Front Runner BGTH002 User manual

BGTH002_REV_A00 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
toyota hilux/fortuner (2016 - current )
Belly GUARD
BGTH002
ENG
1
45 min
IMPORTANT WARNING!
Thank you for purchasing a Front Runner Belly Guard.
Before you start, take a moment to familiarize yourself with this Fitting Intruction and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE. CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.

BGTH002_REV_A00 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS 2
TOOLS NEEDED
REAR OF VEHICLE
FRONT OF VEHICLE
1 1 X Belly Guard
2 1 X Channel Nut With Wire
3 2 X Flat Washer M8x19x3
4 2 X Spring Washer M8
5 2 X Button Head M8x25
IN THE BOX
FIGURE 1.1
2
1
3
4
3
4
5
5
GET ORGANIZED
1
Here is what you are looking at for BGTH002
5MM

BGTH002_REV_A00 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS 3
FIT AND SECURE
2
FRONT OF VEHICLE
Loosen and remove the two bolts and
washers shown.
Slide the belly guard between the
gearbox guard and the chassis. Align the
holes and refit the two bolts and washer
that you removed. Fit the two bolts and
washers on the rear cross member.
See diagram 1.1
2.1
COMPLETION
3
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
9
3.1
Congratulations. You did it. Take a step back and admire your work!
5MM
Rear Cross Member
Tightening Torque 40Nm