fantastic furniture NIVA User manual

Version 1.0
NIVA
Dresser
fantasticfurniture.com.au
Required
Two People

Secure it!
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY
OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
•Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
•Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
•Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
•Avoid putting a TV on this product.
Reduce the risk of furniture
tip-over accidents
Page 2
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.

fantasticfurniture.com.au
Page 3
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram for
for your chance to win a $250 Fantastic FurnitureGift Card!
@fantasticfurniture
Looks like you’ve found
your Fantastic!
Love it? Share it!

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au
Page4

Parts list
Box 1: Top Panel (P1); Left Side Panel (P2); Right Side Panel (P3); Bottom Panel (P4); 4 x Leg (P5);
2 x Short Rail (P6); 2 x Long Rail (P7); Metal Rail (P8); 2 x Front Rail (P9); Back Panel (P10);
Big Middle Leg (P23); Small Middle Leg (P24); Back Rail (P25); Hardware Pack.
Box 2: 6 x Drawer Left Side (P11); 6 x Drawer Right Side (P12); 6 x Drawer Back (P13); 6 x Drawer Base (P14);
6 x Drawer Rail (P15); Divider Panel (P16); Drawer Front (P17); Drawer Front (P18); Drawer Front (P19);
Drawer Front (P20); Drawer Front (P21); Drawer Front (P22).
What you need
to assemble the product
Othe tools you need
Flat head screwdriver; Phillips head
screwdriver; Hammer; Mallet
fantasticfurniture.com.au
Page 5
Top Panel (P1)
Left Side
Panel
(P2)
Right Side
Panel (P3)
Bottom Panel (P4)
Leg
(P5)
Drawer Front
(P17)
Leg
(P5)
Leg
(P5)
Leg
(P5)
Short Rail
(P6)
Short Rail
(P6)
Long Rail (P7) Long Rail (P7)
Metal Rail
(P8) Front
Rail
(P9)
Front Rail
(P9) Back Panel
(P10)
Divider
Panel
(P16)
Drawer Front
(P18)
Drawer Front
(P19)
Drawer Front
(P20)
Drawer Front
(P21)
Drawer Front
(P22)
Big Middle
Leg (P23)
Small Middle
Leg (P24)
x6
Drawer Left
Side (P11)
Drawer Right
Side (P12)
Drawer Back
(P13)
Drawer Base (P14)
Drawer Rail
(P15)

fantasticfurniture.com.au
Page 6
Hardware Pack
71 x Cam Bolts
(H1)
37 x Big Cam
Nuts (H2)
38 x Dowels
(H3)
36 x Small Cam
Nuts (H4)
34 x Nails
(H6)
6 x Left Runner
Tracks (H9)
6 x Left Runners
(H10)
6 x Right Runner
Tracks (H11)
6 x Right Runners
(H12)
2 x Wall Straps
(H14)
4 x Flat Washers
(H15)
63 x Screws
(H8)
9 x Screws
(H21)
43 x Screws
(H17)
4 x Screws
(H18)
2 x Screws
(H13)
4 x Screws
(H5)
4 x Felt Feet
(H7)
1 x Adjustable
Foot (H16)
2 x Long
Dowels (H19)
1 x Long Cam
Bolt (H20)

Step 1
Page 7
fantasticfurniture.com.au
You will need
13 x Cam bolts
(H1)
Using a Phillips head screwdriver, screw 13 x cam bolts (H1) into bottom panel (P4) as shown.
Step 2
Phillips head
screwdriver
You will need
14 x Dowels
(H3) Mallet
Insert 3 x dowels (H3) into each short rail (P6) as shown.
Insert 4 x dowels (H3) into each long rail (P7) as shown.
Use a mallet to gently tap the dowels into place if needed.
(P4)
(P7)
(P6)
H1
(P6)
(P7)
H3
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1
H3
H3
H3
H3
H3 H3
H3
H3
H3
H3
H3
H3
H3

Step 3
Page 8
fantasticfurniture.com.au
You will need
8 x Cam bolts
(H1)
Screw 2 x cam bolts (H1) into each leg (P5) using a Phillips head screwdriver.
Attach 1 x felt feet (H7) onto each leg (P5) as shown.
Step 4
Phillips head
screwdriver
You will need
4 x Big cam
nuts (H2)
Fit each short rail (P6) between 2 x legs (P5).
Insert 2 x big cam nuts (H2) each into short rail (P6).
Using a Flat head screwdriver, turn the big cam nuts (H2) clockwise to lock.
4 x Felt feet
(H7)
(P5)
H1
H1
H7
X4
Flat head
screwdriver
H2
(P5)
(P6) (P5)
(P5)
(P5)
(P6)
H2
H2
H2

