Fisher-Price M9972 User manual

1
fisher-price.com
M9972
BLR91
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires three AA batteries (included) for operation.
Batteries included are for demonstration purposes only.
Tool required for battery replacement: Phillips screwdriver (not included).

2
Care
• Wipe this toy with a clean cloth
dampened with a mild soap and water
solution. Do not immerse this toy.
• This toy has no consumer serviceable
parts. Do not take this toy apart.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
©2013 Mattel. All Rights Reserved.
PRINTED IN CHINA M9972a-0921
Consumer Information

3
Battery Safety
Information
Battery
Replacement
• For longer life, use alkaline batteries.
• Locate the battery compartment on
the bottom of the toy. Loosen the
screws in the battery compartment
door with a Phillips screwdriver and
remove the door.
• Remove the exhausted batteries and
dispose of them properly.
• Insert three, new AA (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screws.
• If this toy begins to operate erratically
you may need to reset the electronics.
Slide the power/mode switch off and
then back on.
• When sounds or lights from this toy
become faint or stop, it’s time for an
adult to change the batteries.
In exceptional circumstances, batteries
may leak fluids that can cause a
chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose
of batteries safely. Do not dispose of
this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
1,5V x 3
AA (LR6)

4
Assembly for Stand & Cruise
Disassembly for Sit & Play
Store the legs in a safe
place for future use
(Stand & Cruise).
Pull each leg release
tab and remove the
legs from the table top.
Place the table
top face down
on a flat surface.
Insert the legs
into the sockets
in the table top.
Push to “snap”
each leg in place.
1
2

5
Press a button
Slide the mouse
back and forth in any
mode for opposites
and sound effects
Press a key
Press a button or
lift the handset
Turn a page
Lil Table, Big Fun!
• Slide the power/mode switch to:
Learning - Learn letters,
numbers, shapes and animals!
Bilingual - Learn in English and
Spanish!
Music - Listen to fun songs and
musical tunes!
Imagination - Listen to lots of
fun sounds!
OFF
• Slide the volume switch on the
bottom of the toy to low , medium
or high volume .

6
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void
the user’s authority to operate
the equipment.
Consumer Information
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
ICES-003
This Class B digital apparatus complies
with Canadian ICES-003. Operation is
subject to the following two conditions:
(1) this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada. L’utilisation de ce dispositif
est autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même
si ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.