Fisher-Price 75986 User manual

75986
BLR99
CDG30
FMY73
Please keep for future reference.
No adult assembly is required.
Actual product may appear different
than the photos shown.
fisher-price.com
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.

2
WARNING
Falls onto hard surfaces could result in head or other serious injuries:
• Never place over concrete, asphalt, wood, packed earth, grass, carpet, or
other hard surfaces.
• Always use the restraint system.
• Adult supervision required.
• Only for domestic use.
• Use only outdoors.
• For children 6 to 36 months. Maximum weight 44 lb (20 kg).
To prevent injury, make sure your child is dressed appropriately to avoid
potential hazards while using the swing:
• Your child should not wear loose clothing such as ponchos or scarves.
• Your child should wear well-fitting shoes.
• To prevent injury, instruct children:
• Do not walk close to, in front of, behind, or between moving items.
• Do not twist swing chains or ropes or loop them over the top support bar
since this may reduce the strength of the chain or rope.
• Avoid swinging empty seats.
• Do not use the swing in a manner other than intended.
• Do not stand in the swing.
• Do not get out of the swing while it is in motion.
• Always sit in the center of the swing so that the child’s full weight is on
the seat.
To prevent serious injury:
• Do not allow use of this swing until it has been properly installed by an
adult, according to these instructions.
©2017 Mattel. All Rights Reserved.
PRINTED IN MEXICO 75986-0971-DOM

3
Placement and Play Area Surfacing
Before installing the swing, select and prepare a play area.
Select Protective Surfacing
One of the most important things you can do to reduce the likelihood of serious head injuries
is to install shock-absorbing protective surfacing under and around your play equipment.
The protective surfacing should be applied to a depth that is suitable for the equipment height
in accordance with ASTM F1292. There are different types of surfacing to choose from;
whichever product you select, follow these guidelines:
NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard
surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and
dirt are not considered protective surfacing because wear and environmental factors can reduce
their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective
surfacing. Ground level equipment - such as a sandbox, activity wall, playhouse or other
equipment that has no elevated play surface - does not need any protective surfacing.
Loose-Fill Materials
Maintain a minimum depth of 9 inches (22,86 cm) of loose-fill materials such as wood mulch/
chips, engineered wood fiber (EWF), or shredded/recycled rubber mulch for equipment up to
8 feet (2,44 m) high; and 9 inches (22,86 cm) of sand or pea gravel for equipment up to 5 feet
(1,52 m) high. NOTE: An initial fill level of 12 inches (30,48 cm) will compress to about a 9-inch
(22,86-cm) depth of surfacing over time. The surfacing will also compact, displace, and settle,
and should be periodically refilled to maintain at least a 9-inch (22,86-cm) depth.
Use a minimum of 6 inches (15,24 cm) of protective surfacing for play equipment less than 4 feet
(1,22 m) in height. If maintained properly, this should be adequate. (At depths less than 6 inches
(15,24 cm), the protective material is too easily displaced or compacted.)
Use containment, such as digging out around the perimeter and/or lining the perimeter with
landscape edging. Don’t forget to account for water drainage.
Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount
of loose-fill materials, mark the correct level on play equipment support posts. That way you can
easily see when to replenish and/or redistribute the surfacing.
Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.

4
Placement and Play Area Surfacing
6ft
(1,83 m)
6ft
(1,83 m)
Pivot Point
Use Zone
Pivot Point Distance
(maximum fall height
8 feet/2,44 m)
2
x
Pivot Point Distance
2
x
Pivot Point Distance
6ft
(1,83 m)
6ft
(1,83 m)
Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles
You may be interested in using surfacing other than loose-fill materials-like rubber tiles or
poured-in-place surfaces.
Installations of these surfaces generally require a professional and are not
“do-it-yourself” projects.
Review surface specifications before purchasing this type of surfacing. Ask the installer/
manufacturer for a report showing that the product has been tested to the following safety
standard: ASTM F1292 Standard Specification for Impact Attenuation of Surfacing Materials
within the Use Zone of Playground Equipment. This report should show the specific height for
which the surface is intended to protect against serious head injury. This height should be equal
to or greater than the fall height-vertical distance between a designated play surface (elevated
surface for standing, sitting, or climbing) and the protective surfacing below-of your play
equipment.
Check the protective surfacing frequently for wear.
Placement
Proper placement and maintenance of protective surfacing is essential. Be sure to:
Extend surfacing at least 6 feet (1,83 m) from the equipment in all directions.
For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal
to twice the height of the top bar from which the swing is suspended.

