fantastic furniture Tailor Utility 6 Drawer User manual

Version 1.0
Tailor
Utility 6 Drawer
fantasticfurniture.com.au

Secure it!
Wall attachment guide
(with available wood stud)
Screw directly into
stud.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
• Do not
•
•
Reduce the risk of furniture
tip-over accidents
(with available wood stud)
S
.
Screw
fantasticfurniture.com.aufantasticfurniture.com.au
Recommended Weight Capacity :15kg/shelf

fantasticfurniture.com.au Page 3
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 4
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer; Tape
DO NOT USE
Page 5
fantasticfurniture.com.au
Right Side
Panel
(P3)
Left Side
Panel
(P2)
Back Panel
(P4)
Top/Bottom Panel
(P1)
Top/Bottom Panel
(P1)
x4 x2
Small Left
Drawer Side
(P6)
Small
Drawer Front
(P5)
Small
Right Drawer
Side
(P7)
Small
Drawer Back
(P9)
Drawer Base
(P8)
Left
Drawer Side
(P11) Drawer Front
(P10)
Right Drawer
Side
(P12)
Drawer Back
(P13)
Drawer Base
(P8)
Parts list
2 x Top/Bottom Panels (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Back Panel (P4);
Small Drawer Front (P5);
Small Left Drawer Side (P6);
Small Right Drawer Side (P7);
Drawer Base (P8);
Small Drawer Back (P9);
Drawer Front (P10);
Left Drawer Side (P11);
Right Drawer Side (P12);
Drawer Back (P13);
8 x Cam
Bolts
(H3)
8 x Cam
Nuts
(H4)
8 x Dowels
(H1)
24 x Nails
(H5)
24 x Long
Screws
(H2)
1 x Screw
(H7)
1 x Safety
Strap
(H6)
2 x Washer
(H8)
6 x CL Runner
Tracks
(H9)
6 x CR Runner
Tracks
(H10)
6x DL Runners
(H11)
6 x DR Runners
(H12)
24 x Small
Screws
(H13)
26 x Screws
(H14)
24 x Small
Cam Bolts
(H15)
24 x Small
Cam Nuts
(H16)
1 x Metal
Bracket
(H17)

You will need
Step 1
Page 6
fantasticfurniture.com.au
(P3)
(P2)
Attach 6 x CL Runner Tracks (H9) to Left Side Panel (P2) with 12 x Screws (H14).
Attach 6 x CR Runner Tracks (H10) to Right Side Panel (P3) with 12 x Screws (H14).
H9
H9
H9
H10
H10
H10
H10
H10
H10
H9
H9
H9
31
26
21
16
9
21
31
26
21
16
9
21
CR
H10 H10
CR
H14
H14
H9
H14
glide on bottom
CL CL
H9
H14
You will need
Step 2
6 x CL Runner
Tracks (H9)
24 x Screws
(H14)
Phillips head
screwdriver
6 x CR Runner
Tracks (H10)
(P2)
(P3)
H3
H3
H3
H3
H3
H3
H3
H3
8 x Cam Bolts
(H3)
Phillips head
screwdriver
Attach 8 x Cam Bolts (H3) into Side Panels (P2, P3).

You will need
Step 3
You will need
Step 4
Page 7
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Phillips Head
Screwdriver
Phillips head
screwdriver
(P3)
H4
H4
H4
(P1)
(P1)
Make sure raw edge
is facing up.
H1
H1
H1
4 x Cam Nuts
(H4)
4 x Dowels
(H1)
Insert 4 x Dowels (H1) into 2 x Top/Bottom Panels (P1).
Insert 4 x Cam Nuts (H4) into the holes of 2 x Top/Bottom Panels (P1).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach 2 x Top/Bottom Panels (P1) to Right Side Panel (P3), then tighten the cam nuts.
H4
H1
H4
H4
H4
H1
H1
H1
(P3)
(P1)
(P1) (P2)
Insert 4 x Dowels (H1) into 2 x Top/Bottom Panels (P1).
Insert 4 x Cam Nuts (H4) into the holes of 2 x Top/Bottom Panels (P1).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Left Side Panel (P2) into place and tighten the cam nuts.
4 x Cam Nuts
(H4)
4 x Dowels
(H1)

You will need
Step 5
You will need
Step 6
Page 8
fantasticfurniture.com.au
(P4)
(P2)
(P3)
Make sure the edge of back panel is well
aligned with side, top and bottom panels
before nailing the back panel.
Attach Back Panel (P4) to the cabinet with 24 x Nails (H5) using hammer.
H5
H14 H17
(P3)
(P2)
Attach Metal Bracket (H17) to Side Panels (P2, P3) with 2 x Screws (H14).
2 x Screws
(H14)
1 x Metal
Bracket (H17)
Phillips head
screwdriver
24 x Nails
(H5) Hammer
Tape
A = B
AB
Ensure the diagonal of section A
is equal to the section B.

