fantastic furniture VERONA User manual

Verona
Bookcase 5 Shelf White

Recommended weight capacity: 35kgs/shelf

Page 3

Page 4

Hardware Pack
Box 1:
2 x Side Panel (P1);
4 x Shelf (P2);
1 x Top Shelf(P3);
1 x Bottom Shelf(P4);
5 x Back Panel(P5);
4 x Feet(P6)
(P1)
(P1)
(P2)
(P2)
(P2)
(P2)
(P3)
(P4)
(P5)
(P5)
(P5)
(P5)
(P5)
(P6)
(P6)
(P6)
(P6)
1 x Allen Key
(H6)
24 x Cam Nuts
(H2)
24 x Dowels
(H3)
4 x Washers
(H4)
4 x Bolts
(H5)
20 x Wedges
(H7)
4 x Felt Protectors
(H10)
24 x Cam Bolts
(H1)
20 x Wedge Screws
(H8)
1 x Screw
(H11)
Wall Strap
1 x Wall Strap
(H12)
24 x Adhesive Screw
Covers(H9)
2 x Washers
(H13)
Page 5
Parts list

16 x Dowels
(H3)
16x Cam Bolts
(H1)
Phillips Head
Screwdriver
(H1)
(H1)
(H3)
(H3)
(H1)
(H1)
(H3)
(H3)
(H1) (H1)
(H1) (H1)
(H3)(H3)
(H3)(H3)
(P1)x2
Insert 8 x Dowels (H3) into Side Panel (P1) and secure 8 x Cam Bolts (H1) to Side Panel (P1)
by tightening with the Phillips Head Screwdriver.
Repeat steps for second Side Panel (P1).
Insert 8 x Cam Nuts (H2) into Shelves (P2x4) as shown. Rotate the cam nuts so the
arrows point towards the incoming cam bolts. Attach Shelves (P2x4) to Side Panel (P1)
by tightening the cam bolts with the Phillips Head Screwdriver
(P1)
(P2)
(H2)
(H2)
(P2)
(H2)
(H2)
(P2)
(H2)
(H2)
(P2)
(H2)
(H2)
8 x Cam Nuts
(H2)
Phillips Head
Screwdriver
Page 6

Slide 3 x Back Panels (P5) into the grooves of Shelves (P2x4) and Side Panel (P1) as shown.
Ensure the High - gloss surface of Shelves are facing inside.
(P1)
(P2) (P2)(P2) (P2)
(P5) (P5)(P5)
(P1)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
8 x Cam Nuts
(H2)
Insert 8 x Cam Nuts (H2) into Shelves (P2x4) as shown. Rotate the cam nuts so the arrows
point towards the incoming cam bolts. Attach Shelves (P2x4) to Side Panel (P1) by
tighteningthe cam bolts with the Phillips Head Screwdriver
(P2)(P2)(P2)(P2)
Phillips Head
Screwdriver
Page 7

(P1)
(P5) (P5)
(P1)
(P2) (P2)
Slide 2 x Back Panels (P5) into the grooves of Side Panels (P1x2) and Shelves (P2x2)
as shown. Ensure the High - gloss surface of Shelves are facing inside.
(P3)
8 x Cam Bolts
(H1)
8 x Dowels
(H3)
(H1) (H3)
(H1) (H3)
(H1) (H3)
(H1) (H3)
Phillips Head
Screwdriver
(P4)
(H1) (H3)
(H1) (H3)
(H1) (H3)
(H1) (H3)
Insert 4 x Dowels (H3) into Top Panel (P3) and secure 4 x Cam Bolts (H1) to Top Panel (P3)
by tightening with the Phillips Head Screwdriver.Repeat steps for Bottom Panel (P4)
Page 8

9
7
8
(P3) (P4)
8 x Cam Nuts
(H2)
Insert 8 x Cam Nuts (H3) into Side Panels (P1x2) as shown. Rotate the cam nuts so the
arrows point towards the incoming cam bolts. Attach Top & Bottom Panels (P3&P4) to
Side Panels (P1x2) by tightening the cam bolts with the Phillips Head Screwdriver.
Ensure the Bottom Panel is at the end of the bookcase with holes on the underside
of the Shelves.
Top Bottom
Phillips Head
Screwdriver
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(P1)
(P1)
4 x Washers
(H4)
4 x Bolts
(H5)
1 x Allen Key
(H6)
Attach Feet (P6x4) to Bottom Panel (P4) with 4 x Washers (H4) and 4 x Bolts (H5) by
tightening with the Allen Key (H6) as shown
(P6)
(P6) (H4)
(H4) (H5)
(H5) (H6)
(P6)
(P6) (H4)
(H4) (H5)
(H5)
(P6) (H4) (H5) (H6)
(P4)

10
9
10
4 x Felt Protectors
(H10)
(H10)
(H10)
(H10)
(H10)
Peel the backing off 4 x Felt Protectors (H10) so that the adhesive side is exposed.
Apply 4 x Felt Protectors (H10) to the bottom of Feet (P6x4).
(P6)
(P6)
(P6)
(P6)
(H10)
(P6)
Insert 20 x Wedges (H7) into all corners of the back of the assembled unit as shown.
Secure Wedges (H7) by tightening 20 x Wedge Screws (H8) with the Phillips
Head Screwdriver
20 x Wedges
(H7)
20 x Wedge Screws
(H8)
(H7)
(H8)
Phillips Head
Screwdriver