Step 5
Page 9
fantasticfurniture.com.au
You will need
Position 2 x long rail (P7) between the assembled unit as shown.
Insert 4 x big cam nuts (H2) into long rails (P7), and turn clockwise to lock.
Step 6
You will need
10 x Big cam
nuts (H2)
Position the leg assembly onto bottom panel (P4), making sure the cam bolts on
the bottom panel (P4) are inserted into the holes on the leg assembly.
Insert 10 x big cam nuts (H2) into short rails (P6) and long rails (P7),
and turn clockwise to lock using a Flat head screwdriver.
Carefully turn the unit over.
Flat head
screwdriver
Flat head
screwdriver
4 x Big cam
nuts (H2)
(P5)
(P7)
(P7)
H2
H2
H2
H2
(P5)
(P5)
(P5)
(P7)
(P7)
(P4)
(P6)
(P6)
H2 H2
H2 H2
H2 H2
Required
Two People

Step 7
Page 10
fantasticfurniture.com.au
You will need
Insert 2 x dowels (H3) into small middle leg (P24) and big middle leg (P23).
Attach small middle leg (P24) to big middle leg (P23) with 1 x screw (H17), tighten with
a Phillips head screwdriver.
Step 8
You will need
3 x Big cam
nuts (H2)
1 x Screws
(H17)
2 x Dowels
(H3)
Phillips head
screwdriver
Flat head
screwdriver
H3
1 x Adjustable
foot (H16)
H16
Attach middle legs (P23) & (P24) to bottom panel (P4).
Insert 3 x big cam nuts (H2) into middle legs (P23) & (P24), and turn clockwise to lock.
Screw 1 x adjustable foot (H16) to big middle leg (P23).
Mallet
H3
H17
(P24) (P23)
(P23)
(P24)
(P23)
(P24)
(P23)
(P24)
(P4)
H2
H2

Step 9
Page 11
fantasticfurniture.com.au
You will need
Screw 4 x cam bolts (H1) into bottom panel (P4) as shown,
tighten with a Phillips head screwdriver.
Screw 4 x screws (H5) into bottom panel (P4), tighten with a Phillips head screwdriver.
Step 10
You will need
Mallet
Phillips head
screwdriver
Phillips head
screwdriver
Insert 2 x dowels (H3) into each front rail (P9) as shown.
Screw 8 x cam bolts (H1) into top panel (P1), tighten with a Phillips head screwdriver.
4 x Cam bolts
(H1)
4 x Dowels
(H3)
8 x Cam bolts
(H1)
4 x Screws
(H5)
H5
(P4)
Laminated
edge
H1
H1
H1
H1
H1
H5
H5
H5
(P9)
(P1)
(P9)
H3
H3
H1
H1
H1
H1
H1
H1

Step 11
Page 12
fantasticfurniture.com.au
You will need
Insert 4 x dowels (H3) into left side panel (P2).
Attach 3 x left runner tracks (H9) to left side panel (P2) with 9 x screws (H8)
using a Phillips head screwdriver.
Insert 1 x cam bolt (H1) into left side panel (P2) using a Phillips head screwdriver.
Step 12
You will need
Phillips head
screwdriver
Insert 4 x dowels (H3) into right side panel (P3).
Attach 3 x right runner tracks (H11) to right side panel (P3) with 9 x screws (H8)
using a Phillips head screwdriver.
Insert 1 x cam bolt (H1) into right side panel (P3) using a Phillips head screwdriver.
Laminated
edge
1 x Cam bolt
(H1)
9 x Screws
(H8)
Mallet
(P2)
H1
3 x Left runner
tracks (H9)
4 x Dowels
(H3)
H9
H8
H1
H8H8
H9
H9
H9
H8
H3
H3
H3
H3
H8
H8
H8
H8
H8
H8
H8
H8
Phillips head
screwdriver
1 x Cam bolt
(H1)
9 x Screws
(H8)
Mallet
3 x Right runner
tracks (H11)
4 x Dowels
(H3)
H11
H8 H8H8
Laminated
edge
(P3)
H11
H8
H3
H11
H11
H3
H3
H3
H8
H8
H8
H8
H8
H8
H8
H8

Step 13
Page 13
fantasticfurniture.com.au
You will need
Insert 6 x dowels (H3) into divider panel (P16).
Attach 3 x left runner tracks (H9) to divider panel (P16) with 9 x screws (H21).
Turn over the divider panel.
Attach 3 x right runner tracks (H11) to divider panel (P16) with 9 x screws (H8).
Attach all screws using a Phillips head screwdriver.
Step 14
You will need
9 x Screws
(H21)
Insert 4 x dowels (H3) into back rail (P25).
Attach back rail (P25) to divider panel (P16) with 2 x screws (H17),
tighten with a Phillips head screwdriver.
Laminated
edge
6 x Dowels
(H3)
9 x Screws
(H8)
Mallet
3 x Left runner
tracks (H9)
3 x Right runner
tracks (H11
)
H9
Phillips head
screwdriver
4 x Dowels
(H3)
2 x Screws
(H17)
Mallet
Cam Nut holes
face up
H3
Phillips head
screwdriver
Laminated
edge
H3
H3
H3
H17
H17
(P16)
(P25)
H3
H9
H9
H9
H3
H3
H3
H3
H3
(P16)
(P16)
68
68
H8 H21
H8 H21
H21
H21
H21
H21
H21
H21
H21
H21
H11
H11
H11
H11
H8 H8
H8
H8
H8
H8
H8
H8

