fantastic furniture Opus User manual

Version 1.0
Opus
Bookcase
fantasticfurniture.com.au

Secure it!
Wall attachment guide
or plasterboard
(with available wood stud)
Screw inserted directly into
stud.
ARNIN N UR TH A TRAP I ATTACH T
A I RI U IN UR R ATH.
included since dierent surface materials require dierent attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
• Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
• Avoid putting a on this product.
Reduce the risk of furniture
tip-over accidents
Page 2
or plasterboard
(without available wood stud)
Self drilling plasterboard
anchor.
or asonry wall
Screw
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
Recommended weight capacity: 10kg per Shelf

Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Git Card!
@fantasticfurniture
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au Page 4
Assembly checklist
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identiy and lay out all of the compenents
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Useful information
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a sot surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky itmes such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasterners. Check the product care label or website for
product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.

fantasticfurniture.com.au Page 5
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Mallet.
Parts list
Side Panel Let (P1);
Side Panel Right (P2);
Top Panel (P3);
4x Shelf Panels (P4);
Bottom Panel (P5);
5x Back Panels (P6)
Hardware pack
24 x Long Phillips
Screws
(H1)
24 x Wood
Dowels
(H2)
4 x Plastic
Leg Studs
(H3)
1 x Webbing
(H4)
1 x Pan Head
Screw
(H5)
24 x Stickers
(H6)
1 x Flat Washer
(H7)
Side
Panel Let
(P1)
Side
Panel Right
(P2)
Top Panel
(P3)
Shelf Panel
(P4)
Bottom Panel
(P5)
Back Panel
(P6)
Back Panel
(P6)
Back Panel
(P6)
Back Panel
(P6)
Back Panel
(P6)
Shelf Panel
(P4)
Shelf Panel
(P4)
Shelf Panel
(P4)

fantasticfurniture.com.au Page 6
Step 1
You will need
24 x Wood
Dowels
(H2)
Mallet
(H2)
(P5)
(P4)
x 4pcs
(P3)
Using a mallet, gently tap 24x Wood Dowels (H2) into pre-drilled holes in Top Panel (P3),
4x Shelf Panels (P4) and Bottom Panel (P5).
Step 2
(P5)
(H1)
(P3)
(P1)
(P4)
(P4)
(P4)
Attach Top Panel (P3), 4x Shelf Panels (P4) and Bottom Panel (P5) to the Side Panel
Let (P1) with 12x Long Phillips Screws (H1). Tighten with a phillips head screwdriver.
You will need
12 x Long
Phillips Screws
(H1)
Phillips Head
Screwdriver
(P4)
No Lamination

fantasticfurniture.com.au Page 7
Step 3
Slide 5x Back Panels (P6) into grooves of Top Panel (P3), 4x Shelf Panels (P4) and
Bottom Panel (P5).
Step 4
(P5)
(H1)
(P3)
(P1) (P4)
(P4)
(P4)



You will need
12 x Long
Phillips Screws
(H1)
Phillips Head
Screwdriver
(P4)
4 x Plastic
Leg Studs
(H3)
Mallet
(P5)
(P3)
(P1)
(P6)
(P4)
(P4)
(P4)
(P4)
(P6)
(P6)
(P6)
(P6)
(P2)

fantasticfurniture.com.au Page 8
Step 5
(P1)
Place 24x Stickers (H6) to cover screws.
(H6)
(P2)
Step 6
You will need
24 x Stickers
(H6)
You will need
Phillips head
screwdriver
1 x Webbing
(H4)
1 x Pan Head
Screw
(H5)
1 x Flat Washer
(H7)
Attach the Webbing (H4) to the unit using the Flat Washer (H7) and Pan Head Screw (H5).
We strongly advise that you secure the unit to a wall using the Webbing provided, to
prevent the unit from toppling.
(P3)
(H4)
(H7)
(H5)
30MM
(P6)
(P6)
(P6)
(P6)
(P6)

fantasticfurniture.com.au Page 9
Step 7
Step 8
Move furniture to its final position, then connect the end of the Webbing (H4) to the
wall, ensuring it is firmly attached. Seek advice from a qualified trades person on
how to attach this to your specific wall. Screws and wall plugs are not supplied.
Please use appropriate fixtures for your wall.
In the interest of our environment please dispose
of all packaging thoughfully.
Job complete!