Fanvil i10 User manual

Version: 1.0
Release Date: 30th, Dec, 2021
How to use the input port on
intercom to make a call as DSS
key?

Catalog
How to use the input port on intercom to make a call as DSS key? ...........................................1
1. Introduction...........................................................................................................................3
1.1. Overview ......................................................................................................................3
1.2. Applicable Model.........................................................................................................3
1.3. Before You Start...........................................................................................................3
1.4. Connection Diagram.....................................................................................................3
2. Operation Guide ...................................................................................................................4
2.1. Connect the external button to intercom’s input port ...................................................4
2.2. Configure the device.....................................................................................................4

Fanvil Technology Co. Ltd
Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China
Tel: [phone] Email: [email protected] [email protected] Official Web:www.fanvil.com
1. Introduction
1.1.Overview
This document introduces the method to how to use the input port on intercom to make a call as
DSS key. Some customers want to use more function key than the unit provides. In this case, they
can connect an external button to the input port of intercom, and use it as a function.
1.2.Applicable Model
Intercom models: i10, i10D, i10V, i10S, i10SD, i10SV, i16S, i16SV, PA2S
1.3.Before You Start
Step1. Connect your PC and intercom device in to the same PoE switch with Network cable.
Step2. Turn ON your device
Step3. Scan you network for know what it's the IP address assigned on your device via DHCP
1.4.Connection Diagram

Fanvil Technology Co. Ltd
Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China
Tel: [phone] Email: [email protected] [email protected] Official Web:www.fanvil.com
2. Operation Guide
To configure the input port to make call as DSS key, you need perform the following procedure.
2.1.Connect the external button to intercom’s input port
Take PA2S as example, here is the connection diagram:
The input port should be connected to a dry contact of push button. Wet contact might damage
the input port.
And here is a list on the numbers of input port for different model:
Model
I10 series
I12
I16V
I18S
I16S
I16SV
PA2S
Input port
number
1
2
2
1
2
2
1
2.2.Configure the device
Step1. Open web browser and input device’s IP address in browser;
Step2. Input web login username and password;

Fanvil Technology Co. Ltd
Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China
Tel: [phone] Email: [email protected] [email protected] Official Web:www.fanvil.com
Step3. Go to Security Settings –Select: Dss Key –Select an option (“DSSKEY1”)
Step4. Go to Function Key
4.1. Select Dss Key 1
4.2 Type = Memory Key

Fanvil Technology Co. Ltd
Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China
Tel: [phone] Email: [email protected] [email protected] Official Web:www.fanvil.com
4.3 Name = Your Function
4.4 Value = SIP Extension
4.5 Subtype = Speed Dial
4.6 Line = Select the line available for perform a call