fantastic furniture CODA INSERT 1 DOOR STANDARD User manual

Version 1.1
CODA
INSERT 1 DOOR STANDARD
www.fantasticfurniture.com.au

Enjoy
Your purchase from
Australia’s Best Value Furniture Store
www.fantasticfurniture.com.au PAGE 2

Assembly checklist
Useful Information
www.fantasticfurniture.com.au PAGE 3
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.

What you need
to assemble the product
Parts list
Box 1: Side Panel (P1);
Door (P2);
Back Panel (P3);
Bottom Panel (P4);
www.fantasticfurniture.com.au PAGE 4
6 x Dowels
(H1) 2 x Cam Bolts (H3) 2 x Cam Nuts
(H4)
Side Panel
(P1)
Back Panel
(P3)
Bottom Panel
(P4) Door
(P2)
Hardware Pack
Additional Tools Required
Flat head screwdriver;
Phillips head screwdriver;
DO NOT USE
4 x Long
Screws (L30mm)
(H2)
12 x Timber
Screws
(H6)
1 x Rubber
Sticker
(H7)
2 x Hinges
(H5)
4 x Covers
(H9)
1 x Medium
Screw (L20mm)
(H8)

You will need
Step 1
You will need
Step 2
www.fantasticfurniture.com.au PAGE 5
H3
H3
2 x Cam Nuts
(H4)
Flat head
screwdriver
2 x
Dowels
(H1)
2 x Cam Bolts
(H3) Phillips head screwdriver
(P4)
(P3)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P3)
H4
H1
H1
H4
Attach 2 x Cam Bolts (H3) into Back Panel (P3) using a Phillips head screwdriver.
Insert 2 x Dowels (H1) into the holes of Back Panel (P3) as shown.
Insert
2 x Cam Nuts (H4) into the holes of Bottom Panel (P4).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach
Bottom Panel (P4) to Back Panel (P3) ,
then tighten the cam nuts using a Flat head screwdriver.

www.fantasticfurniture.com.au PAGE 6
H2
H5
H5
H6 H6
H6H6
You will need
Step 3
4 x Dowels
(H1)
You will need
Step 4
Phillips head
screwdriver
Phillips head
screwdriver
(P4)
(P2)
(P3) (P1)
4 x Long
Screws (H2)
4 x Timber
Screws (H6)
2 x Hinges
(H5)
H2
H2
H2
H1
H1
H1
H1
Insert 4 x Dowels (H1) into the holes of Back Panel (P3) and Bottom Panel (P4) as shown.
Attach Side Panel (P1) to Back Panel (P3) and Bottom Panel (P4) with 4 x Long Screws (H2),
Tighten the screws using a Phillips head screwdriver.
Attach 2 x Hinges (H5) to Door (P2) with 4 x Timber Screws (H6).
Tighten Screws using a Phillips head screwdriver.

H6
H6
www.fantasticfurniture.com.au PAGE 7
(P4)
(P2)
(P1)
1 x Rubber
Sticker (H7)
H7
You will need
Step 5
Phillips head
screwdriver
8 x Timber
Screws (H6)
H6
H6
Attach Door (P2) to Side Panel (P1) with 8 x Timber Screws (H6) using a Phillips head screwdriver.
Stick 1 x Rubber Sticker (H7) to Bottom Panel (P4) as shown.
H6
H6

www.fantasticfurniture.com.au PAGE 8
Step 6
Put the insert cabinet into the bookcase,
make sure the door of insert cabinet is flush with the edge of shelf.

www.fantasticfurniture.com.au PAGE 9
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
Recommended weight capacity: 5KG.
You will need
Step 7
H8 H9
Open the door carefully.
Attach the cabinet to the bookcase with 1 x Medium Screw (H8) using a Phillips head screwdriver.
If you'd like to adjust the insert cabinet or remove it, please seal the holes with the Covers (H9).
Phillips head
screwdriver
4 x Covers
(H9)
1 x Medium
Screw (H8)

www.fantasticfurniture.com.au PAGE 10
TO ADJUST YOUR DOORS TO MAKE THE GAPS MORE EVEN (OPTIONAL).
STEP 1
STEP 1
STEP 3
STEP 2a MOVE DOOR IN
STEP 3a MOVE DOOR RIGHT STEP 3b MOVE DOOR LEFT
STEP 2b MOVE DOOR OUT
Side panel
Door
Open the door
Adjust the door move in or out
a little
To adjust the gap between
door and side panel
Loosen the screw indicated a little,
adjust the hinge to right position
(see step 2a & Step 2b),
then tighten the screw.
Loosen or tighten the screw
indicated a little to adjust the
gap between door and side
Panel (see step 3a & Step 3b)
Push the hinge back a little.
Turn the screw clockwise a little as
shown to move door right.
Turn the screw counterclockwise
a little as shown to move door left.
Pull the hinge forward a little.
Side panel
Door
too big gap
Side panel
Side panel
Door
Door
too Small gap
Side panel
Side panel
Door
Door
Side panel
Side panel
Door
Door
projective line of
side panel
The door should
move right a little
Side panel
Side panel
Door
Door
projective line of
side panel
The door should
move left a little
Side panel
Door