fantastic furniture Havana Robe 2 Door 1 Drawer User manual

Version 1.0
Havana
Robe 2 Door 1 Drawer
fantasticfurniture.com.au

WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Recommended weight capacity : 10kgs/shelf.

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

10 x Wedges
(H23)
12 x Wedge
Screws (H24)
Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Leg (P4);
Leg (P5);
Leg (P6);
Leg (P7);
3 x Back Panels (P8);
2 x Rail (P9);
Rail (P10);
Rail (P11);
Shelf Panel (P12);
Left Door (P13);
Right Door (P14);
Drawer Fronts (P15);
Left Drawer Sides (P16);
Right Drawer Sides (P17);
Drawer Back (P18);
Support Rail (P19); Drawer Base (P20)
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
DO NOT USE
fantasticfurniture.com.au
33 x Dowels
(H1)
6 x Long
Screws
(H2)
12 x Small
Screws
(H5)
40 x Timber
Screws (H17)
2 x Hanger
Support
(H14)
1 x Hanger
(H15)
6 x Hinges
(H16)
1 x CL Runner
Tracks
(H6)
1 x CR Runner
Tracks
(H7)
48 x Cam
Bolts
(H3)
48 x Cam
Nuts
(H4)
5 x Small
Cam Nuts
(H11)
2 x Handles
(H12)
8 x Handle
Bolts
(H13)
1 x DL Runners
(H8)
1 x DR Runners
(H9)
5 x Small
Cam Bolts
(H10)
4 x Plastic
Glides (H18)
1 x Wedge
(H19)
2 x Steel Plate
(H20)
2 x Long Handles
(H21) 1 x Safety
Strap
(H25)
2 x Washers
(H27)
1 x Screw
(L25mm)
(H26)
1 x Magnetics
(H22)
Right Side
Panel
(P3)
Right
Door
(P14)
Left
Door
(P13)
Left Drawer
Side
(P16)
Drawer
Front
(P15)
Right Drawer
Side (P17)
Drawer Back
(P18)
Drawer Base
(P20)
Support
Rail
(P19)
Left Side
Panel
(P2)
Leg
(P4)
Leg
(P5)
Leg
(P6)
Leg
(P7)
Rail
(P9)
Rail
(P9)
Rail
(P11)
Rail
(P10)
Back
Panel
(P8)
Back
Panel
(P8)
Back
Panel
(P8)
Shelf
Panel
(P12)
Top Panel
(P1)

You will need
Step 1
Phillips Head
Screwdriver
Step 2
You will need
Phillips Head
Screwdriver
Secure 24 x Cam Bolts (H3) to
Legs (P4, P5, P6, P7) by tightening
with the Phillips Head Screwdriver.
Attach 4 x Plastic Glides (H18) to
Legs(P4&P5&P6&P7) by a Hammer.
(P4)
(P4)
(P2)
(P3)
(P7)
(P6)
(P5)
(P5)
(P6) (P7)
H3
H4
H4
H1
H1
H4
H4
H1
H1
H3
H3 H3
24 x Cam Bolts
(H3)
24 x Cam Nuts
(H4)
16 x Dowels
(H1)
fantasticfurniture.com.au Page 5
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 16 x Dowels (H1) into the holes
of Side Panels (P2&P3) as shown. Insert
24 x Cam Nuts (H4) into the holes of Side
Panels (P2& P3) as shown. Rotate the cam
nuts so the arrows point towards the incoming
cam bolts. Attach Legs (P4&P5) to Left Side Panel (P2)
and Legs (P6&P7) to Right Side Panel (P3). Tightening Cam Nuts
with the Phillips Head Screwdriver.
4 x Plastic
Glides (H18)
H18
H18
H18 H18
Hammer

You will need
Step 4
You will need
Step 3
Secure 8 x Cam Bolts (H3) to Legs (P6&P7) and
Right Panel (P3)as shown by tightening with the Phillips
Head Screwdriver. Attach 1x CR Runner (H7) to Right Side Panel (P3)
with 3 x Small Screws (H5) by tightening with the Phillips Head Screwdriver.
Secure 8 x Cam Bolts (H3) to Legs (P4&P5) and Side Panel (P2) as shown
by tightening with the Phillips Head Screwdriver. Attach 1x CL Runner (H6) to
Left Side Panel (P2) with 3 x Small Screws (H5) by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
Phillips Head
Screwdriver
8 x Cam Bolts
(H3)
1 x CL Runner
Track (H6)
3 x Small
Screws (H5) (P2)
(P4)
(P5)
(P3)
H3
H5 H6
8 x Cam Bolts
(H3)
3 x Small
Screws (H5)
1 x CR Runner
Track (H7)
H5
H3
H7
(P6)
(P7)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
CL
H5
H6
CR
H5
H7