Step 15
Page 14
fantasticfurniture.com.au
You will need
Attach front rails (P9) to divider panel (P16) with 2 x long dowels (H19)
and 1 x long cam bolt (H20) as shown, tighten with a Flat head screwdriver.
Insert 2 x big cam nuts (H2) into rails (P9) and turn clockwise to lock.
Step 16
You will need
Attach side panels (P2) & (P3) to rails (P9) & (P8) as shown.
Use 4 x screws (H18) to connect metal rail (P8) and side panels (P2) & (P3),
tighten with a Phillips head screwdriver.
Insert 2 x big cam nuts (H2) into rails (P9) and turn clockwise to lock.
Laminated
edge
2 x Long
dowels (H19)
1 x Long cam
bolt (H20)
2 x Big cam
nuts (H2)
Phillips head
screwdriver
2 x Big cam
nuts (H2)
4 x Screws
(H18)
(P9)
Flat head
screwdriver
Required
Two People
(P9)
(P16)
(P25)
H2
H20
H2
H19
H19
Flat head
screwdriver
H18
(P2)
(P3)
H18
H2
H2
(P9)
(P9)
(P8)

Step 17
Page 15
fantasticfurniture.com.au
You will need
4 x Big cam
nuts (H2)
Attach panels (P2) (P3) (P16) and back rail (P25) to bottom panel (P4).
Insert 4 x big cam nuts (H2) into side panels (P2) & (P3) and turn clockwise to lock.
Using a Phillips head screwdriver, screw 4 x screws (H17) into bottom panel (P4).
(P2)
Phillips head
screwdriver
Flat head
screwdriver
4 x Screws
(H17)
Required
Two People
(P3)
(P25)
(P16)
(P4)
H17
H17
H2
H2
H2

Step 18
Page 16
fantasticfurniture.com.au
You will need
Position top panel (P1) onto panels (P2) (P3) (P16) and back rail (P25).
Insert 8 x cam nuts (H2) into panels (P2) (P3) (P16) and back rail (P25),
using a Flat head screwdriver turn clockwise to lock.
H2
(P2)
8 x Big cam
nuts (H2)
Flat head
screwdriver
Required
Two People
H2
H2
H2
H2
(P3)
(P4)
(P16)
(P25)
(P1)

Step 19
Page 17
fantasticfurniture.com.au
You will need
34 x Nails
(H6)
(P1)
Using a hammer, attach back panel (P10) to panels (P1) (P2) (P3) (P4) and (P25)
with 36 x nails (H6).
H6
Required
Two People
Hammer
(P2)
(P25)
(P10)
(P4)
(P3)
No nail,
holes for wall strap.

Step 20
Page 18
fantasticfurniture.com.au
You will need
Attach each one left runner (H10) to
left drawer sides (P11) with 3 x screws (H8),
tighten with a Phillips head screwdriver.
Repeat five times for all left drawer sides (P11).
Attach each one right runner (H12) to
right drawer sides (P12) with 3 x screws (H8), tighten with a Phillips head screwdriver.
Repeat five times for all right drawer sides (P12).
Step 21
You will need
36 x Screws
(H8)
Using a Phillips head screwdriver, screw each 6 x cam bolts (H1) into
drawer fronts (P17) (P18) (P19) (P20) (P21) and (P22).
6 x Left runner
(H10)
6 x Right runner
tracks (H12
)
Phillips head
screwdriver
36 x Cam bolts
(H1)
Phillips head
screwdriver
H8
6x
H10
H12
(P11)
(P12)
H8 H8H8
H8 H8
H8
H12
H10
H8
H8
H8
H8
H8
H1
(P17)
(P18)
(P19)
(P20)
(P21)
(P22)
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1

Step 22
Page 19
fantasticfurniture.com.au
You will need
Attach drawer sides (P11) & (P12) and drawer rail (P15) to drawer front (P17).
Insert 6 x small cam nuts (H4) into drawer sides (P11) & (P12) and drawer rail (P15),
turn clockwise to lock.
Repeat five times for others drawer fronts (18) (19) (20) (21) (22).
Step 24
You will need
Attach each drawer back (P13) to drawer sides (P11) & (P12) and drawer rail (P15)
with 6 x screws (H17), tighten with a Phillips head screwdriver.
Repeat for all drawer backs (P13).
36 x Small cam
nuts (H4)
Phillips head
screwdriver
36 x Screws
(H17)
H4
Flat head
screwdriver
(P11)
(P12)
(P15)
(P18)/(P19)
(P20)/(P21)/(P22)
(P17)
H4
x6
Step 23
Slide each drawer base (P14) into the groove
in the drawer panels (P11), (P12) and
drawer fronts. Repeat with all drawer bases (P14). x6
x6
(P14)
(P11)
(P13)
(P12)
(P15)
H17
H17
H17