fantastic furniture Rori Recliner 1 STR User manual

Rori
Recliner 1 STR
fantasticfurniture.com.au

Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au

Assembly checklist
Useful information
Read through the instructionscarefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3fantasticfurniture.com.au

What you need
to assemble the product
Parts list
Seat Base (P1);
Seat Back (P2);
4 x Plastic Legs (P3);
Seat Base (P1)
Seat Back (P2)
Legs (P3)
Page 4
fantasticfurniture.com.au

Page 5fantasticfurniture.com.au
Step 1
Fx the 4 x plastic legs (P3) into the holeson bottom of the seat base (P1), tighten the
legs as shown.

Page 6fantasticfurniture.com.au
Step 2
Step 3
Attach the seat back (P2) to the seat base (P1) as shown.
Make sure the clips are aligned before inserting the back. Ensure the seat back (P2) is
fully slotted on the brackets before use.
Ensure to attach the fabric flap to the back of the seat base (P1).

Page 7fantasticfurniture.com.au
Step 3
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.