Fein WSG 12-125 Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
November 24, 2003
Angle Grinder
WSG 12-125 / WSG 12-150

FEIN Power Tools
WSG 12-125/WSG 12-150 Parts List
Item Item Number Description Reqd
10 3-24-31-021-00-7 CLAMP CLAMPING PIECE 1
20 4-30-70-001-00-6 SCREW 2
30 3-24-31-040-00-6 STRAIN RELIEF 1
40 3-07-62-216-99-6 ELECTRONIC (110V) 1
50 4-17-01-001-17-2 BALL BEARING 1
60 3-07-12-088-01-3 BRUSH HOLDER 2
70 3-07-11-132-00-3 CARBON BRUSH 2
80 4-30-70-018-00-9 SCREW 2
90 3-19-01-114-01-4 MOTOR HOUSING 1
100 5-3-273-001-11-7 ARMATURE (110V) 1
110 3-14-28-118-00-7 AIR CONDUCTING RING 1
120 3-24-16-098-00-5 COVER PLATE 1
140 4-30-70-007-00-2 SCREW 4
200,210 3-12-06-110-01-5 GEAR HOUSING 1
210 4-17-05-019-00-1 NEEDLE BEARING 1
220 3-09-01-032-00-3 SPRING 1
230 3-02-17-327-00-3 RETENTION PIN 1
240 4-06-12-137-00-8 SEALING RING 1
250 3-28-05-185-00-2 RETENTION BUTTON 1
260 3-24-19-115-00-6 BEARING PLATE 1
270 3-34-06-285-00-3 DRIVE SHAFT (5/8 X 11) 1
280 4-17-01-010-05-4 BALL BEARING 1
290 3-24-16-101-00-9 COVER PLATE 1
300,310 3-38-09-229-01-2 BEVEL GEAR (9/44T) 1
320 3-26-24-117-00-9 WASHER 1
330 4-24-43-003-04-3 SECURING DISC 4
340 4-30-41-023-04-6 SCREW 4
370 6-38-01-095-00-8 WHEEL FLANGE (INNER) 1
380 6-38-02-098-00-7 WHEEL FLANGE (OUTER) 1
450 4-17-01-007-03-8 BALL BEARING 1
480 3-28-05-156-00-8 SLIDING SWITCH 1
490 5-1-273-001-11-5 FIELD COIL (110V) 1
500 4-30-70-017-00-1 SCREW 2
510 3-28-16-055-00-0 SWITCH BAR 1
520 3-28-16-052-00-4 SWITCH ROD 1
530 4-30-03-013-99-1 SCREW 2
540 3-07-01-218-00-3 ON/OFF SWITCH 1
550 3-12-01-100-00-9 COVER 1
560 3-14-15-082-00-4 BOLSTER 1
570 3-14-13-007-00-7 PROTECTIVE SLEEVE 1
580 3-07-05-035-01-3 CABLE 1
600 3-14-28-125-00-1 HOOD 1
610 4-30-64-020-04-9 SCREW 2
Accessories
590 3-21-19-107-01-6 SIDE HANDLE 1
390 3-18-10-241-01-3 5" GUARD 1
3-18-10-243-01-0 6" GUARD 1