a
Place the slat in position then push down on the
centre of the slat to flatten out the slat. Make
Step 7b
Repeat the same process for the
other end of the slat
sure the plastic prong lines up with the hole.
Then push firmly
Step 7c
Then push down on the centre of the Long Plastic Connectors
Page 6

Step 8
Repeat for every bed slat until finished
Step 9
1xAllen Key
IMPORTANT :Fully tighten all bolts on bed
The job is now complete !
In the interest of our environment
Please dispose of all packaging thoughtfully.
Page 7