Fisher-Price Voice Tech Rescue Heroes Aquatic Rescue Command Center... User manual

Figures sold separately and subject to availability.
This toy is not designed for use in water.
Model Number 78157
Please keep this instruction sheet for
future reference, as it contains important
information. Adult assembly is required.
Aquatic Rescue
Command Center
Aquatic Rescue
Command Center™

Parts
This product contains small parts in its unassembled state.
Adult assembly is required.
Base
Bow Deck
Stern Deck
Deck
Support G
Deck
Support A Deck
Support B
Deck
Support E Deck
Support F
Deck
Support C
Deck
Support D
Map
Propeller
Midship Deck
Wheelhouse
CAUTION
Boat Hook
2
Not shown: Label Sheet

Elevator
Column
Elevator
Platform
Medical Platform
Rescue
Launcher
Fuel Hose
Buoy
Life
Preserver
Rescue Platform
Anchor
Repair Wrench
3 Voice Tech™
Video Cards
Docking Bay
Door
Message Center
Landing Pad
Search Light
2 Video
Screen Doors
Crane Arm
Parts
Wheelhouse Roof
Crane Base
3
Whale
Rescue Platform
Support
Flag

Battery Installation
Reqiures four “C” (LR14) alkaline batteries for operation
(not included). Tool required for battery installation:
Phillips screwdriver (not included).
• Locate the battery compartment door on the back of the
message center.
• Loosen the screw in the battery compartment door with
a Phillips screwdriver.
• Remove the battery compartment door.
• Insert four “C” (LR14) alkaline batteries, as indicated
inside the battery compartment.
• Fit the tab on the battery compartment door into the slot in
the battery compartment. Close the battery compartment
door and tighten the screw with a Phillips screwdriver.
Do not over-tighten.
Hint: We recommend using alkaline batteries for longer
battery life.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove exhausted batteries from
the toy. Battery leakage and corrosion can damage this toy. Dispose of batteries safely.
• Do not dispose of batteries in a fire. The batteries may explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the "Battery Installation"
instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before they are charged.
• If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure
and other parts. Do not use a damaged battery charger until it has been properly repaired.
1.5V x 4
“C” (LR14)
Shown Actual Size
4
Message
Center

Building the
Aquatic Rescue Command Center™
• Locate deck supports A and B.
Note the markings on the supports.
• Insert the pegs on each end of the
map into the holes on the inside of
deck support A and deck support B.
Hint: You will need to hold these parts
together, then proceed to the next step.
• With the base on a flat surface,
note the A and B markings in the
square slots.
• Insert and “snap” deck support
A and deck support B into the
matching base slots marked A
and B.
• Pull up on each support to be
sure each is secure in the base.
1
2
5
Map
A
B
B
A
Map
Base

Building the
Aquatic Rescue Command Center™
• Locate deck supports C, D, E, F,
and G. Note the markings on the
supports.
• Insert and “snap” deck supports
C, D, E, F and G into the
matching base slots.
• Pull up on each support to be
sure each is secure in the base.
• Place the peg on the right side
of the medical platform into the
hole in deck support G. Fit the
other medical platform peg into
the slot in deck support F.
• Place the peg on the right side
of the docking bay door into the
hole in deck support F. Fit the
other docking bay door peg into
the slot in deck support E.
• Position the boat hook so that
it curves up. Insert and “snap”
the tab on the boat hook into
the slot on the side
of deck support G.
3
4
6
C
D
E
G
F
E
G
F
Boat
Hook
Docking
Bay Door
Medical Platform

Building the
Aquatic Rescue Command Center™
• Place the stern deck on top of
deck support G so that the tab
on the top of the boat hook fits
into the slot on the stern deck.
• Push down on the stern deck
until you hear the boat hook tab
“snap” in place.
• Pull up on the stern deck to be
sure it is secure.
• Place the midship deck on top
of deck supports A, B, C, F
and G. Fit the tabs on top of
the deck supports into the
eight slots in the midship deck.
• Push down on the midship
deck near each slot to
“snap” the tabs in place.
Hint: It may be easier to “snap”
each tab in place if you hold the
deck support with one hand while
pushing down near the midship
deck slot with the other hand.
• Pull up on the midship deck to
be sure it is secure.
5
6
7
Boat
Hook
Midship
Deck
Stern
Deck
G
B
A
C
F
G

Building the
Aquatic Rescue Command Center™
• Place the bow deck on top of deck
supports C, D, E and F so that the
tabs on the top of supports fit into
the six slots on the bow deck.
• Push down on the bow deck near
each slot to “snap” the tabs in place.
Hint: It may be easier to “snap”
each tab in place if you hold the deck
support with one hand while pushing
down near the bow deck slot with the
other hand.
• Pull up on the bow deck to be sure
it is secure.
•“Snap” the propeller onto the peg
at the rear of the base.
• Position the elevator column
with the ribbed side facing you.
• Position the elevator platform
with the detailed side facing up.
• Tip the elevator platform to fit
the tab through the slot in the
elevator column.
• Turn the elevator platform so
that the detail side faces up.
The elevator platform should
now stay in place within the
elevator column.
7
8
Bow Deck
Propeller
E
D
F
C
8
Elevator
Column
Elevator
Platform

Building the
Aquatic Rescue Command Center™
• Locate one of the video
screen doors.
• Fit the lower peg on the door
into the lower hole in the
message center as shown.
• Bend the door slightly to fit the
other peg into the upper hole in
the message center.
• Repeat this procedure to attach
the other video screen door to
the message center.
• With the message center video screen
facing the deck, fit it into the raised console.
• Push down on the message center so both
tabs "snap" in place in the raised console.
• Pull up on the message center to be sure it
is secure.
9
10
Message
Center
Video
Screen
Door
Video
Screen
Door
Message
Center
Raised
Console • Slide the backpack
reader onto the
connector on the
raised console.
The backpack
reader stores here
when not in use.
9
Backpack
Reader
Connector
Connector

Building the
Aquatic Rescue Command Center™
11
12
• Fit the tabs on the bottom of
the wheelhouse into the slots in
the deck.
• Push down on the wheelhouse so
that its tabs "snap" in place.
• Pull up on the wheelhouse to be
sure it is secure.
• Position the slots in the wheelhouse
roof over the tabs on top of the
wheelhouse.
• Push down on the roof so that it
"snaps" in place on the
wheelhouse.
• Fit the slots on the landing pad
onto the tabs on the message
center and elevator.
• Push down on the landing pad
near each slot to "snap" the
tabs in place.
• Pull up on the landing pad to be
sure it is secure.
10
Wheelhouse
Roof
Message
Center
Wheelhouse
Landing Pad
Message
Center
Elevator