fantastic furniture Sonoma Clothes Rack Large User manual

fantasticfurniture.com.au
Sonoma
Clothes Rack Large
Version 1.0

Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love
fantasticfurniture.com.au
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurni ture
Weight Limit: 20kgs per shelf
Warning: Ensure the wall strap is
attached to avoid serious injury.
To avoid any serious of fatal injury, a wall strap has been provided with
this product to prevent topping. We strongly recommend that this
product is permanently fixed to the wall or other suitable surface. Fixing
of what fixing device to use.

fantasticfurniture.com.au Page 3
Read through the instructions
carefully before you begin.
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screwsuntil the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a so t surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
components please visit our website Help Centre for further assistance.
Assembly Checklist
!Please see page 2for any safety requirements or weight restrictions.
Useful information

Page 4
fantasticfurniture.com.au
What You Need
to assemble the product
Hardware Pack :
(H2) (H3) (H4)
11 x Screws 49 x Screws 2 x Nuts ( H5)
Feet
(H1)
2 x Wall Straps
2 x Wall Strap
Screws 4 x Washers
(H6)
(H7) (H8)
Top Left Frame
Lower Left Frame
(P1)
(P2)
(P2)
(P3)
(P4)
(P4)
(P5)
(P6)
(P7)
(P9)
(P10)
(P11)
(P12)
(P7)
(P7)
(P8)
(P8)
Box 1:
Large Top Panel
Small Top Panel
(P7)
Hanging Rail
Small Shelf Panel
(P4)
(P4)
(P4)
Top Right Frame
Lower Right Frame
Lower Middle Frame
Top Middle Frame
6 x Adjustable
Other tools you need
Phillips Head Screwdriver
Back Support
1 x Allen Key
Large Top Panel (P1)
2 x Large Shelf Panels (P2)
Small Top Panel (P3)
5 x Small Shelf Panels (P4)
Top Left Frame (P5)
Lower Left Frame (P6)
Top Middle Frame (P11)
Lower Middle Frame (P12)
Top Right Frame (P9)
Lower Right Frame (P10)
4 x Back Supports (P7)
2 x Hanging Rails (P8)
Large Shelf Panel
Small Shelf Panel
Small Shelf Panel
Small Shelf Panel
Small Shelf Panel
Back Support
Back Support
Back Support
Hanging Rail
1 x Wrench
(H9)
Large Shelf Panel

Page 5
fantasticfurniture.com.au
Step 1
Step 2
You will need
You will need
(H1)
(H3)
4 x Screws
(H5)
(P5)
(P6)
(P5)
(P6)
(P5)
(P6)
(P9)
(P10)
(P9)
(P10)
(H1)
(H3)
2 x Screws
(H5)
(P9)
(P10)
(P11)
(P12)
(P11)
(P12)
(P12)
(P11)
(H3)
(H5)
(H3)
(H5)
(H5)
(H3)
(H1)
(H1)
(H1)
(H1)
(H1)
(H3)
(H3)
(H3)
(H3)
Allen Key
Allen Key
Feet (H1)
6 x Adjustable
Attach Top & Lower Left Frames (P5&P6) with 2 x Screws (H3) by tightening with the Allen
Key (H5).
Repeat steps for Top & Lower Right Frames (P9&P10).
Secure 4 x Adjustable Feet (H1) to the bottom of Lower Left & Right Frames (P6&P10) as shown.
Attach Top & Lower Middle Frames (P11&P12) with 2 x Screws (H3) by tightening
with the Allen Key (H5). Secure 2 x Adjustable Feet (H1) to the bottom of Lower
Middle Frame (P12) as shown.
Feet (H1)
2 x Adjustable

Page 6
fantasticfurniture.com.au
You will need
Step 4
(P2)
(H3)
(P6)
(H5)
(H3)
12 x Screws
(H5) (P1)
(P2)
(P2)
(P5)
(P6)
(P11)
(P12)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
Allen Key
Attach Top & Lower Left Frames (P5&P6) and Top & Lower Middle Frames (P11&P12) to
Large Top Panel (P1) and Large Shelf Panels (P2x2) with 12 x Screws (H3) as shown by
tightening with the Allen Key (H5).
You will need
(H3)
4 x Screws
(H5) (H3)
(H3)
(H3)
(H3)
(P6)
(P5)
(P12)
(P11)
(P8)
(P8)
(P8)
(H5)
(H3)
(P12)
Allen Key
Secure Hanging Rails (P8x2) to Top & Lower Left Frames (P5&P6) and Top & Lower
Middle Frames (P11&P12) with 4 x Screws (H3) as shown by tightening with the
Allen Key (H5).
Step 3