5
Installation
Periodically inspect S-hooks for wear. Metal to metal contact between hooks
may cause premature wear. If your swing set does not have a bushing, you
may want to replace the existing hook with a hook and bushing assembly
available at toy stores and home centers.
Swing Set Hooks
(not included)
S-Hook
(included)
Bushing
(not included)
ks
Cleaning
IMPORTANT! When installing this swing, be sure it is at least 6 feet 7 inches (2 meters) from
any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines
or electrical wires. The minimum clearance between the bottom of the seat and the ground is
13,8" (350 mm).
P
eriodically inspect S-hooks for wear. Metal to metal contact between hooks
may cause premature wear. If your swing set does not have a bushing, you
ma
y
want to re
pl
ace the existi
ng
hook with a hook and bushin
g
assemb
ly
available at toy stores and home centers
.
CAUTION
• Fasten the swing S-hooks (included) onto the hooks (not included) on your swing set.
• Wash the swing with a mild soap and water solution. Rinse with clean water to remove
soap residue.

6
Back View Side View
Groove Groove
Push
Push
Squeeze
Squeeze
Tab
Tab
Squeeze
Squeeze
Tab
Tab
Recline for Infant
Back View Side View
Groove
Groove
Squeeze
Squeeze
Tab
Tab
Squeeze
Squeeze
Tab
Tab
Lift
Upright for Toddler
• From the back of the swing, grasp the top edge of the swing. Squeeze the tabs and push the
top edge of the swing down.
• Make sure the tabs are completely in the upper grooves in the track, as shown.
• From the back of the swing, grasp the top edge of the swing. Squeeze the tabs while lifting the
top edge of the swing.
• Make sure the tabs are completely in the lower grooves in the track, as shown.

7
Crotch
Belt
Waist
Belt
Tray
Tab
Securing Your Child
Pull
Pull
Pull
is
t
t
y
Tray
Tab
T
T
T
T
T
T
T
T
T
Hint: If the swing appears to be crooked, simply pull either back rope up to straighten the swing.
• Locate the tray tabs under the armrests of the swing.
• Pull the tray tabs out and lift the tray slightly.
• Rotate the tray out of the way.
• Unbuckle the waist belts from the crotch belt.
• Place your child in the swing.
• Pull the crotch belt up between your child’s legs and fasten both waist belts to the crotch belt.
Make sure you hear a “snap” on both ends.
• Check to be sure the restraint system is securely attached by pulling it away from your child.
The restraint should remain attached.
• Tighten each waist belt so that the restraint system is snug against your child. Please refer to
the next section for instructions to tighten the waist belts.
• Rotate the tray back into place and push down on it to “snap” it into place. Pull up on the tray
to be sure it is securely latched.

8
Anchored End
Free End
ee
e
e
e
Free End
Anchored End
A
A
B
B
To Tighten To Loosen
Securing Your Child
Care
To tighten the waist belts:
• Feed the anchored end of the waist belt up through the buckle to form a loop A. Pull the free
end of the waist belt B.
• Repeat this procedure to tighten the other waist belt.
To loosen the waist belts:
• Feed the free end of the waist belt up through the buckle to form a loop A. Enlarge the loop by
pulling on the end of the loop toward the buckle.
• Pull the anchored end of the waist belt to shorten the free end of the waist belt B.
• Repeat this procedure to loosen the other waist belt.
Note: After adjusting the belts to fit your child, make sure you pull on them to be sure they are
securely fastened.
At the beginning of each play season and every two weeks during play season:
• Check all hardware.
• Check all moving parts including swing seat, ropes, cables, and chains for wear, rust, or other
deterioration. Replace product as needed.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as necessary.
At the end of each play season or when the temperature drops below 32 °F (0° C).
• Remove swing and take indoors and do not use.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as necessary.