Fisher-Price Sweet Magic Kitchen 75423 User manual

Please keep this instruction sheet for future reference, as it contains important information.
Requires three "D" (LR20) alkaline batteries (not included).
Adult assembly is required.
Tool required for assembly: Long shaft Phillips screwdriver (not included).
75423
Instructions

2
Parts
CAUTION
This product contains small parts in its unassembled state.
Adult assembly is required.
Cooling
Drawer
#8 x 1/2" Screw – 24
Shown Actual Size
Parts Not Shown:
Label Sheet
2 Drinking Goblets
Mixing Bowl
Candle
2 Forks
Whisk
Mixing Spoon
Pot Holder
Cake Spatula
Egg
Cake Mix Box
Pitcher
Butterfly Cake
Topper
Color Change Cupcake Top
Cupcake Bottom
Color Change Pie Top
2 Plates
Pie Bottom
Color Change Cake
Color Change Cake Piece
Color Change Gingerbread Man
Color Change Pie
Color Change Chip Cookie
Color Change Heart Cookie
Faucet
Handle
Base
Front Panel
Back Panel
Side Panel with
Rectangular Opening
Side Panel with
Oval Openings
Counter Top
Pantry
Refrigerator Door
2 Shelves
Oven Rack
Serving
Tray
Sink
Faucet
2 Pantry Side
Shelves
Phone
2 Oven
Knobs
Oven
Dial Page
Icing
Bag
Oven Handle
Battery
Compartment
Door

3
Assembly
•Please wipe each part with a clean, dry cloth before assembly.
•Save all packaging material until assembly is complete to ensure that parts are not discarded.
•Fit the front panel to the back panel.
•Insert two screws through the back panel and into
the front panel. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
Front
Panel
2Tabs
Back
Panel
1
Oven Handle
•Fill the cooling drawer with tap water just below the top
of the tubes.
•Place the cooling drawer in your freezer. When the water
in the cooling drawer is frozen, you’re ready to bake.
Before First Use
The cooling drawer must be filled with water
and frozen. The drawer lets the kitchen "bake"
the color change treats.
Cooling
Drawer
•Open the oven door.
•Fit the oven handle to the oven door as shown.
•Insert two screws through the back of the oven door
and into the handle. Tighten with a Philips screwdriver.
Do not over-tighten.
3
•During the assembly you will be making two
electrical connections. Identify the two connectors
coming from the front panel.
Large Connector - Connects to the back panel in the
next step.
Small Connector - Connects to the counter top in
step 10.
Oven Door
Small
Connector
Large
Connector
Top View

4
Assembly
•Fit the side panel with the oval openings to the other
side of the main assembly. Make sure the pegs in the
side panel fit into the holes in the main assembly.
•Insert two screws through the side panel and into the
main assembly as shown. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
7
•Fit the side panel with the rectangular opening to
the main assembly. Make sure the pegs in the side
panel fit into the holes in the main assembly.
•Insert two screws through the side panel and into the
main assembly as shown. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
6
Side Panel
with Rectanglular
Opening
Peg
Hole
•Slide each shelf into the groove in each side panel.
5
Shelves
Groove
•Plug the large connector from the front panel into the
connector from the back panel as shown.
Connector from
Back Panel
4
Side Panel
with Oval
Openings Side Panel
with Rectanglular
Opening
Main
Assembly
Side Panel
with Oval
Openings Main
Assembly
Large Front
Panel Connector
Peg
Hole

5
Assembly
•Fit the counter top onto the main assembly.
•Insert 10 screws through the main assembly and into
the counter top. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
•Position the refrigerator door with the handles
facing you.
•At an angle, fit the refrigerator door lower peg into the
lower hole in the hinge on the side panel.
•Then, "snap" the refrigerator door upper peg into the
upper hole in the hinge.
•Place the base on a flat surface with the open side
facing up.
•Set the main assembly onto the base. Fit the tabs
on the bottom of the main assembly into the slots
in the base.
•Press down on the main assembly to "snap" it into
the base.
911
Tab Slot
•Position the counter top over the main assembly so
that the stove top is over the oven door.
•Plug the remaining small connector from the main
assembly into the connector from the counter top
as shown.
10
Stove Top
Counter Top
Oven Door
8
Base
Hinge
Connector from
Counter Top
Small Front
Panel Connector

