Bracket desktop installation
Connecting to the device
Please connect power adapter, network, PC, handset, and headset to
the corresponding ports as described in below picture.
①USB port: connect USB device (USB flash drive, WIFI adapter)
②Power port: connect the power adapter.
③Network port: connecting local area network or internet.
④PC port: the network port connect to the computer.
⑤Headset port: connect headset.
⑥Handset port: connect IP Phone handset.
Configuration via Phone
1．Press Menu > Advanced (Default password 123)
2．Select Network: To configure the Network Settings
(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE)
3．Select Accounts: To configure enable the account, fill the SIP
server address, port, user name, password etc.
Configuration via Web
1. Get the IP address from the phone: Press key, or Menu >
Status > IP.
2. Login: Input the IP address in the web browser. The PC and phone
should be in the same IP address segment(The default username
and password are both ‘admin’.)
3. Configure: Select network/Account, etc. And fill the relevant
content.
1．Press Menu key > Basic > Language.
2．Select the desired language and press OK soft key.
1．Pre-dialing: enter the phone number and pick up the handset.
2．Direct dialing: lift the handset and enter the phone number.
3．Handsfree: enter phone number and press or vice versa.
4．Headset: enter phone number and press or vice versa.
5．Designated line: press line key, enter phone number and press
dial key.
1．With the handset: pick up the handset.
2．With a headset: press .
3．With the handsfree: press .
1．Press key or Hold soft key, caller is put on hold.
2．To retrieve the call press key or Resume soft key.
Note: with more than one active call, select desired call with the
navigator keys and use the corresponding soft key to hold or resume.
1．Once in line with 1st caller, press conference soft key, 1st caller is
put on hold.
2．Then call the 2nd number.
3．After, 2nd call is established, press conference soft key to set up
the conference.
Attended transfer:
1．Press Xfer soft key during the active conversation, the call is put
on hold.
2．Dial the second telephone number.
3．When the call is answered, then press Xfer soft key to complete
the operation.
Blind transfer:
1．Press Xfer soft key during the active conversation, the call will be
on hold.
2．Then enter the 2nd telephone number and press Xfer soft key.
1．Press Menu > Features > Call Forward.
2．Select the line, the type of forward, enter the destination number
and status and press OK.