Step 6
You will need
Step 5
Insert 8 x Cam Nuts (H4) into the holes
of Rails (P9&P10&P11) and Shelf Panel (P12)
as shown. Rotate the cam nuts so the arrows
point towards the incoming cam bolts. Attach
Rails (P9&P10&P11) and Shelf Panel (P12) to Legs
(P4&P5) and Side Panel (P2) as shown by tightening
with the Phillips Head Screwdriver.
Slide the Back Panels (P8x2) into the grooves of Rails (P9x2 &P11) as shown.
(P9)
(P9)
(P12)
(P2) (P10)
(P11)
H4
H4
H1
H1
(P9)
(P9)
(P11)
(P8)
(P8)
fantasticfurniture.com.au Page 7
Phillips Head
Screwdriver
8 x Cam Nuts
(H4)
4 x Dowels
(H1)
Ensure laminated
side of panel is
facing inwards.

(P3)
(P9)
(P9)
(P11)
(P10)
H1
H4
(P2)
(P2)
(P8)
You will need
Step 7
Phillips Head
Screwdriver
Insert 4 x Dowels (H1) into the holes of
Rails (P10&P11) and Shelf Panel (P12) as shown.
Insert 8 x Cam Nuts (H4) into the holes of Rails (P9&P10&P11)
and Shelf Panel (P12) as shown. Rotate the cam nuts so the
arrows point towards the incoming cam bolts. Attach Legs (P7&P8)
and Side Panel (P3) to Rails (P9&P10&P11) and Shelf Panel (P12) as shown by
tightening with the Phillips Head Screwdriver.
Slide the Back Panel (P8) into the grooves of legs (P4 &P6) as shown.
fantasticfurniture.com.au Page 8
Step 8
8 x Cam Nuts
(H4)
4 x Dowels
(H1)
Ensure laminated
side of panel is
facing inwards.

Secure 8 x Cam Bolts (H3) to Top Panel (P1) by tightening with the Phillips Head
Screwdriver. Attach 1 x Magnetics (H22) to Top Panel (P1) using Wedge Screws (H24)
by tightening with the Phillips Head Screwdriver.
You will need
Step 9
Phillips Head
Screwdriver
8 x Cam Bolts
(H3)
(P1)
H3
H3
H22
H24
Insert 8 x Dowels (H1) into the holes
of Legs (P4&P5&P6&P7) and Side
Panels (P2&P3) as shown. Insert 8
x Cam Nuts (H4) into the holes of
Legs (P4&P5&P6&P7) and Side
Panels (P2&P3) as shown. Rotate
the cam nuts so the arrows point
towards the incoming cam bolts.
Attach Top Panel (P1) to the unit as
shown by tightening with the Phillips Head Screwdriver.
Step 10
You will need
Phillips Head
Screwdriver
(P1)
(P2)
(P3)
H4
H1
2 x Wedge
Screws (H24)
fantasticfurniture.com.au Page 9
1 x Magnetics
(H22)
8 x Cam Nuts
(H4)
8 x Dowels
(H1)

You will need
Step 11
Attach 2 x Hanger Support (H14) to Side Panels (P2&P3) with 4x Timber Screws (H17) by
tightening with the Phillips Head Screwdriver. Attach 1 x Hanger (H15) to the holes of Hanger
Support as shown.
Phillips Head
Screwdriver
(P2)
(P3)
H15
H15
H14
H17
You will need
Step 12
Phillips Head
Screwdriver
Secure 5x Small Cam Bolts (H10) to Drawer Front (P15) by tightening with the Phillips
Head Screwdriver.
H10
H10
H10
(P15)
fantasticfurniture.com.au Page 10
4 x Timber
Screws (H17)
2 x Hanger
Support (H14)
1 x Hanger
(H15)
5 x Small Cam
Bolts (H10)