fantastic furniture Niva Bedside 1 Drawer User manual

Version 1.0
Niva
Bedside 1 Drawer
fantasticfurniture.com.au
Required
Two People

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Page 2
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram
for you chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

Parts list
Box 1: Top Panel (P1); Bottom Panel (P2);
Left Side Panel (P3); Right Side Panel (P4);
Back Panel (P5); 2 x Long Rail (P6); 2 x Short Rail (P7);
4 x Leg (P8); Drawer Front (P9);
Drawer Left Side (P10);
Drawer Right Side (P11);
Drawer Base (P12); Drawer Back (P13);
Hardware Pack.
Top Panel
(P1)
What you need
to assemble the product
Othe tools you need
Flat head screwdriver; Phillips head
screwdriver; Mallet; Hammer
fantasticfurniture.com.au
Page 4
Hardware pack
28 x Cam Bolts
(H1)
24 x Big Cam
Nuts (H2)
20 x Dowels
(H3)
4 x Felt
Feet (H4)
4 x Small
Cam Nuts (H5)
12 x Screws
(H6)
#6x12 mm
4 x Screws
(H7)
#10x38 mm
4 x Screws
(H8)
#10x38 mm
1 x Left Runner
Track (H11)
1 x Left Runner
(H12)
1 x Right Runner
Track (H13)
1 x Right Runner
(H14)
Bottom Panel
(P2)
Left Side Panel
(P3)
Right Side
Panel (P4)
Back Panel
(P5)
Long Rail
(P6)
Short Rail
(P7)
Short Rail
(P7)
Long Rail
(P6)
Leg (P8)
Leg (P8)
Leg (P8)
Leg (P8)
Drawer Front
(P9)
Drawer Left
Side (P10)
Drawer Right
Side (P11)
Drawer Base
(P12)
Drawer Back
(P13)
12 x Nails
(H15)
#3x18 mm

Step 1
Page 5fantasticfurniture.com.au
You will need
8 x Cam bolts
(H1)
Screw 8 x cam bolts (H1) into bottom panel (P2) using a Phillips head screwdriver.
Step 2
Phillips head
screwdriver
You will need
12 x Dowels
(H3) Mallet
Insert 3 x dowels (H3) into each short rail (P7) as shown.
Insert 3 x dowels (H3) into each long rail (P6) as shown.
Use a mallet to gently tap the dowels into place if needed.
(P7)
(P6)
H3
H1
(P2)
H1
H1
H1 H1
H1
H1
H1
H3
H3
H3 H3
H3
H3
H3
H3
H3
H3
(P6)
(P7)

Step 3
Page 6fantasticfurniture.com.au
You will need
8 x Cam bolts
(H1)
Screw 2 x cam bolts (H1) into each leg (P8) using a Phillips head screwdriver.
Attach 1 x felt feet (H4) onto each leg (P8) as shown.
Step 4
Phillips head
screwdriver
You will need
4 x Big cam
nuts (H2)
Fit each short rail (P7) between 2 x legs (P8).
Insert 2 x big cam nuts (H2) each into short rail (P7).
Turn the big cam nuts (H2) clockwise to lock using a flat head screwdriver.
4 x Felt feet
(H4)
(P8)
H1
X4
Flat head
screwdriver
(P7)
H2
H1
H4
(P8)
(P8)
(P8)
(P8)
H2
H2
H2
(P7)

Step 5
Page 7fantasticfurniture.com.au
You will need
Position 2 x long rails (P6) between the assembled units as shown.
Insert 4 x big cam nuts (H2) into long rails (P6).
Turn the big cam nuts (H2) clockwise to lock using a flat head screwdriver.
Step 6
You will need
8 x Big cam
nuts (H2)
Position the leg assembly onto bottom panel (P2), making sure the cam bolts on
the bottom panel (P2) are inserted into the holes on the leg assembly.
Insert 8 x big cam nuts (H2) into short rails (P7) and long rails (P6).
Turn the big cam nuts (H2) clockwise to lock using a flat head screwdriver.
Carefully turn the unit over.
Flat head
screwdriver
Flat head
screwdriver
4 x Big cam
nuts (H2)
(P6)
(P8)
H2
(P2)
H2
(P6)
(P7)
H2 H2
(P8)
(P8)
(P8)
(P6)
H2 H2
H2
(P6)
(P7)

Step 7
Page 8fantasticfurniture.com.au
You will need
Screw 4 x cam bolts (H1) into bottom panel (P2) as shown,
tighten with a Phillips head screwdriver.
Fasten the legs (P8) through bottom panel (P2) with 4 x screws (H8) ,
using a Phillips head screwdriver as shown.
Step 8
You will need
8 x Dowels
(H3)
Mallet
4 x Screws
(H8)
4 x Cam bolts
(H1)
Phillips head
screwdriver
H3
(P2)
Insert 4 x dowels (H3) each into side panels (P3) and (P4).
Use a mallet to gently tap the dowels into place if needed.
H1
H8 H1
H1
H1
H8
H8
H8
H3
H3
H3
H3
H3
(P3)
(P4)
#10x38 mm

Step 9
Page 9fantasticfurniture.com.au
You will need
Attach 1 x left runner track (H11) to left side panel (P3) with 3 x screws (H6), using a Phillips
head screwdriver as shown.
Attach 1 x right runner track (H13) to right side panel (P4) with 3 x screws (H6),
using a Phillips head screwdriver as shown.
Step 10
You will need
Phillips head
screwdriver
Make sure the laminated edges of panels (P2), (P3) and (P4) are facing the same direction.
Position side panels (P3) & (P4) onto bottom panel (P2) as shown.
Insert 4 x big cam nuts (H2) into side panels (P3) & (P4).
Turn the big cam nuts (H2) clockwise to lock using a flat head screwdriver.
1 x Left runner
track (H11)
4 x Big cam
nuts (H2)
H6
(P3)
(P4)
(P3)
1 x Right runner
track (H13)
6 x Screws
(H6)
H13
H11
(P4)
H6
H6
H6 H6
H6
H6
H6
H6
H6
H6
H6
H11
H13
Laminated
edge
Flat head
screwdriver
H2 H2
H2
(P2)
Laminated
edge
#6x12 mm

Step 11
Page 10fantasticfurniture.com.au
You will need
Screw 4 x cam bolts (H1) into top panel (P1) using a Phillips head screwdriver.
Step 12
You will need
Phillips head
screwdriver
Position top panel (P1) onto side panels (P3) & (P4) as shown.
Insert 4 x big cam nuts (H2) into side panels (P3) & (P4).
Turn the big cam nuts (H2) clockwise to lock using a flat head screwdriver.
4 x Cam bolts
(H11)
4 x Big cam
nuts (H2)
Flat head
screwdriver
H1
(P1)
H1
H1
H1