
Contentsand general instructions
III
FestoP.BE−CDVI−DN−EN en 0404NH
Contents
Designated use V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Target group VI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service VI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes on the use of this manual VI
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important user instructionsVII. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Installation 1−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 General notes on installation1−3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2Setting the CDVI−DN1−5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1 Removing and fitting the left−hand end plate1−5. . . . . . . . . . . . . . . . .
1.2.2Settingsof the DIL switches 1−7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3Connecting tothe field bus1−13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3.1 Field buscable 1−13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3.2Field busbaud rateand field buslength1−14. . . . . . . . . . . . . . . . . . . . .
1.3.3Power supply for the DeviceNet 1−15. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3.4 Pin assignment of the DeviceNet 1−16. . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3.5Connection example 1−17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3.6Bustermination withterminating resistors1−18. . . . . . . . . . . . . . . . . . .
1.4 Power supply 1−19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4.1 Calculating the current consumption 1−19. . . . . . . . . . . . . . . . . . . . . . . .
1.4.2Selecting the cable 1−20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4.3Selecting the power unit1−20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4.4 Connect the power supply of the valveterminal 1−21. . . . . . . . . . . . . . .
1.5Extending the CDVI 1−27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Commissioning 2−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1 Preparing the CDVI valveterminal for commissioning 2−3. . . . . . . . . . . . . . . . . .
2.1.1 Switching on the operating voltages 2−3. . . . . . . . . . . . . . . . . . . . . . . .
2.1.2Address assignment of the CDVI−DN2−4. . . . . . . . . . . . . . . . . . . . . . . .
2.2 Commissioning on the DeviceNet2−6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2.1 General information2−6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2.2Configuring DeviceNet slavefeatures (EDS) 2−7. . . . . . . . . . . . . . . . . .