You will need
Step 7
You will need
Step 8
Page 9
fantasticfurniture.com.au
Phillips head
screwdriver
Phillips head
screwdriver
4 x Small Cam
Bolts (H15)
4 x Small Cam
Nuts (H16)
Step 9
H15
H15
(P5)
H15 H15
Attach 4 x Small Cam Bolts (H15) into Small Drawer Front (P5).
H16
H16
(P5)
(P6)
(P7)
H16
H16
Insert 4 x Small Cam Nuts (H16) into the holes of Small Drawer Sides (P6, P7).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Small Drawer Sides (P6, P7) into place and tighten the cam nuts.
(P5)
(P8)
(P6)
(P7)
Slide Drawer Base (P8) into the groove
in Small Drawer Sides (P6, P7).

You will need
Step 10
You will need
Step 11
Page 10
fantasticfurniture.com.au
Phillips head
screwdriver
Step 12
4 x Long
Screws (H2)
4 x Small
Screws (H13)
1 x DL Runner
(H11)
1 x DR Runner
(H12)
Phillips head
screwdriver
H2
(P8)
(P9)
(P5)
(P6)
(P7)
H2
H2
H2
Attach Small Drawer Back (P9) to Small Drawer Sides (P6, P7) with 4 x Long Screws (H2),
make sure that the groove lines up the whole way around the drawer.
H12
DR
H13 H13
H11 DL
H13 H13
(P6)
(P7)
H12
H11
H13
H13
H13
H13
Attach 1 x DL Runner (H11) to the bottom of Small Left Drawer Side (P6) and 1 x DR Runner (H12)
to the bottom of Small Right Drawer Side (P7) with 4 x Small Screws (H13).
Repeat step 7 to step 11 to assemble the rest of 3 x Small Drawers.

You will need
Step 13
You will need
Step 14
Page 11
fantasticfurniture.com.au
Step 15
H15H15
(P10)
H15 H15
Attach 4 x Small Cam Bolts (H15) into Drawer Front (P10).
H16
H16
H16
H16
(P10)
(P11)
(P12)
Insert 4 x Small Cam Nuts (H16) into the holes of Drawer Sides (P11, P12).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Drawer Sides (P11, P12) into place and tighten the cam nuts.
Phillips head
screwdriver
Phillips head
screwdriver
4 x Small Cam
Bolts (H15)
4 x Small Cam
Nuts (H16)
(P10)
(P8)
(P11)
(P12)
Slide Drawer Base (P8) into the groove
in Drawer Sides (P11, P12).

You will need
Step 16
You will need
Step 17
Page 12
fantasticfurniture.com.au
Phillips head
screwdriver
Step 18
H2
(P8)
(P13)
(P10)
(P11)
(P12)
H2
H2
H2
Attach Drawer Back (P13) to Drawer Sides (P11, P12) with 4 x Long Screws (H2),
make sure that the groove lines up the whole way around the drawer.
4 x Long
Screws (H2)
4 x Small
Screws (H13)
1 x DL Runner
(H11)
1 x DR Runner
(H12)
H12
DR
H13 H13
H11 DL
H13 H13
Phillips head
screwdriver
(P11)
(P12)
H12
H11
H13
H13
H13
H13
Attach 1 x DL Runner (H11) to the bottom of Left Drawer Side (P11) and 1 x DR Runner (H12)
to the bottom of Right Drawer Side (P12) with 4 x Small Screws (H13).
Repeat step 13 to step 17 to assemble the rest of Drawer.

Step 19
Page 13
fantasticfurniture.com.au
Step 20
We strongly advise that you use
the wall safety strap provided to
prevent the unit toppling
H6
H8
H7
You will need
Phillips head
screwdriver
1 x Safety
Strap (H6)
1 x Screw
(H7)
1 x Washer
(H8)
Put the drawers into the cabinet.
(P4)
Use Screw (H7) and Washer (H8) to connect Safety Strap (H6)
on Top Panel (P1) through the gap of Back Panel (P4).

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
Step 21
Page 14
fantasticfurniture.com.au
H8
wall
Screw
You will need
Phillips head
screwdriver
1 x Washer
(H8)
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
Move the cabinet to the final position. Attach the safety strap to the wall.
Make sure it is firmly attached and make sure it is a snug fit.
Screw and Wall Plug are not
provided. Please use
appropriate fixtures for
your wall.