fantastic furniture Bridge User manual

Bridge
Console Table Oak

Table Top(P1)
2 x Table Leg Frames(P2)
4 x Support Bars(P3)
4 x Small Bolts
(H2)
4 x Washers
(H3)
4 x Levelling Feet
(H5)
8x Large Bolts
(H1)
Allen Key
(H4)
Support Bar(P3)
Support Bar(P3)
Support Bar(P3)
Support Bar(P3)
Table Leg Frame
(P2)
Hardware Pack
Table Leg Frame
(P2)

P3
Step 1
Step 5
Allen Key
(H4)
4 x Bolts
(H1)
P2
H4
H1
Align 2 x support bars (P3) between the 2 x table leg frames (P2).
Attach using 4 x bolts (H1) tightening with the allen key (H4).
Do not fully tighten the bolts until step 2.
What you need:

P3
Step 2
Step 6
Allen Key
(H4)
4 x Bolts
(H1)
H4 H1
Align 2 x support bars (P3) between the 2 x table leg frames (P2).
Attach using 4 x bolts (H1) tightening with the allen key (H4).
You may now fully tighten all bolts securing the support bars (P3)
to the table leg frames (P2).
What you need:

Step 3
Step 7
4 x Bolts
(H2)
4 x Washers
(H3)
4 x Levelling Feet
(H5)
Allen Key
(H4)
H5
P1
H4
H2
H3
What you need:
Place the assembled frame (P2, P3) onto table top (P1).
the holes on the leg frames (P2) with the holes on the table top (P1).
Attach using 4 x bolts (H2) and 4 x washers, tightening with allen key (H4).
Attach 4 x levelling feet (H5) into the holes on the 2 x leg frames (P2)
by turning clockwise until tight. Carefully turn the table over.

Step 8