fantastic furniture Cove User manual

Cove
Lowline 1600mm
fantasticfurniture.com.au
Version 1.0

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 30kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Bottom Panel (P2);
Left Side Panel (P3);
Right Side Panel (P4);
Divider (P5);
Divider (P6);
2 x Back Panels (P7);
Back Panel (P8);
Door (P9);
Door (10);
4 x Legs (P11);
2 x Middle Legs (P12)
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
DO NOT USE
fantasticfurniture.com.au
Top Panel
(P1)
Left Side
Panel (P3)
Right Side
Panel (P4)
Bottom Panel
(P2)
Back
Panel (P7)
Back
Panel (P8)
Back
Panel (P7)
Divider
(P6)
Divider
(P5)
Door
(P9)
Door
(P10)
Leg
(P11)
Middle Leg
(P12)
8 x Cam
Bolts (H3)
8 x Cam
Nuts (H4)
16 x Dowels
(H1)
32 x Small
Screws (H5)
4 x Clips
(H6)
4 x Wheels
(H7)
4 x Plastic
Glides (H9)
2 x Adjusters
(H8)
8 x Screws
(H2)
2 x Screws
(H13)
2 x Safety
Straps
(H12)
4 x Washers
(H14)
8 x Wedges
(H10)
8 x Wedge
Screws
(H11)
x4 x2
28 x Screws
(H15)
4 x Brackets
(H16)
2 x Brackets
(H17)

You will need
Step 1
Insert 8 x Dowels (H1) into Top Panel (P1). Insert 8 x Cam Nuts (H4) into Left & Right Side
Panel (P3 & P4) and Dividers (P5, P6) as shown. Rotate the cam nuts so the arrow points
towards the incoming cam bolts. Attach Left & Right Side Panel (P3 & P4) and
Dividers (P5, P6) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
8 x Cam Bolts
(H3)
8 x Dowels
(H1)
8 x Cam Nuts
(H4)
Page 5
fantasticfurniture.com.au
Step 2
You will need
Attach 8 x Cam Bolts (H3) to Top Panel (P1) as shown. Tighten with a Phillips Head Screwdriver.
(P1)
(P1)
(P3)
(P4)
(P6)
(P5)
Phillips Head
Screwdriver
H3
H3
H3
H3
H3
H3
H3
H3
H1
H1
H1
H1
H1
H1
H1
H1
H4
H4
H4
H4
H4
H4
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Note: ensure the grooves on
the Top Panel (P1), Left & Right
Side Panels (P3 & P4) and
Dividers (P5, P6) align as shown.

Step 3
Insert 8 x Dowels (H1) into the Left & Right Side Panels (P3 & P4) and Dividers (P5, P6).
With assistance, carefully align the Bottom Panel (P2) onto the assembled
frame as shown. Secure together with 8 x Screws (H2), tightening using a
Phillips Head Screwdriver,
Slide Back Panels (P7 x 2, P8) into the grooves between Left & Right Side Panel (P3 & P4)
and Dividers (P5, P6) as shown.
You will need
Step 4
Phillips Head
Screwdriver
8 x Dowels
(H1)
Page 6
fantasticfurniture.com.au
(P1)
(P3)
(P3)
(P2)
(P4)
(P4)
(P7)
(P7)
(P8)
(P6)
(P6)
(P5)
(P5)
H1
H2
H2
H2
H2
H2
H2
H2
H2
H1
H1
H1
H1
8 x Screws
(H2)
H2
Required
Two People

Step 6
Attach 4 x Legs (P11) into the Brackets (H16) turning clockwise until secure.
Repeat this process for the Middle Legs (P12 x 2).
Phillips Head
Screwdriver
You will need
Step 5
4 x Brackets
(H16)
2 x Brackets
(H17)
28 x Screws
(H15)
fantasticfurniture.com.au Page 7
(P11)
(P11)
(P11)
(P11)
(P12)
(P2)
(P2)
H15
H15
H15
H15
H15
H16
H16
H16
H16
H17
(P12)
H15 H15
H16
H15
H17
Attach 4 x Brackets (H16) and 2 x Brackets (H17) to Bottom Panel (P2) with 28 x Screws (H15)
as shown. Tighten with a Phillips Head Screwdriver.
H15
H17

Step 7
You will need
Attach 4 x Clips (H6) and 4 x Wheels (H7) to Doors (P9 & P10) with 32 x
Small Screws (H5). Tighten with a Phillips Head Screwdriver.
Hammer 4 x Plastic Glides (H9) to end of Legs (P11 x 4) as shown. Attach 2 x Adjusters (H8) to
end of Middle Legs (P12 x 2). With assistance, carefully turn the unit upright.
Phillips Head
Screwdriver
You will need
Step 8
Hammer
4 x Plastic
Glides (H9)
fantasticfurniture.com.au Page 8
32 x Small
Screws (H5)
(P12)
(P2)
(P12)
(P11)
(P11)
(P11)
(P11)
(P9)
(P10)
H8
H9
H9
H9
H9
H8
4 x Clips
(H6)
4 x Wheels
(H7)
2 x Adjusters
(H8)
Required
Two People
(P12)
H8
H5
H7
H5
H7
H5
H6
H5
H6
H5
H7
H5
H7
H5
H6
H5
H6
H5 H5
H7
H5 H5
H6

Step 9
You will need
Step 10
Phillips Head
Screwdriver
2 x Screws
(H13)
2 x Safety
Straps (H12)
2 x Washers
(H14)
8 x Wedges
(H10)
8 x Wedge
Screws (H11)
fantasticfurniture.com.au
Secure Back Panels (P7 x 2)
in place with 8 x Wedges (H10) using 8 x Wedge Screws (H11) by
tightening with the Phillips Head Screwdriver. Use 2 x Screws (H13)
and 2 x Washers (H14) to connect 2 x Safety Straps (H12) on Top Panel (P1).
(P1)
(P2)
(P9)
(P10)
(P1)
(P7)
(P7)
Page 9
H10
H11
H12
H13
H14
We strongly advise that
you use the wall safety
strap provided to prevent
the unittoppling.
Attach the Door (P10) to the unit by sliding down the button on the 2 x Clips (H6), ensuring
the 2 x Wheels (H7) slot into the bottom track, aligning the Clips (H6) to the track on bottom
of top panel. Once in place, push the button on the 2 x Clips (H6) back up to lock into place.
Repeat this step for the other Door (P9).
Sliding down first
Press to release
OK

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au Page 10
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
H14
Screw
Wall
With assistance, move the unit to its final positon. Attach the safety strap to the wall
ensuring it is firmly attached and secure.
Step 11
You will need
Phillips Head
Screwdriver
2 x Washers
(H14)
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
Twist the adjuster on
middle leg to make the
top panel is flush.
(P12)
Required
Two People