Page 7
fantasticfurniture.com.au
Step 5
Step 6
You will need
(P7)
(P7)
2 x Nuts
(H4)
(H2)
2 x Screws
(H5)
(H2)
(H4)
x2
Allen Key
Repeat steps for the second set of Back Supports (P7x2).
Secure Back Supports (P7x2) together as shown with 1 x Nut (H4) and 1 x Screw (H2) by
tightening with the Allen Key (H5) and Wrench (H9).
You will need
(H5)
(H5)
(H2)
(H2) (H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
8 x Screws
(P6 )
(P5)
(P12)
(P11)
(P5)
(P7)
(P7)
(P7)
(P7)
Allen Key
Attach Back Supports (P7x4) to Top & Lower Left Frames (P5&P6) and Top & Lower
Middle Frames (P11&P12) as shown with 8 x Screws (H2) by tightening with the Allen
Key (H5).
1 x Wrench (H5)
(H2)
(P7)
(P7)
(H4)
(H9)
(H9)
(H9)

Page 8
Step 7
Step 8
You will need
(H3)
24 x Screws
(H5)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3) (H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(P4)
(P4)
(P4)
(P4)
(P4)
(P3)
(P4)
(H5)
Allen Key
Attach Small Top Panel (P3) and Small Shelf Panels (P4x5) to Top & Lower Middle
Frames (P11&P12) and Top & Lower Right Frames (P9&P10) with 24 x Screws (H3) as shown
by tightening with the Allen Key (H5).
You will need (H7)
(H8)
WARNING:ENSURETHE
WALLSTRAPIS
ATTACHEDTOAVOIDSERIOUSINJURY.
Toavoidany
seriousorfatalinjury,thisproducthasbeen
fittedwithawallstraptopreventtoppling.Westrongly
recommendthatthisproductispermanentlyfixed tothe
wallorothersuitable surface.Fixing devicesare not
includedsincedierentsurfacematerialsrequire
di erentattachments.Pleaseseekprofessionaladvice
ifyouareindoubtofwhatfixingdevicetouse.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentrePtyLtd
71SevilleStreet
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123
) 6H(
Phillips head
Screwdriver
2 x Wall Straps 2 x Wall Strap
Screws
2 x Washers
(H6) (H7)
)8H(
(P1)
(P3)
Attach 2 x Wall Straps (H6) toTop Panels (P1 & P3) with 2 x Washers (H8) and 2 x Wall
Strap Screws (H7) by tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au
(P9)
(P10)
(P11)
(P12)

Page 9
fantasticfurniture.com.au
Job Complete!
In the interest of our environment
packaging thoughtfully.
please dispose of all
WARNING:ENSURETHEWALLSTRAPIS
ATTACHEDTOAVOIDSERIOUSINJURY.
Toavoidanyseriousorfatalinjury,thisproducthasbeen
fittedwithawallstraptopreventtoppling.Westrongly
recommendthatthisproductispermanentlyfixedtothe
wallorother suitable surface. Fixing devicesare not
includedsincedierentsurfacematerialsrequire
dierentattachments.Pleaseseekprofessionaladvice
ifyouareindoubt ofwhatfixing devicetouse.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentrePtyLtd
71Sevi
lleStreet
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123
You will need
Screws and wall plugs are not
provided please use appropriate
fixtures for your wall.
Seek advice from a qualified trades person
on how to attach this to your specific wall.
2 x Washers
(H8)
(H8)
We strongly suggest using the wall strap
to prevent this unit from toppling.
Move furniture to its final position,
firmly attached and a snug fit.
then connect the ends of 2 x Wall
(H6 )
Straps (H6) to the wall.Make sure it is
(H6 )
WARNING:ENSURETHEWALLSTRAPIS
ATTACHEDTOAVOIDSERIOUSINJURY.
Toavoidanyseriousorfatalinjury,thisproducthasbeen
fittedwithawallstraptopreventtoppling.Westrongly
recommendthatthisproductispermanentlyfixedtothe
wallorothersuitable surface.Fixing devicesarenot
includedsincedierentsurfacematerialsrequire
di erentattachments.Pleaseseekprofessionaladvice
ifyouareindoubtofwhatfixing devicetouse.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentrePtyLtd
71Sevi
lleStreet
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123
(H6 )
Step 9
C

Version 1.0
fantasticfurniture.com.au
Sonoma
Utility 3 Shelf