fantastic furniture Knox User manual

Version 1.0
Knox
Bookcase
fantasticfurniture.com.au

Secure it!
Wall attachment guide
or plasterboard
(with available wood stud)
Screw inserted directly into
stud.
ARNIN N UR TH A TRAP I ATTACH T
A I RI U IN UR R ATH.
included since dierent surface materials require dierent attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
• Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
• Avoid putting a on this product.
Reduce the risk of furniture
tip-over accidents
Page 2
or plasterboard
(without available wood stud)
Self drilling plasterboard
anchor.
or asonry wall
Screw
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
Recommended weight capacity: 25kg per Shelf

Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Git Card!
@fantasticfurniture
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au Page 4
Assembly checklist
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identiy and lay out all of the compenents
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Useful information
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a sot surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky itmes such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasterners. Check the product care label or website for
product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.

fantasticfurniture.com.au Page 5
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Mallet.
Parts list
Shelf Panel 1 (P1);
Shelf Panel 2 (P2);
4x Sehlf Panels 3 (P3);
5x Vertical Panels (P4)
Hardware pack
1 x Glue
(H1)
20 x Wood Dowels
M8 × 25
(H2)
10 x Cam
Bolts
(H3)
10 x Cam
Nuts
(H4)
1 x Allen Key
(H5)
10 x Metal
Tube Poles
(H6)
10 x Long
Screws x 40mm
(H7)
Shelf Panel 1
(P1)
1 x Webbing
(H11)
1 x Pan Head
Short Screw x 16mm
(H12)
1 x Flat
Washer
(H13)
10 x Tube
Screws
(H8)
4 x Plastic
Feets
(H9)
4 x Medium
Screws x 30mm
(H10)
10 x Stickers
(H14)
10 x Long
Screws x 50mm
(H15)
Shelf Panel 2
(P2)
Shelf Panel 3
(P3) Vertical
Panel
(P4)
Shelf Panel 3
(P3)
Shelf Panel 3
(P3)
Shelf Panel 3
(P3)
Vertical
Panel
(P4)
Vertical
Panel
(P4)

fantasticfurniture.com.au Page 6
Step 1
You will need
20 x Wood
Dowels
M8 × 25
(H2)
Mallet
(H2) (P4)
Using a mallet, gently tap 20x Wood Dowels (H2) into pre-drilled holes in 5x Vertical
Panels (P4).
Step 2
(H3)
(P1)
Fix 2x Cam Bolts (H3) to Shelf Panel 1 (P1) as per Detail A.
Tighten with a phillips head screwdriver.
You will need
2 x Cam
Bolts
(H3)
Phillips Head
Screwdriver
(X5)
DETAIL A
DETAIL A
DETAIL A
DETAIL A

fantasticfurniture.com.au Page 7
Step 3
You will need
1 x Glue
(H1)
Fix 2x Tube Screws (H8) to Shelf Panel 1 (P1) as per Detail C. Fix 2x Metal Tube Poles (H6) to
Shelf Panel 1 (P1). Place a small amount of Glue (H1) to dowel holes as per Detail B.
Fix Vertical Panel (P4) to Shelf Panel 1 (P1) using 2x Cam Nuts (H4) as per Detail A and tighten
using phillips head screwdriver.
Step 4
(H7)
(P4)
Place a small amount of Glue (H1) in Wood Dowels as per Detail A.
Fix Shelf Panel 3 (P3) to Vertical Panel (P4) and Metal Tube Poles (H6).
Tighten with 2x Long Screws x 50mm (H15) using phillips head screwdriver
and 2x Long Screws x 40mm (H7) using Allen Key (H5).
DETAIL A
2 x Metal
Tube Poles
(H6)
2 x Cam
Nuts
(H4)
2 x Tube
Screws
(H8)
Phillips
Head
Screwdriver
You will need
1 x Glue
(H1)
2 x Long
Screws
x40mm
(H7)
1 x Allen
Key
(H5)
2 x Long
Screws
x50mm
(H15)
Phillips
Head
Screwdriver DETAIL A
(H1)
(P3)
(H5)
(H15)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
(H6)
(P4)
DETAIL C
DETAIL B
(H8)
(P1)
DETAIL A
DETAIL A
DETAIL B
DETAIL C
(H1)
(H4)

