fantastic furniture Toulon Double User manual

Toulon
fantasticfurniture.com.au
Version 1.0
Double

We’re thrilled you’ve chosen Fantastic Furniture
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au Page 2
to help create a home you’ll love!
Look like you’ve found
your Fantastic!

Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
! Never use power tools unless specifically instructed.They can damage your components or
hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
!If you are having any diculties assembling your product,missing any hardware or
components please visit our website Help
Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
fantasticfurniture.com.au Page 3
Assembly checklist
Useful Information

Hardware pack
Page 4
26 x Slats
(P15)
26 x Plastic Slat Caps
(P13)
13 x Center Plastic
Slat Caps
(P14)
What you need
to assemble the product
Please make sure you have all these parts before you start.
fantasticfurniture.com.au
Part List:
Box 1:
2 x Headboard Legs (P1&P2)
2 x Footboard Legs (P11&P12)
3 x Strong Connect Bar (P3)
2 x Wide Connect Bar (P4)
2 x Long Canopy Bar (P6)
2 x Short Canopy Bar (P7)
2 x Side Rails (P5)
1 x Center Rail (P8);
2 x Cross Bar (P9);
3 x Support Legs (P10);
Box 2:
26 x Slats (P13);
13 x Centre Plastic
Slat Caps (P14)
24 x Metal
Washer
(H7)
20 x Thin
Short Bolts
M6 x 14mm
(H4)
4 Thin
Long Bolts
M6 x 55mm
(H2)
14 Big Bolts
M8 x 45mm
(H1)
2 x Small
Allen Key
( H10 )
8 x Thin Bolts
M6 x 25mm
(H5)
10 x Hex Nuts
(H8)
1 x
Spanner
( H9 )
6 Thin
Short Bolts
M6 x 40mm
(H3)
8 x Metal Cap
M6 x 18mm
(H6)
1 x Large
Allen Key
( H11 )
(P3)
(P3) (P3)
2x Wide Connect Bar
(P4)
(P4)
(P9)
(P8)
(P9)
(P4) (P5)
(P10)
(P10)
(P10)
(P12)
(P11)
2x Side Rails
(P5)
1x Center Rail
(P8)
3x Support Legs
(P10)
2x Cross Bar
(P9)
2x Long Canopy Bar
(P6)
(P6)
(P6)
1x Headboard Leg
(P1)
(P7)
(P7)
(P2)
(P1)
2x Short Canopy Bar
(P7)
1x Footboard Leg
(P11)
1x Headboard Leg
(P2)
1x Footboard Leg
(P12)
3x Strong Connect Bar
(P3)

Step 2
Page 5
Step 1
You will need
fantasticfurniture.com.au
H4
H4
H10
H10
H11
H11
H11
H1
H1
H1
You will need
14 X Big Bolts
M8 x 45mm
(H1)
Attach Long Canopy Bar (2 x P6) using 8 x Thin Short Bolts (H4),
Tighten with a Small Allen Key (H10).
1 x Large
Allen Key
(H11)
8 x Thin
Short Bolts
M6 x 14mm
(H4)
1 x Small
Allen Key
(H10)
1 x Small
Allen Key
( H10 )
8 x Thin
Short Bolts
M6 x 14mm
(H4)
(P7) (P7)
(P2)
(P1)
(P3)
(P3)
(P4)
Attach short Canopy Bar (P7)
to Headboard Leg (P1 & P2) with
4 xThin Short Bolts (H4), Tighten
with Small Allen Key (H10);
Repeat this step with (P11&P12);
(P11)
(P12)
(P4)
(P3)
(P6)
(P6)
Attach 2 x Connect Bar (P3) and 1 x Wide Connect Bar (P4) to Headboard Leg (P1&P2) by
using 8 x Big Bolts (H1) tighten with Large Allen Key (H11). Attach 1 x Connect Bar (P3) and
1 x Wide Connect Bar (P4) to Footboard Leg (P11&P12) by using 6 x Big Bolts (H1), tighten
with a Large Allen Key (H11).

Step 4
Page 6fantasticfurniture.com.au
Step 3
H10
H7
H8
H9
H2
You will need
You will need
8 x Thin Bolts
M6 x 25mm
( H5 )
2 x Small
Allen Key
( H10 )
1 x Small
Allen Key
( H10 )
8 x Metal
Washer
( H7 )
4 x Metal
Washer
( H7 )
8 x Metal Cap
M6 x 18mm
( H6 )
4 x Hex Nuts
(H8)
1 x
Spanner
( H9 )
(P5)
(P5)
(P5)
(P5)
H10
H5
H7
H6
H6
H10
4 x Thin
Long Bolts
M6 x 55mm
(H2)
(P9)
(P9)
Attach 2 x Side Rails (P5) to Headboard Leg (P1&P2) and Footboard Leg (P11&P12) with 8 x Metal
Washer (H7), 8 x Thin Bolts (H5) and 8 x Metal Cap (H6) using 2 x Small Allen Key (H10) at the same
time . Do not fully tighten.
(P2)
(P1)
(P11)
(P12)
Attach the Cross Bar (P9) onto the 2 x Side Rails (P5) using 4 x Thin Long Bolts (H2) and
4 x Hex Nuts (H8).
Tighten with the Small Allen Key (H10) and Spanner (H9) as shown.
70%

Step 6
Page 7fantasticfurniture.com.au
Step 5
You will need
You will need
H4
H4
H10
Attach the Center Rail (P8) under the Crossbar (P9) using 4 x Thin Short Bolts (H4),
Tighten with a small Allen Key (H10).
Attach 3 x Support Legs (P10) under the Centre Rail (P8) using 12 x Metal Washer (H7),
6xThin Short Bolts (H3) and 6 x Hex Nuts (H8). Tighten with a Small Allen Key (H10) and
a Spanner (H9).
4 x Thin
Short Bolts
M6 x 14mm
(H4)
1 x Small
Allen Key
( H10 )
6 x Hex Nuts
(H8)
(P9)
(P8)
(P9)
(P9)
(P8)
(P8)
(P8)
(P10)
(P10)
(P10)
(P10)
12 x Metal
Washer
( H7 )
1 x Small
Allen Key
( H10 )
6 x Thin
Short Bolts
M6 x 40mm
(H3)
1 x
Spanner
( H9 )
H10
H3
HI
G
H7

13 x Center Plastic
Slat Caps
(P14)
You will need:
26 x Plastic Slat Caps
(P13)
IMPORTANT: Fully tighten all bolts on bed. Periodically check to ensure all bolts remain tight.
In the interest of our environment please dispose of all packaging thoughtfully.
Step 7
Step 8
Job Complete!
fantasticfurniture.com.au Page 8
Push 2 x Slat Caps (P13), 2 Slats (P15) and 1 x Centre
Plastic Slat Caps (P14) together. Lower the fully assembled slat
into side rails (P5). Ensure the connectors are in place over the
side rail holes and apply down ward pressure on the slat with
the end connectors until the end plastic cap is fully inserted into the rail.
Repeat for all 13 Slats.
(P13)
(P13)
(P14)
(P15)
(P15)
(P5)
(P5)
(P8)