Fisher-Price C6325 User manual

Please keep this instruction sheet
for future reference, as it contains
important information.
Requires three “AA” batteries (included).
Adult assembly is required for
battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).
www.fisher-price.com
C6325

1.5V x 3
“AA”(LR6)
Battery Safety Information
A plastic tab was attached to the toy for in-store demonstration
purposes. While the tab may have already been removed,
check the back of the toy to be sure. If the plastic tab is still
attached, open the fasteners on the back of the toy and
pull and remove the tab. Close the fasteners and throw
the plastic tab away.
Before Use
For best results, we recommend replacing the batteries
that came with this toy with three, new “AA” (LR6)
alkaline batteries.
• Open the fasteners on the back of the toy to access the
battery compartment.
• Loosen the screws in the battery compartment door with
a Phillips screwdriver. Remove the battery compartment
door. Throw the exhausted batteries away.
• Insert three, new “AA” (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries for longer
battery life.
• If the toy begins to operate erratically you may need to
reset the electronics. Slide the power/volume switch on
the back of the toy off and then back on.
• When sounds become faint or stop, it’s time for an adult
to change the batteries!
• Replace the battery compartment door and tighten the
screws with a Phillips screwdriver. Do not over-tighten.
• Close the fasteners on the toy.
• Protect the environment by not disposing of this
product with household waste (2002/96/EC).
Check your local authority for recycling advice
and facilities (Europe only).
Battery Replacement
Battery Compartment Door
Power/Volume
Switch
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your product.
To avoid battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
•
Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they are
only to be charged under adult supervision.

• Open the fasteners on the back of the toy and slide the power/volume to either on with low volume ; on with
high volume ; or off .
• Locate the mode select switch on puppy's right foot.
• Press the right foot to turn the toy on and start in learning mode. Press again for music mode. Press once more to
turn the toy off.
2 Interactive Play Modes!
Mode Select
Music Mode
• Press the puppy's left foot, right hand, heart, tummy or
left ear to hear it identified followed by a short ditty.
Press again to learn a color.
• Press the note button on the puppy's left hand to
hear fun learning songs.
• Press the puppy's left foot, left ear, heart or hands to hear
a fun song. Press again to hear a fun phrase.
• Press the puppy's tummy to hear another fun song.
Press again to hear the puppy giggle and bark.
Learning Mode

Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. C6325pr-0923
©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
Consumer Information
Care
• Wipe this toy with a clean cloth dampened with a mild
soap and water solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not
take this toy apart.
FCC Statement (United States Only)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Note: Changes or modifications not expressly approved
by the manufacturer responsible for compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.