fantasticfurniture.com.au Page 8
Step 5
You will need
1 x Glue
(H1)
Fix 2x Tube Screws (H8) to Shelf Panel 3 (P3) as per Detail C. Fix 2x Metal Tube Poles (H6) to
Shelf Panel 3 (P3). Fix 2x Cam Bolts (H3) to Shelf Panel 3 (P3) as per Detail B. Place a small
amount of Glue (H1) to dowel holes as per Detail D. Fix Vertical Panel (P4) to Shelf Panel 3 (P3)
using 2x Cam Nuts (H4) as per Detail A and tighten using phillips head screwdriver.
Step 6 (H7)
(P4)
Place a small amount of Glue (H1) in Wood Dowels as per Detail A.
Fix Shelf Panel 3 (P3) to Vertical Panel (P4) and Metal Tube Poles (H6).
Tighten with 2x Long Screws x 50mm (H15) using phillips head screwdriver
and 2x Long Screws x 40mm (H7) using Allen Key (H5).
DETAIL A
2 x Metal
Tube Poles
(H6)
2 x Cam
Nuts
(H4)
2 x Tube
Screws
(H8)
Phillips
Head
Screwdriver
You will need
1 x Glue
(H1)
2 x Long
Screws
x40mm
(H7)
1 x Allen
Key
(H5)
2 x Long
Screws
x50mm
(H15)
Phillips
Head
Screwdriver
DETAIL A
(H1)
(P3)
(H5)
(H15)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
DETAIL C
DETAIL D DETAIL A
2 x Cam
Bolts
(H3)
(H1)
DETAIL B
(H8) (H3)
DETAIL B
(H6)
(P4)
(P3)
DETAIL A
DETAIL D
DETAIL C
(H4)

fantasticfurniture.com.au Page 9
Step 7
You will need
1 x Glue
(H1)
Fix 2x Tube Screws (H8) to Shelf Panel 3 (P3) as per Detail C. Fix 2x Metal Tube Poles (H6) to
Shelf Panel 3 (P3). Fix 2x Cam Bolts (H3) to Shelf Panel 3 (P3) as per Detail B. Place a small
amount of Glue (H1) to dowel holes as per Detail D. Fix Vertical Panel (P4) to Shelf Panel 3 (P3)
using 2x Cam Nuts (H4) as per Detail A and tighten using phillips head screwdriver.
Step 8
(H7)
(P4)
Place a small amount of Glue (H1) in Wood Dowels as per Detail A.
Fix Shelf Panel 3 (P3) to Vertical Panel (P4) and Metal Tube Poles (H6).
Tighten with 2x Long Screws x 50mm (H15) using phillips head screwdriver
and 2x Long Screws x 40mm (H7) using Allen Key (H5).
DETAIL A
2 x Metal
Tube Poles
(H6)
2 x Cam
Nuts
(H4)
2 x Tube
Screws
(H8)
Phillips
Head
Screwdriver
You will need
1 x Glue
(H1)
2 x Long
Screws
x40mm
(H7)
1 x Allen
Key
(H5)
2 x Long
Screws
x50mm
(H15)
Phillips
Head
Screwdriver
DETAIL A
(H1)
(P3)
(H5)
(H15)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
DETAIL C
DETAIL D DETAIL A
2 x Cam
Bolts
(H3)
(H1)
DETAIL B
(H8) (H3)
DETAIL B
(H6)
(P4)
(P3)
DETAIL A
DETAIL D
DETAIL C
(H4)

fantasticfurniture.com.au Page 10
Step 9
You will need
1 x Glue
(H1)
Fix 2x Tube Screws (H8) to Shelf Panel 3 (P3) as per Detail C. Fix 2x Metal Tube Poles (H6) to
Shelf Panel 3 (P3). Fix 2x Cam Bolts (H3) to Shelf Panel 3 (P3) as per Detail B. Place a small
amount of Glue (H1) to dowel holes as per Detail D. Fix Vertical Panel (P4) to Shelf Panel 3 (P3)
using 2x Cam Nuts (H4) as per Detail A and tighten using phillips head screwdriver.
Step 10 (H7)
(P4)
Place a small amount of Glue (H1) in Wood Dowels as per Detail A.
Fix Shelf Panel 3 (P3) to Vertical Panel (P4) and Metal Tube Poles (H6).
Tighten with 2x Long Screws x 50mm (H15) using phillips head screwdriver
and 2x Long Screws x 40mm (H7) using Allen Key (H5).
DETAIL A
2 x Metal
Tube Poles
(H6)
2 x Cam
Nuts
(H4)
2 x Tube
Screws
(H8)
Phillips
Head
Screwdriver
You will need
1 x Glue
(H1)
2 x Long
Screws
x40mm
(H7)
1 x Allen
Key
(H5)
2 x Long
Screws
x50mm
(H15)
Phillips
Head
Screwdriver DETAIL A
(H1)
(P3)
(H5)
(H15)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
DETAIL C
DETAIL D DETAIL A
2 x Cam
Bolts
(H3)
(H1)
DETAIL B
(H8) (H3)
DETAIL B
(H6)
(P4)
(P3)
DETAIL A
DETAIL D
DETAIL C
(H4)