6
Assembly
•Place the sink into the sink opening in the counter top.
•Fit the hole in the faucet over the post on the sink as
shown.
•Insert and "snap" the peg on the bottom of the faucet
handle into the faucet as shown.
15
Sink
Faucet
Handle
Faucet
Sink
Opening
•Fit the tab near the top of a side self into the upper
groove in the side of the pantry as shown.
•Press to "snap" the remaining tabs into place.
•Repeat this procedure to attach the other side shelf.
14
Side Shelf
Side Shelf
1
2
1
2
•Insert four screws through the grooves in the pantry
and into the counter top. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
•Position the pantry over the counter top as shown.
•Fit two large tabs on the pantry into the matching slots
in the counter top as shown.
•Gently press down on the top of the pantry to "snap"
it in place.
13
12
Back View
Tab
Pantry
Pantry
Grooves
Tab
Counter Top

7
Battery Installation
•Locate the battery compartment on the back of
the kitchen.
•Insert three "D" (LR20) alkaline batteries.
Hint: We recommend using alkaline batteries for
longer life.
•Fit the battery compartment door onto the battery
compartment. Tighten the screws in the battery
compartment door with a Phillips screwdriver. Do not
over-tighten.
•When lights, sounds or fan on this toy become faint or
stop, it’s time for an adult to change the batteries!
•Insert the peg on one end of the page into the top
hole in the "cookbook."
•Bend the page slightly and insert the bottom tab into
the hole at the bottom of the cookbook.
•Insert and "snap" the oven dial into the center hole in
the counter top.
•Insert and "snap" the oven knobs into the holes on
either side of the oven dial.
•Open the oven door and slide the oven rack into
the grooves inside the oven.
17
16
Peg
Battery
Compartment
Door
1.5 V x 3
"D" (LR20)
Battery Safety Information
Batteries may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid battery leak-
age:
•Do not mix old and new batteries or batteries of differ-
ent types: alkaline, standard (carbon-zinc) or recharge-
able (nickel-cadmium).
•Insert batteries as indicated inside the battery compart-
ment.
•Remove batteries during long periods of non-use.
Always remove exhausted batteries from the product.
Dispose of batteries safely. Do not dispose of batteries
in a fire. The batteries may explode or leak.
•Never short-circuit the battery terminals.
•Use only batteries of the same or equivalent type,
as recommended.
•Do not charge non-rechargeable batteries.
•Remove rechargeable batteries from the product
before charging.
•If removable, rechargeable batteries are used, they are
only to be charged under adult supervision.
Oven Dial
Oven
Knobs
Cookbook
Page
Shown Actual Size
Peg
Assembly
Oven Rack

8
Label Decoration
Proper label application will help keep labels looking their best!
When applying labels, keep the following guidelines in mind:
•Wash hands before applying labels.
•Before applying labels, wipe the surface of the toy with a clean, dry cloth to remove dust or oils.
•For best results, avoid repositioning a label once it has been applied.
•Apply labels as shown in the illustration.
One time assembly is now complete.
2
4
6
7
3
1
5

9
Let’s Get Cooking
•When you are ready to play, remove the cooling drawer
from your freezer. For best results, be sure it is
completely frozen.
•Slide the cooling drawer into the grooves near the top of
the oven as shown.
•Turn the oven dial to turn start "baking."
•Lights flash and music plays as the treat "bakes."
•When the treat is ready (about a minute) the music
stops and you’ll hear a "ding."
•Open the oven and remove your treat. Colored
decorations appear on the treat!
How it works: A fan blows cold air from the cooling
drawer onto the treat and causes it to change color!
•Choose a color change treat you want to bake.
•Place the treat on the serving tray. Set the tray on the
oven rack with the treat directly under the cooling
drawer.
Hint: For best performance, be sure the oven rack is
placed in the grooves that position the treat as close as
possible to the cooling drawer.
Cooling
Drawer
2
4
3
Serving
Tray
Oven Dial
Grooves
Oven
Rack
Top View
•Locate the power/volume switch on the back of
the kitchen.
•Slide the power/volume switch to either on with no
music ; on with low volume ; or on with high
volume .
•Slide the switch to off position when the toy is not
in use.
Power/Volume Switch
1

10
More Decorating Fun Helpful Hints
•Place an ice cube into one of the small bins on either
side of the cookbook.
•Dip the icing bag into melted ice water and dab treats to
change color.
•Keep the cooling drawer frozen so it’s always
ready to go.
•The color change feature works best at a room
temperature of 68˚ - 74˚ F.
•As the treats warm back up, the color change
gradually disappears. "Bake" the treats again to
change them back.
•In colder rooms, some color change decorations may
not disappear completely. Try warming them by running
them under warm water.
•The color change feature lasts longer if you do not
expose this toy to intense heat or direct sunlight for
prolonged periods of time.
•As the ice melts in the cooling drawer, color changing
will be less visible. Refreeze the cooling drawer.
•When battery power is low, the fan will slow down and
color changing will be less visible. Replace the batteries
with fresh alkaline batteries as described in the battery
installation section.