FRAME IT ALL 800001076 User manual

800001076/800002076/800003076/800004076
800001077/800002077/800003077/800004077
800001078/800002078/800003078/800004078
800001079/800002079/800003078/800004079
RAISED GARDEN BED
LAZY CURVE
Layout your timbers along the borderline and connect each timber together by inserting
the top of the stake through the bracket loops with the stake pointing to the sky. This
enables you to freely position your border to get your desired location.
Customer Service: 1800-914-9835 |
[email protected]m
© Frame It All. All Rights Reserved.
1 LEVEL KIT CONTAINS:
•Composite straight boards 4’ x 2
•Composite boards curved 4’ x 6
•Stacking Brackets x 16
•Stacking Stakes x 8
•Plugs x 32
•Caps x 8
3 LEVELS
ASSEMBLY INSTRUCTIONS
STEP 1a:
Assemble the timbers by sliding one end of timber into channel end
of one of the brackets. Use plugs to cover the holes on both sides to
lock the bracket in place.
Repeat this process on the opposite end of the timber flipping the bracket in the opposite
direction (see image). Bracket 2 x straight boards
in this way.
How the Joints Work
Use plugs (included)
to cover the holes on
both side of timbers
4 LEVELS
STEP 2:
Layout the base level of your raised garden in the wavy shape below, using 2 x 4’ straight
& 6 x 4’ curved timbers. Insert stake through the hole of the bracket and into each of the
corners to lock all sides in place.
STEP 2a:
For one level, add caps to each of the top corner joints to finish off the raised garden.
HAPPY GARDENING!
FOR INDOOR & HARD SURFACE:
If you plan to assemble raised bed on a hard surface, use
hacksaw to remove the spike of each stake. Use these cut
down stakes for the base level only of your raised garden.
Trim stake spike with
hacksawfor use indoor
or on hard surfaces
Use plugs to
cover the holes
–two plugs are
required per
bracket (1 on
each side)
Use a Capto
complete the
top level.
Use stacking
stakes for
ground level
framesand
stacking
additional levels.
Use stacking
stake when
creating a
multi-level
Stacking stake fit
into the tops other
Stacking stakes
2 LEVEL KIT CONTAINS:
•Composite straight boards 4’ x 6
•Composite boards curved 4’ x 12
•Stacking Brackets x 28
•4-way Brackets x 8
•Stacking Stakes x 16
•Plugs x 72
•Caps x 8
3 LEVEL KIT CONTAINS:
•Composite straight boards 4’ x 8
•Composite boards curved 4’ x 18
•Stacking Brackets x 44
•4-way Brackets x 8
•Stacking Stakes x 24
•Plugs x 104
•Caps x 8
4 LEVEL KIT CONTAINS:
•Composite straight boards 4’ x 12
•Composite boards curved 4’ x 24
•Stacking Brackets x 56
•4-way Brackets x 16
•Stacking Stakes x 24
•Plugs x 144
•Caps x 8
STEP 1b:
Connect 3 curved boards with the bracket
orientation A for the outward-curving sections
and 3 curved boards with orientation B for
the inward-curving sections.

STEP 3:
For level 2, connect 6 curved boards and 4 straight boards in the following
patterns and quantities.
Connect 1x curved board with stacking
brackets on both sides
Connect 1 x curved board with stacking
brackets on both sides
Connect 1x curved board with a stacking
bracket on one end and a mid-section
4-way bracket on the other end
Connect 1x curved board with a stacking
bracket on one end and a mid-section
4-way bracket on the other end
Connect 1x curved board with a stacking
bracket on one end and a mid-section
4-way bracket on the other end
Connect 1x curved board with a stacking
bracket on one end and a mid-section
4-way bracket on the other end
Connect 2x straight boards with stacking
brackets on both sides
Connect 2x straight board with top 4-way
brackets on both sides
C
D
STEP 4:
Layout the boards for the second level flat on the ground while referencing the diagram
below. Place the cross board for level 2 on top of the upside stakes to ensure it will fit.
Once adjustments have been made, the stakes can be hammered into the ground and
the second level can be stacked.
A
B
E
H
E
F
C
D
H
STEP 5:
Connect 6 curved boards and 2 straight boards for level 3 with
stacking brackets on both ends and stack them as you did for
level 1.
2 x cross board
for a 3-level design.
3 LEVELS
4 LEVELS
Note: Stacking stakes insert into the top of the previous level stakes.
STEP 6:
Connect 10 boards for level 4 in the same quantity and pattern as
you did for level 2. Stack and connect them in the same way as
well. (Repeat steps 3 & 4)
4 x cross
boards on a
4-level design.