fantastic furniture Waterfall User manual

Version 1.0
Waterfall
fantasticfurniture.com.au
Queen Bed
APPROVED LP
24/11/2020

fantasticfurniture.com.au Page 2Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver;
Headboard
(P1)
Side Rail
(P5)
Side Rail
(P5)
Timber Cross Rail
(P10)
Footboard
(P2)
Plastic Leg
(P3)
Centre Rail
(P6)
Support Leg
(P4) Support Leg
(P4)
Metal Leg
(P12)
Footboard Leg
(P11)
Support Wood
fantasticfurniture.com.au Page 4
Footboard (P2) ; 2 x Plastic Legs (P3) ; 2 x Support Legs (P4) ; 2 x Side Rails (P5) ;
Headboard (P1) ; 28 x Slats (P9)
Parts list
Box 1 :
Box 2 :
Centre Rail (P6) ; 28 x End Connectors (P7) ; 14 x Centre Connectors (P8) ;
Timber Cross Rail (P10) ; 2 x Footboard Leg Support Wood (P11) ; 2 x Metal Legs (P12) ;
28 x End Connectors (P7) 14 x Centre Connectors (P8)
28 x Slats (P9)
Hardware pack
8 x Small Bolts
(H1)
1 x Allen Key
(H2)
6 x Large Screws
(H3)
6 x Medium Bolts
(H4)
10 x Washers
(H5)
2 x Small Screws
(H6)
1 x Felt Pad
(H7)
8 x Spring Washers
(H8)
4 x Large Bolts
(H9)
Plastic Leg
(P3)
Hardware Pack

Attach 2 x footboard leg support wood (P11) to footboard (P2) using 4 x bolts (H9),
(P3)
(P1)
Attach 2 x plastic legs (P3) to the bottom of headboard (P1).
(P12)
(P2)
(H5) (H8) (H9)
(H2)
fantasticfurniture.com.au Page 5
Step 1
Attach 2 x metal legs (P12) to the 2 x footboard leg support wood (P11) using
(P11)
Step 2
You will need
6 x Large Screws
(H3)
Allen Key
(H2)
4 x Spring Washers
(H8)
4 x Large Bolts
(H9)
Phillips Head
Screwdriver
4 x Washers
(H5)
4 x spring washers (H8) and 4 x washers (H5), fully tightening with allen key (H2).
6 x screws (H3), fully tightening with a phillips head screwdriver.
(H3)
(P2)

Step 4
Step 3
You will need
8 x Small Bolts
(H1) (H2)
Allen Key
(H1)
(P1)
(P5)
(P5)
(P2)
(H2)
Do not fully tighten the bolts, and ensure you leave a 8mm gap between the head of the bolt
and the brackets on the headboard (P1) and footboard (P2).
the other 1 x side rail (P5).
fantasticfurniture.com.au Page 6
You will need
2 x Washers
(H5)
2 x Medium Bolts
(H4)
(P6)
(H4)
(H5)
(P4)
Attach 2 x support legs (P4) to the centre rail (P6) using 2 x bolts (H4) and 2 x washers (H5),
fully tightening with allen key (H2).
(H2)
Allen Key
(H2)
With assistance, attach 1 x side rail (P5) to the headboard (P1) and footboard (P2) by slotting the
bracket on the side rail (P5) over the bolts on the headboard (P1) and footboard (P2). Repeat for
Do not tighten the bolts until Step 7.
Attach 4 x bolts (H1) to the brackets on headboard (P1) footboard (P2) using allen key (H2).

Step 6
(H5)
(H4) (P6)
(P1)
(P5)
(P5)
(P6)
(P2)
Adjust to be 10mm gap from floor
to the bottom of support legs.
Slot the centre rail (P6) between the headboard (P1) and footboard (P2) and attach using
Adjust the 2 x support legs (P4) so the adjusters are sitting approximately 10mm off of the floor.
Step 5
You will need
4 x Washers
(H5)
4 x Medium Bolts
You will need
28 x End
Connectors
(P7)
14 x Centre
Connectors
(P8)
28 x Slats
(P9)
(P7) (P7)
(P8)
1
Attach 2 x end connectors (P7), 2 x slats (P9) and 1 x centre connector (P8)
together as shown.
fantasticfurniture.com.au Page 7
(P9) (P9)
Allen Key
(H2) (H4)
(H2)
(H8)
4 x Spring Washers
(H8)
With assistance, move the bed to its final position.
4 x bolts (H4), 4 x spring washers (H8) and 4 x washers (H5). Do not fully tighten the bolts until
Step 7.

fantasticfurniture.com.au Page 8
2
3
4
Attach the assembled slats by pressing down the connectors (P7, P8) into the holes on the
Sometimes it makes it easier to line up the
holes if you carefully press down the centre of each slat
to flatten it out.
Repeat for every bed slat until finished.
2 x side rails (P5) and centre rail (P6) until they lock.

Step 7
You will need
2 x Small Screws
(H6)
Phillips Head
Screwdriver
(H2)
Allen Key
Felt Pad
(H7)
(H2)
(H6)
(P10)
(P1)
(P5) (P2)
(P10)
(H7)
(P6)
Make sure
screws are fully tightened.
Ensure the inner space is square.
Stick the felt pad (H7) onto the centre of centre rail (P6).
Attach the timber cross rail (P10) to the centre of the 2 x side rails (P5) using 2 x screws (H6),
fully tightening using a phillips head screwdriver.
You may now fully tighten all bolts connecting the headboard (P1) and footboard (P2)
fantasticfurniture.com.au Page 9
to the 2 x side rails (P5) and the centre rail (P6).

Step 8
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
fantasticfurniture.com.au Page 10