Fisher-Price PLANET HEROES N4300 User manual

N4300
N4300
theplanetheroes.com
Please keep this instruction sheet for future
reference, as it contains important information.
Requires three “AA” (LR6) alkaline batteries
(not included).
Adult assembly is required.
Tool required for battery replacement: Phillips
screwdriver (not included).
Figure not included and sold separately.

Battery
Installation
• Locate the battery compartment on the bottom
of the toy.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert three “AA” (LR6) alkaline batteries.
Note: We recommend using alkaline batteries for
longer battery life.
• If this toy begins to operate erratically, you may
need to reset the electronics. Slide the power
switch off and then back on.
• When sounds from this toy become faint or
stop, it’s time for an adult to change
the batteries.
• Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities.
Power
Switch

Battery Safety
Information
In exceptional circumstances, batteries may
leak uids that can cause a chemical burn injury
or ruin your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of non-use.
Always remove exhausted batteries from the
toy. Dispose of batteries safely. Do not dispose
of the product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy
before charging.
• If removable, rechargeable batteries are used,
they are only to be charged under adult supervision.
1.5V x 3
“AA” (LR6)

Fisher-Price, Inc., a subsidiary of Mattel, Inc.,
East Aurora, NY 14052 U.S.A.
©2008 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA N4300a-0920

ASSEMBLY
• “Snap” the handle into the top of the jet,
as shown.
Note: The handle only fits one way. If it does not
seem to fit, turn it around and try again!
Handle
Cool Voices &
Sound Effects
• Slide the power switch on the bottom of the toy
to on l or off ¢.
• Press the buttons on of the side of the jet to hear
your mission along with cool engine and laser
sounds and favorite Planet Heroes®phrases!

• Press the button on the end of the handle to release
the landing gear for a safe landing.
• Fold the landing gear, as shown, for take off.
Take off & land

FCC Statement
(United States Only)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Note: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

ICES-003
This Class B digital apparatus complies with
Canadian ICES-003.
Operation is subject to the following two con-
ditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes: (1) il ne doit
pas produire de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est
susceptible de compromettre le fonctionnement
du dispositif.
Care
Wipe with a clean cloth dampened with a mild
soap and water solution. Do not immerse.