fantastic furniture TOTO D4 User manual

Version 1.0
FURNITURE
Table D4
www.fantasticfurniture.com.au
TOTO

PAGE 2
FURNITURE
www.fantasticfurniture.com.au
WARNING : For safety any straps
used to secure hardware or
furniture parts must be removed
before this product is used.
Enjoy
Your purchase from
Australia’s Best Value furniture

FURNITURE
PAGE 3
www.fantasticfurniture.com.au
Assembly checklist
Read through the instructions carefully
before you begin. Make sure you have all the required tools. Never use power tools unless instructed.
Identify and lay out all the components
before you begin assembly. Unless instructed, do not fully tighten
screws until the item is fully assembled.
Useful Information
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help centre for further assistance.

What you need
to assemble the product
PAGE 4
FURNITURE
DO NOT USE
www.fantasticfurniture.com.au
Table Leg
(P2)
Table Leg
(P2)
Table Leg
(P2)
Table Leg
(P2)
Table Top
W/Apron (P1)
Parts list
Table Top (P1); Table Leg (P2);
Hardware Pack.
1 x Allen Key
(H1) 8 x Bolts
(H2) 8 x Spring Washer
(H3) 8 x Flat Washer
(H4)

Step 1
FURNITURE
You will need
PAGE 5
www.fantasticfurniture.com.au
H3
H2
H1 H4
(P2) (P2)
(P2)
(P2)
(P1)
1 x Allen Key
(H1)
8 x Bolts
(H2)
Spring Washer
(H3) Flat Washer
(H4)
Attach table legs to table apron using Bolts
(H2) and Washers (H3) & (H4).
Note : Do not tighten bolts until table is on
flat surface.

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
FURNITURE
PAGE 6
www.fantasticfurniture.com.au

RETRO
Chair 1 STR
www.fantasticfurniture.com.au
Version 1.0

PAGE 2www.fantasticfurniture.com.au
Enjoy
Your purchase from
Australia’s Best Value Furniture Store
Note: Recommend weight capacity 120kg

Read through the instructions carefully
before you begin.
Assembly checklist
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
!If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
PAGE 3www.fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need
PAGE 4www.fantasticfurniture.com.au
Parts list
Box 1: Seat (P1) x 1;
Seat Pad (P2) x 1
Base plate (P3) x 1
Legs (P4) x 4
N/A
Seat
(P1)
Seat Pad
(P2)
2 x Bolts
M6x20mm
(H1)
1 x Allen Key
(H4)
4 x Bolts
(H2)
M6x16mm
12 x Bolts
(H3)
M6x8mm 5mm
1 x Allen Key
(H5)
4mm
Base Plate
(P3)
Legs
(P4)