fantastic furniture Nicholls Lamp Table Black Ash User manual

Version 1.0
Nicholls
Lamp Table Black Ash
fantasticfurniture.com.au

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Page 2
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram
for your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au
Page 4
What you need
to assemble the product
Part list
1 x Top Panel (P1)
2 x Leg Frames (P2)
1 x Shelf (P3)
2 x Top Rails (P4)
4 x Support Rails (P5)
Top Panel (P1)
Hardware pack
20 x Bolts 12mm
(H1)
4 x Screws 14mm
(H2)
4 x Bolts 50mm
(H4)
4 x Flat Washers
(H5)
1 x Allen Key
(H6)
Othe tools you need
Phillips Head Screwdriver
Leg Frame
(P2)
Leg Frame
(P2)
Shelf (P3)
Top Rail (P4)
Top Rail
(P4)
Support Rail
(P5)
Support Rail (P5)
4 x Brackets
(H3)

Step 1
Page 5fantasticfurniture.com.au
You will need
8 x Bolts
12mm (H1)
Fit 2 x top rails (P4) between the 2 x leg frames (P2).
Make sure the bolt holes on leg frames (P2) and top rails (P4) are aligned.
Fasten with 8 x bolts (H1) as shown, using allen key (H6).
1 x Allen Key
(H6)
(P2)
(P2)
(P4)
(P4)
H1
H1
H1
H1
(P2)
(P4)
Step 2
You will need
4 x Bolts
50mm (H4)
1 x Allen Key
(H6)
4 x Flat
Washers (H5)
(P4)
(P1)
(P1)
(P4)
(P4)
H4
H6
H5
Position the assembled frame onto top panel (P1).
Fix the assembled frame to top panel (P1) with 4 x bolts (H4) and 4 x flat washers (H5)
with allen key (H6).
Align all bolts well before fully tightening.

Step 3
Page 6fantasticfurniture.com.au
You will need
4 x Bolts
12mm (H1)
Attach 4 x brackets (H3) to leg frames (P2) with 4 x bolts (H1), using allen key (H6).
1 x Allen Key
(H6)
(P2)
Step 4
You will need
4 x Screws
14mm (H2)
Position shelf (P3) in place.
Attach the shelf (P3) using 4 x screws (H2) with a phillips head screwdriver.
4 x Brackets
(H3)
(P2)
H3 H1
(P2)
Phillips Head
Screwdriver
(P3)
H2
H2
H2
H2
Round hole

Step 5
Page 7fantasticfurniture.com.au
You will need
8 x Bolts
12mm (H1)
Attach each support rail (P5) onto leg frame (P2) and top rail (P4) with 2 x bolts (H1),
using allen key (H6). Carefully turn the table over.
1 x Allen Key
(H6)
Step 6
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
H1
H1
H1
H1
H1
H1
(P2)
(P2)
(P5)
(P4)
(P4)
(P5)
(P5)
(P4)
(P5)
(P5)
H1
H1
Round hole
(P2)