fantastic furniture Retro User manual

Bed Double
fantasticfurniture.com.au
Required
Two People
Version 1.0
Retro

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Page 2
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram
for you chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au
Page 4
What you need
to assemble the product
Othe tools you need
Phillips head screwdriver; Mallet
Headboard (P1)
Part list
Carton 1:
1 x Footboard (P2)
1 x Side Rail (P3)
1 x Side Rail (P4)
1 x Centre Rail (P5)
3 x Support Legs (P6)
4 x Legs (P7)
4 x Brackets (P8)
Carton 2:
1 x Headboard (P1)
1 x Set of Slats (P9)
Footboard
(P2)
Side Rail
(P3)
Side Rail
(P4)
Centre Rail
(P5)
Support Leg
(P6)
(P6)
(P6)
Leg (P7)
Leg (P7)
Leg (P7)
Leg
(P7)
Bracket
(P8)
(P8)
(P8)
(P8)
Slats (P9)

fantasticfurniture.com.au
Page 5
Hardware Pack
6 x Bolts
(H1)
M6x40 mm
52 x Small Bolts
(H2)
M6x16 mm
8 x Dowels
(H3)
4 x Felt Feet
(H4)
8 x Big Bolt
(H5)
Ø8x80 mm
1 x Wrench
(H6)
8 x Half Moon
Washers (H7)
8 x Spring
Washers (H8)
8 x Nuts
(H9)
1 x Allen Key
(H10)
28 x Screws
(H11)
#8x25 mm
6 x Flat Washers
(H12)
1 x Small Wrench
(H13)
6 x Small Spring
Washers (H14)
6 x Small Nuts
(H15)

Step 1
Page 6fantasticfurniture.com.au
You will need
6 x Bolts
(H1)
Attach each support leg (P6) onto centre rail (P5) with 2 x bolts (H1),
2 x small spring washers (H14), 2 x flat washers (H12) and 2 x small nuts (H15) as shown,
then tighten with allen key (H10) and small wrench (H13).
1 x Allen key
(H10)
6 x Flat
washers (H12)
1 x Small
wrench (H13)
(P5)
6 x Small spring
washers (H14)
6 x Small nuts
(H15)
(P6)
(P6)
(P6)
(P6)
(P5)
H1
H10
H13
H15
H14
H12
M6x40 mm

Step 2
Page 7fantasticfurniture.com.au
You will need
8 x Dowels
(H3)
Insert 4 x dowels (H3) into side rails (P3) & (P4).
Use a mallet to gently tap the dowels into place if needed.
Mallet
H3
(P3)
(P4)
H3
H3
H3

Step 3
Page 8fantasticfurniture.com.au
You will need
8 x Big bolts
(H5)
Screw 4 x big bolts (H5) into headboard (P1) as shown.
Screw 4 x big bolts (H5) into footboard (P2) as shown.
(P1)
H5
H5
H5
H5
(P2)
Ø8x80 mm

Step 4
Page 9fantasticfurniture.com.au
You will need
4 x Half moon
washers (H7)
Attach side rails (P3) & (P4) onto headboard (P1) using 2 x half moon washers (H7),
2 x spring washers (H8) and 2 x nuts (H9), using wrench (H6) tighten nuts (H9) as shown.
4 x Spring
washers (H8)
4 x Nuts
(H9)
1 x Wrench
(H6)
(P1)
Required
Two People
(P3)
(P4)
(P1)
(P4)
H6
H7
H8H9
Ensure arrow points
towards Headboard (P1)

Step 5
Page 10fantasticfurniture.com.au
You will need
4 x Half moon
washers (H7)
Attach side rails (P3) & (P4) onto footboard (P2) using 2 x half moon washers (H7),
2 x spring washers (H8) and 2 x nuts (H9), using wrench (H6) tighten nuts (H9) as shown.
4 x Spring
washers (H8)
4 x Nuts
(H9)
1 x wrench
(H6)
H6
Required
Two People
H7
H8 H9
(P2) (P3)
(P4)
(P2)
(P3)
these holes at the bottom
these holes at the bottom