fantastic furniture Oasis User manual

Oasis
Coee Table White Rattan
fantasticfurniture.com.au
Version 1.0

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Recommended weight capacity :
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Page 2
15kg/Drawer.

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Bottom Panel (P2);
Left Side Panel (P3);
Right Side Panel (P4);
Divider (P5);
Divider (P6);
2 x Rails (P7);
2 x Rails (P8);
Drawer Front (P9);
Left Drawer Side (P10);
Right Drawer Side (P11);
Drawer Base (P12);
Drawer Back (P13)
Hardware pack
Top Panel
(P1) Right Side
Panel (P4)
Left Side
Panel (P3)
Divider
(P5)
Divider
(P6)
Left
Drawer
Side (P10)
Drawer
Front (P9)
Right
Drawer
Side (P11)
Drawer
Back (P13)
Drawer
Base (P12)
Bottom Panel
(P2)
Rail
(P8)
Rail
(P8)
Rail
(P7)
Rail
(P7)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
fantasticfurniture.com.au
DO NOT USE
20 x Dowels
(H1)
10 x Long
Screws
(H2)
10 x Small
Screws
(H5)
22 x Cam Bolts
(H3)
22 x Cam Nuts
(H4)
6 x Plastic
Glides
(H10)
1 x Handle
(H11)
2 x Handle Screws
(H12)
1 x CL Runner
Track
(H6)
1 x CR Runner
Track
(H7)
1 x DL Runner
(H8)
1 x DR Runner
(H9)

6 x Small
Screws (H5)
(P3)
(P1)
(P5)
You will need
Step 1
Step 2
You will need
Attach 1 x CL Runner Track (H6) to Left Side Panel (P3) with 3 x Small Screws (H5).
Attach 1 x CR Runner Track (H7) to Divider (P5) with 3 x Small Screws (H5).
Tighten with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 5
Phillips Head
Screwdriver
Phillips Head
Screwdriver
Attach 6 x Cam Bolts (H3) to Top Panel (P1) as shown by tightening with the
Phillips Head Screwdriver.
1 x CR Runner
Track (H7)
H6
H6
H7
H5
H3
H5
H5
H5
H5
H5
CL
H5
1 x CL Runner
Track (H6)
H7
CR
H5
H3
H3
H3
H3
H3
6 x Cam Bolts
(H3)

Insert 6 x Dowels (H1) into Top Panel (P1).
Insert 6 x Cam Nuts (H4) into Left & Right Side Panels (P3 & P4) and Divider (P5) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach
Left & Right Side Panels (P3 & P4) and Divider (P5) to Top Panel (P1) by tightening
all cam nuts with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 6
Step 4
You will need
Phillips Head
Screwdriver
Step 3
You will need
Attach Left Side Panel (P3) and Divider (P5) to Divider (P6) with 4 x Dowels (H1) as shown.
6 x Dowels
(H1)
4 x Dowels
(H1)
6 x Cam Nuts
(H4)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P1)
(P5)
(P5)
(P4)
(P6)
(P3)
(P3)
H1
H1
H1
H1
H4
H4
H4
H1
H1
H1
H1
H1
H1

Step 6
You will need
Insert 6 x Dowels (H1) into Left & Right Side Panels (P3 & P4) and Divider (P5).
Attach Bottom Panel (P2) to Left & Right Side Panels (P3 & P4) and Divider (P5)
with 6 x Long Screws (H2) by tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au Page 7
Attach 8 x Cam Bolts (H3) to Bottom Panel (P2) as shown by tightening with the
Phillips Head Screwdriver.
(P2)
(P2)
(P5)
(P4)
(P3)
H3
H3
H3 H3
H3
H3
H3
H3
H2
H1
H1
H1
H1
H2
H2
H2
H2
H2
Phillips Head
Screwdriver
6 x Long
Screws (H2)
6 x Dowels
(H1)
Step 5
You will need
Phillips Head
Screwdriver
8 x Cam Bolts
(H3)

Attach 4 x Cam Bolts (H3) to Rails (P8 x 2) as shown by tightening with the
Phillips Head Screwdriver.
You will need
Step 8
(P8)
(P8)
(P8)
(P7)
(P7)
fantasticfurniture.com.au Page 8
Insert 4 x Dowels (H1) into Rails (P7 x 2). Insert 4 x Cam Nuts (H4) into Rails (P7 x 2).
Rotate the nuts so the arrows point towards the incoming bolts. Attach Rails (P8 x 2)
to Rails (P7 x 2) by tightening all nuts with the Phillips Head Screwdriver.
H3
H1
H1
H1
H1
H4
H4
H4
H4
H3
Phillips Head
Screwdriver
You will need
Step 7
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
x2
4 x Cam Nuts
(H4)
4 x Dowels
(H1)

You will need
Step 9
You will need
Step 10
(P8)
(P8)
(P8)
(P8)
(P2)
(P7)
(P7)
(P7)
(P7)
fantasticfurniture.com.au Page 9
Secure 6 x Plastic Glides (H10) to the bottom of Rails (P7 x 2, P8 x 2) as shown
using the Hammer.
Hammer
6 x Plastic
Glides (H10)
Insert 8 x Cam Nuts (H4) into Rails (P7 x 2, P8 x 2). Rotate the nuts so the arrows
point towards the incoming bolts. Attach Rails (P7 x 2, P8 x 2) to Bottom
Panel (P2) by tightening all nuts with the Phillips Head Screwdriver.
8 x Cam Nuts
(H4)
Phillips Head
Screwdriver
(P4)
(P4)
(P3)
(P3)
H4
H4 H4
H10
H10
H10
H10
H10
H10
H4
H4
H4
H4
H4

You will need
Step 12
Phillips Head
Screwdriver
Attach 4 x Cam Bolts (H3) to Drawer Front (P9) as shown by tightening with the
Phillips Head Screwdriver.
Attach Drawer Back (P13) to Drawer Sides (P10 & P11) with 4 x Long Screws (H2) by tightening
with a Phillips Head Screwdriver.
You will need
Step 11
(P9)
(P10)
(P11)
(P13)
fantasticfurniture.com.au Page 10
H3
H3
H3
H2
H3
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
H2
H2
H2
4 x Long
Screws (H2)