Fisher-Price Baseball toys User manual

Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tool needed for assembly: Phillips Screwdriver (not included).
Requires four “D” (LR20) alkaline batteries (not included) for operation.
www.fisher-price.com

2
WARNING
To prevent injury from balls and moving parts:
• Keep face, head and hands away from the ball release.
• Use only the balls included.
• Never put other objects in the ball chute.
CAUTION
This product contains small parts in its unassembled state.
Adult assembly is required.
Consumer Information
CO
N
S
UMER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.

3
Parts
3 Balls
Bat
Ball Chute
(2 Pieces)
Motor
Cover
Base
SHOWN ACTUAL SIZE
Note: Tighten and loosen
all screws with a
Phillips Screwdriver.
Do not over-tighten the screws.
#6 x 1/2" (1,3 cm) Screws - 4

4
Assembly
Motor
Ball Chute
• Insert and snap the tabs into the slots in
the ball chute pieces.
• Insert two screws into the pegs at the top
of the ball chute and tighten.
Tabs
Slots
• At an angle, insert the closed peg on the
motor into the hole in the base.
• Align the tabs at the bottom of the ball
chute with the grooves in the opening of
the motor.
• Turn the ball chute clockwise to lock it
into position. Pull up on the ball chute to
be sure it is secure.
Base Hole
Closed
Peg
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA B6312b-0920
1
2
3
4

5
Battery Installation
• Lower the motor so that the open peg fits
into the groove in the base.
• Insert the battery plug into the socket in
the motor, as shown.
Hint: If there isn’t a socket inside the peg,
you positioned the motor/chute assembly
backwards in the base. Remove the motor/
chute assembly and turn it around. Repeat
assembly step 4.
• Fit the cover over the peg and plug and
into the base.
• Insert two screws into the cover and tighten.
Socket
Plug
Groove
Cover
Peg
Plug
• Loosen the screws in the battery
compartment door and remove the
battery compartment door.
• Insert four "D" (LR20) alkaline batteries
into the battery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screws.
• When ball release distance is greatly
reduced or if the time between ball
releases is long, it’s time for an adult to
replace the batteries!
• If this product begins to operate erratically,
you may need to reset the electronics.
Slide the power switch off and then
back on.
Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority
for recycling advice and facilities
(Europe only).
1,5V x 4
"D" (LR20)
Battery Compartment
Assembly
5
6

6
Battery Safety
Information
Hit from the tee!
• Position the ball chute completely upright.
• Place the ball on top of the ball chute.
• Your little player can hit the ball off the “tee”.
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Beginner
Batting Practice Tips
• We recommend using this toy outdoors,
on a non-paved surface, such as grass
or sand. Do not use outdoors when it is
raining or there is wet grass. The balls
will not launch properly.
• When your child is batting, be sure there
are no other children in or around the
batting area, including directly in front of
the unit.
Power
Switch
Automatic
Ball Button

7
Balls pop up automatically to hit.
• Push the ball chute all the way back.
• Load the balls into the side of the ball chute.
• Locate the power switch on the top of the
motor. Slide the power switch on .
• Press the automatic ball button and
get ready.
• Stand about two feet to the side of the base.
• Hit the ball when it pops up!
Hit the pitched ball from up to 10 feet away!
• Position the ball chute completely upright.
• Load the balls into the side of the ball chute.
• Locate the power switch on the top of
the motor. Slide the power switch on .
• Press the automatic ball button and
get ready.
• Stand up to 10 feet away from the front of
the base.
• Watch the pitch and hit a home run!
Hint: After pressing the automatic ball button, the motor shoots three balls and automatically
turns off. Load the balls into the side of the ball chute and press the automatic ball button to
shoot the balls again!
Rookie Pro
• This toy is designed for use with foam
balls and plastic bat (both included).
It is not designed for use with wooden
or metal bats, or regulation baseballs or
softballs. Use of these balls and bats may
damage this toy.
• Hold the bat with hands together, about
one or two inches from the knob at the
end of the bat.
- Right handed batters should have the
right hand on top of the left hand.
- Left handed batters should have the left
hand on top of the right hand.
• Stand with feet about shoulder
width apart.
• When hitting from the “tee” or pop-up,
stand close enough to hit the ball
comfortably. Look at the ball and swing
with a smooth and level motion.
• When hitting a pitched ball, stand no
further than 10 feet from the unit.
• Keep your eyes on the ball as it pops-up
or as it is being pitched.
• Swing with a smooth and level motion.

8
Consumer Information
Storage
• Load the balls into the side of the ball chute.
• Fit the bat in the circular opening in the base.
Care
• Do not leave this product outdoors. Store
this product indoors when not in use.
• This product may be wiped clean using a
mild cleaning solution and a damp cloth.
Do not use bleach. Do not use harsh or
abrasive cleaners. Rinse clean with water
to remove residue. Do not immerse
this product.
• Periodically inspect this product for wear
and damage and replace any cracked parts.
FCC Statement (United States Only)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
ICES-003
• This Class B digital apparatus complies
with Canadian ICES-003.
• Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
NMB-003
• Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
• L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement
du dispositif.