Felton ODYSSEY II O2HSKC User manual

INSTALLATION GUIDE
ODYSSEY II HAND SHOWER KIT O2HSKC
CONVERSION FROM EXISTING FELTONMIX WALLSET
1.
2.
3.
Remove the shower head from the existing Feltonmix wallset by gripping the shower head stem and turning
it anti-clockwise.
Screw the elbow end with the black ‘o-ring’ into the wallset. The plastic flange provided will not be needed
for this conversion.
For Mains Pressure, fit flow restrictor into the handpiece first.
Screw the hose onto the elbow and handpiece and attach the handpiece to the bracket

At no stage should plated surfaces be cleaned with cleaning agents that contain a corrosive acid or a scouring additive. Plated
surfaces should be cleaned with liquid detergent or soap and water. Any damage caused through the use of an unsuitable cleaner
will not be covered by warranty. This warranty is subject to any other rights or remedies that you may have under the Consumer
Guarantees Act 1993 (or any other applicable legislation) and to Felton’s Terms of Trade.
Please fill in the details below, attach your receipt to this installation guide and keep as your proof of purchase.
Purchased at: ......................................................................................................................................................................................................................................................................
Date of purchase: ..............................................................................................................................................................................................................................................................
Installed by: ..........................................................................................................................................................................................................................................................................
Warranty, Maintenance and Care YOUR COPY TO KEEP
Felton Industries Limited guarantees these mixers to be free from defects in materials and workmanship for a period of five (5) years from the date
of purchase. This warranty is eective for 5 years from the date of purchase and covers supply of replacement parts only, not including installation.
You must retain proof of purchase of the Mixer (such as an invoice or receipt) and provide this to Felton on request. This warranty is for
manufacturing defects only and does not cover any damage to product due to abuse, negligence or improper installation. This warranty is given
on the understanding that the product is installed and operated according to Felton’s installation guide and the Australian/New Zealand standard
AS/NZS3500. This warranty is provided to persons who are a “consumer” under the Consumer Guarantees Act 1993 only and for use in
domestic/residential dwellings only (not for commercial use).
For technical assistance please ring: 0800 743 358 or [phone]
Felton Industries Limited 8 Farmhouse Lane, Glen Innes, Auckland 1072 New Zealand www.felton.co.nz
110220JC