fantastic furniture Alfa User manual

Version 1.0
Alfa
Utility 3 Shelf
fantasticfurniture.com.au

Secure it!
Wall attachment guide
or plasterboard
(with available wood stud)
Screw inserted directly into
stud.
ARNIN N UR TH A TRAP I ATTACH T
A I RI U IN UR R ATH.
included since dierent surface materials require dierent attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
• Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
• Avoid putting a on this product.
Reduce the risk of furniture
tip-over accidents
Page 2
or plasterboard
(without available wood stud)
Self drilling plasterboard
anchor.
or asonry wall
Screw
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
Recommended weight capacity: 20kg per Shelf

Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Git Card!
@fantasticfurniture
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au Page 4
Assembly checklist
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identiy and lay out all of the compenents
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Useful information
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a sot surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky itmes such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasterners. Check the product care label or website for
product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.

fantasticfurniture.com.au Page 5
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Mallet.
Parts list
2x Side Panels (P1);
2x Shelf Panels 1 (P2);
2x Shelf Panels 2 (P3);
3x Back Panels (P4)
Shelf Panel 1
(P2)
Shelf Panel 1
(P2)
Shelf Panel 2
(P3)
Shelf Panel 2
(P3)
Side Panel
(P1)
Side Panel
(P1)
Back Panel
(P4)
Back Panel
(P4)
Back Panel
(P4)
Hardware pack
16 x Long Screws
(H1)
16 x Stickers
(H2)
4 x Wood Dowels
M6 × 25
(H3)
4 x Dowel Plugs
(H4)
1 x Webbing
(H5)
1 x Pan Head Screw
M3.5 × 12
(H6)
1 x Flat Washer
(H7)

fantasticfurniture.com.au Page 6
Step 1
You will need
8 x Long Screws
(H1)
Phillips head
screwdriver
(H1)
(P1)
(P2)
(P3)
(P3)
(P2)
Attach 2x Shelf Panels 1 (P2) and 2x Shelf Panels 2 (P3) to the Side Panel (P1) with
8x Long Screws (H1). Tighten with a phillips head screwdriver.
Step 2
(P2) (P2)
(P3) (P3)
(P1)
(P4) (P4) (P4)
Slide 3x Back Panels (P4) into grooves of 2x Shelf Panels 1 (P2) and 2x Shelf Panels 2 (P3).

fantasticfurniture.com.au Page 7
Step 3
You will need
8 x Long Screws
(H1)
Phillips head
screwdriver
(H1)
(P1)
(P2) (P3)
(P3) (P2)
Fix Side Panel (P1) to main assembly with 8x Long Screws (H1) and tighten with a
phillips head screwdriver.
Place 16x Stickers (H2) to cover screws.
(P4)(P4) (P4)
(H2)
(P1)
(P2)
(P3)
(P3)
(P2)
(P4)
(P4)
(P4)
(P1)
Step 4
You will need
16 x Stickers
(H2)
(P1)

fantasticfurniture.com.au Page 8
Step 5
You will need
Phillips head
screwdriver
(P1)
Attach the Webbing (H5) to the unit using the Flat Washer (H7) and Pan Head Screw (H6).
We strongly advise that you secure the unit to a wall using the Webbing provided, to
prevent the unit from toppling.
Move furniture to its final position, then connect the end of the Webbing (H5) to the
wall, ensuring it is firmly attached. Seek advice from a qualified trades person on
how to attach this to your specific wall. Screws and wall plugs are not supplied.
Please use appropriate fixtures for your wall.
(P4)
(P4)
(P4)
Step 6
(H6)
(H7)
(H5)
30MM
1 x Webbing
(H5)
1 x Pan Head
Screw
M3.5 × 12
(H6)
1 x Flat Washer
(H7)

fantasticfurniture.com.au Page 9
Step 7
You will need
To stack multiple units together please use 4x Wood Dowels (H3) and align unit to connect.
For individual units please use 4x Dowel Plugs (H4).
In the interest of our environment please dispose
of all packaging thoughfully.
(P2) (P2)
Step 8
4 x Wood
Dowels
M6 × 25
(H3)
4 x Dowel
Plugs
(H4)
Mallet
(H3) (H4)
OR
Job complete!