fantastic furniture Java User manual

Version 1.0
Java
Desk 1Drawer
fantasticfurniture.com.au
Required
Two People

fantasticfurniture.com.au Page 2
Warning: Ensure the wall strap is attached
to avoid serious injury
To avoid any serious or fatal injury, a wall strap has been provided with
this product to prevent toppling. We strongly recommend that this
product is permanently fixed to the wall or other suitable surface. Fixing
of what fixing device to use.
Rattan
Rattan is a natural material that will respond to humidity in the
environment. Low humidity may cause the rattan to shrink.
High humidity may cause the rattan to absorb moisture and expand,
causing the weaving to look loose and wavy.
This is a natural phenomenon and not a defect.
Looks like you’ve found
your Fantastic!
Love it? Share it!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram
for your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Recommended weight capacity: 60kgs on top

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

Parts list
1 x Top Panel (P1)
4 x Legs (P2)
Top Panel (P1)
What you need
to assemble the product
Other tools you need
Phillips Head Screwdriver
fantasticfurniture.com.au
Page 4
Leg (P2) Leg (P2)
Leg (P2)
Leg (P2)
Hardware Pack
8 x Bolts
(H1)
12 x Flat Washers
(H2)
8 x Spring Washers
(H3)
2 x Wall Straps
(H4)
2 x Short Screws
(H5)
4 x Felt Pads
(H6)
2 x Long Screws
(H7)
1 x Handle
(H8)
1 x Allen Key
(H9)

Step 1
Page 5fantasticfurniture.com.au
You will need
Attach 4 x Felt Pads (H6) to the bottom of Legs (P2x4)
by removing the adhesive backing and pressing firmly.
Step 2
You will need
8 x Bolts
(H1)
Attach Legs (P2x4) to Top Panel (P1) with 8 x Bolts (H1), 8 x Spring Washers (H3)
and 8 x Flat Washers (H2) as shown by tightening with Allen Key (H9).
(P2)
4 x Felt Pads
(H6)
X4
(H6)
8 x Flat
Washers (H2)
8 x Spring
Washers (H3)
1 x Allen Key
(H9)
(P2)
(H9)
(H1)
(H2)
(H3)
(P1)
(P2)
(P2)
(P2)
(P2)

Step 3
Page 6fantasticfurniture.com.au
You will need
Step 4
You will need
Attach 2 x Wall Straps (H4) to Top Panel (P1) with 2 x Short Screws (H5)
and 2 x Flat Washers (H2) as shown by tightening with the Phillips Head Screwdriver.
2 x Flat
Washers (H2)
2 x Short
Screws (H5)
2 x Wall Straps
(H4)
Phillips Head
Screwdriver
2 x Long
Screws (H7)
We strongly recommend
that this product is permanently
fixed to the wall
or other suitable surface.
(H5)
(H2)
(H4)
(P1)
1 x Handle
(H8)
(H8)
(H7)
(H7)
Gently stand the desk upright.
Attach Handle (H8) to drawer front on Top Panel (P1) as shown with 2 x Long Screws (H7)
by tightening with the Phillips Head Screwdriver.
(P1)
(P1)
(H4)
(H5)
(H2)

Step 5
Page 7fantasticfurniture.com.au
You will need
2 x Flat
Washers (H2)
Phillips Head
Screwdriver
Seek advice from a qualified
trades person on how to
attach this wall strap to
your specific wall.
Screw and wall plug are not included.
Please use appropriate fixtures for your wall.
With assistance, move the desk to the final position.
Attach the wall straps to the wall.
Make sure they are firmly attached and secure.
(H2)
Wall
Screw
(H4)
(H4)
(H4)
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.