Fisher-Price BHJ28 User manual

• Please keep this instruction sheet
for future reference, as it contains
important information.
• Requires two AA batteries
(included) for operation.
• Batteries included are for
demonstration purposes only.
• Adult assembly is required for
battery replacement.Tools required:
Phillips screwdriver (not included).
• Actual product may appear different
than the photos shown.
fisher-price.com
To change modes, wait until
the music/sounds stop
and press the nose!
BHJ28
• The ball is machine washable.
First, remove the sound box inside
the soccer ball. Machine wash the
ball in cold water on the gentle cycle.
Do not use bleach. Tumble dry on low
heat. Do not immerse the sound box.
• After washing and drying is complete,
replace the sound box inside the
ball. Be sure that the sound box is
replaced properly.

1
2
3
Battery Replacement
For best performance, we recommend replacing the batteries that came with
this toy with two, new AA (LR6) alkaline batteries.
• Open the fasteners on the bottom
of the ball.
• Lift the fabric tab and remove the
sound box.
• Loosen the screws in the sound
box battery compartment door
with a Phillips screwdriver. Remove
the door. Remove the batteries and
dispose of them properly.
• Insert two, new AA (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screws.
Do not over-tighten.
Sound
Box
2

45
Battery Replacement
IMPORTANT! To ensure proper
function, follow this step carefully.
• Align the face on the sound box with
the face on the front of the ball. Fit
the sound box back inside the ball.
• Fold the fabric tab over the bottom
of the sound box Aand secure the
fasteners B.
• If this toy begins to operate
erratically, you may need to reset
the electronics. Slide the power/
volume switch off and then back on.
• When sounds from this toy become
faint or stop, it’s time for an adult to
change the batteries.
Faces
A
B
• Protect the environment
by not disposing of this
product with household
waste (2002/96/EC).
Check your local authority
for recycling advice and
facilities.
3
B

©2013 Mattel. All Rights Reserved.
PRINTED IN CHINA BHJ28pr-0920
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void
the user’s authority to operate the
equipment. This device complies with
Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
CO
N
SU
MER A
SS
I
S
TAN
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
ICES-003
• This Class B digital apparatus
complies with Canadian ICES-003.
• Operation is subject to the following
two conditions: (1) this device may
not cause harmful interference and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
NMB-003
• Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada.
• L’utilisation de ce dispositif est
autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter
tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible
de compromettre le fonctionnement
du dispositif.
Consumer Information

Battery Safety
Information
In exceptional circumstances,
batteries may leak fluids that
can cause a chemical burn injury
or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose
of batteries safely. Do not dispose of
this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery
terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Power/Volume
Switch
• Open the fasteners on the bottom
of the ball.
• Pull the sound box out and slide
the power/volume switch to ON
with low volume or ON with
high volume .
• Replace the sound box back inside
the ball.
Note: Make sure the face on the
sound box is aligned with the face
on the front of the ball.
5
1,5V x 2
AA (LR6)

3 Interactive Modes!
• Press the nose on the front of the ball
to choose a mode: Learning, Music
or Imagination.
It’s Learning Time! (Learning Mode)
Roll the ball for counting fun!
It’s Music Time! (Music Mode)
Roll the ball to hear fun songs and
silly sounds.
Let’s Play! (Imagination Mode)
Roll the ball for fun sounds!
Hint: The ball goes into sleep mode
after approximately 5 minutes of
inactivity. Press the nose on the ball to
wake it up.
• When you are finished playing with
the toy, open the fasteners and slide
the power switch OFF .
• If the mode (Learning or Music or
Imagination) does not switch after
pressing the nose on the ball, try
removing and replacing the sound
box inside the ball. Be sure the face
and speaker on the sound box are
aligned with the face on the ball.
6