Fujitsu Primergy RX300 S3 Owner's manual

PRIMERGY RX300 S3
Service Supplement
Edition June 2007

Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
[email protected].
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: P:\RX300S3\RX300_S3_SS_bearbMoni\RX300S3_2x6HDD_ss_en\rx300s3-ss-e.vor
Copyright © 2007 Fujitsu Siemens Computers GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.

RX300 S3 Service Supplement
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Overview of the documentation . . . . . . . . . . . . . . . . . 5
1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 8
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17
4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 17
4.2 Replacing the operating panel . . . . . . . . . . . . . . . . 17
4.3 Replacing USB module . . . . . . . . . . . . . . . . . . . . 20
4.4 Replacing the Power backplane . . . . . . . . . . . . . . . . 23
4.5 Replacing the hot-plug PCI board . . . . . . . . . . . . . . . 25
4.5.1 Removing a defective hot-plug PCI board . . . . . . . . . . . . 25
4.5.2 Installing a new hot-plug PCI board . . . . . . . . . . . . . . . 27
4.6 Replacing the SAS backplane/expander board . . . . . . . 29
4.7 Replacing the HDD card . . . . . . . . . . . . . . . . . . . . 32
4.7.1 Removing the 2.5“ HDD cage . . . . . . . . . . . . . . . . . . 32
4.7.2 Replacing the HDD backplane . . . . . . . . . . . . . . . . . . 34
4.7.2.1 Removing the cards . . . . . . . . . . . . . . . . . . . . . 34
4.7.2.2 Installing the cards . . . . . . . . . . . . . . . . . . . . . . 35
4.7.3 Installing the 2.5“ HDD cage . . . . . . . . . . . . . . . . . . . 37
4.8 Fan box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4.8.1 Removing the fan box . . . . . . . . . . . . . . . . . . . . . . 38
4.8.2 Installing the fan box . . . . . . . . . . . . . . . . . . . . . . . 41
4.9 Replacing the IDTemp Combo . . . . . . . . . . . . . . . . . 43
4.10 Replacing the system board . . . . . . . . . . . . . . . . . . 46

© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: P:\RX300S3\RX300_S3_SS_bearbMoni\RX300S3_2x6HDD_ss_en\rx300s3-ss-e.ivz
5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
5.1 Board layouts . . . . . . . . . . . . . . . . . . . . . . . . . . 51
5.1.1 Operating panel . . . . . . . . . . . . . . . . . . . . . . . . . . 51
5.1.2 USB panel board . . . . . . . . . . . . . . . . . . . . . . . . . 51
5.1.3 Power Backplane . . . . . . . . . . . . . . . . . . . . . . . . . 52
5.1.4 SAS Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5.1.4.1 Backplane for 3.5“ HDDs . . . . . . . . . . . . . . . . . . . 53
5.1.4.2 Backplane for 2.5“ HDDs . . . . . . . . . . . . . . . . . . . 54
5.1.5 Connector card . . . . . . . . . . . . . . . . . . . . . . . . . . 55
5.1.6 HDD backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 55
5.1.7 IDTemp Combo . . . . . . . . . . . . . . . . . . . . . . . . . . 56
5.1.8 System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

RX300 S3 Service Supplement 5
1 Introduction
The PRIMERGY RX300 S3 Server is an Intel-based server for medium-sized
networks and large companies. The server is suitable for use as a file server as
well as an application, information, or Internet server.
1.1 Overview of the documentation
Concept and target groups
This Service Supplement completes the information given in the Operating
Manual, the Options Guide and the Technical Manual of the system board.
The activities described in this manual may only be performed by service
personnel.
Service DVD PRIMERGY
Service partners of Fujitsu Siemens can order a Service DVD PRIMERGY. On
the DVD the following manuals are available in pdf format:
– The “Safety notes and other important information” manual
– The Operating Manual for PRIMERGY RX300 S3
– The Technical Manual for the system board D2119
– The Options Guide for PRIMERGY RX300 S3
– The Service Supplement PRIMERGY RX300 S3
– The “BIOS Setup” manual

6 Service Supplement RX300 S3
Overview of the documentation Introduction
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: P:\RX300S3\RX300_S3_SS_bearbMoni\RX300S3_2x6HDD_ss_en\rx300s3-ss-e.k01
Information/procedure Manual
Detailed safety notes Safety notes
Features and technical data of the server Operating Manual
Installation and operation, among other things:
– External ports
– Operation
– Configuration of the server
– Installation of the rack mounting kit
Troubleshooting
Installation/removal of all hot-plug components:
– hot-plug power supply units
– hot-plug hard disk drives
– hot-plug PCI boards
Information about the system board:
– Features of the system board
– Board layout
– Jumper settings
–LEDdisplays
– Replacing the battery
Technical Manual
Table 1: Overview of the documentation PRIMERGY RX300 S3

RX300 S3 Service Supplement 7
Introduction Overview of the documentation
IFor some components only the installation routine is described in the
Options Guide. Removing this components proceed in reverse order.
Extensions and upgrades
– Extending/replacing the main memory
– Installing a second processor / replacing the
processor / replacing the heat sink
– Installing the ROMB upgrade kit
– Installing accessible drives
– Installing a Local View module
– Installing a PCI controller in a low-profile slot
– Installing the PCI controller in the riser card
– Installing the external serial interface
– Installing the external parallel interface
– Converting from low-profile slots to standard
PCI slots
Options Guide
Cabling
Replacement routines:
– Replacing the operating panel
– Replacing the USB module
– Replacing the Power backplane
– Replacing the hot-plug PCI print
– Replacing the SAS backplane
– Replacing the fan box
– Replacing the IDTEMP Combo
– Replacing the system board
– Replacing the HDD card
Service Supplement
Settings and Board layouts
BIOS setup BIOS Setup
Information/procedure Manual
Table 1: Overview of the documentation PRIMERGY RX300 S3

8 Service Supplement RX300 S3
Notational conventions Introduction
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: P:\RX300S3\RX300_S3_SS_bearbMoni\RX300S3_2x6HDD_ss_en\rx300s3-ss-e.k01
1.2 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands, menu items or software programs.
„Quotation marks“ indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.
Table 2: Notational conventions

RX300 S3 Service Supplement 9
2Procedure
VCAUTION!
The actions described in these instructions should only be performed by
service personal.
ÊFirst of all please familiarize yourself with the safety instructions in the
chapter “Safety notes” on page 11.
ÊEnsure that all required manuals (see Service DVD) are available, printing
out the PDF files if necessary. You will definitely need the Operating Manual
for the server, the Options Guide for the server and the Technical Manual for
the system board.
ÊShut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the section “Opening the server” on
page 17.
ÊReplace the faulty component as described in the relevant chapter.
ÊClose the server.1
ÊConnect the cables. 1
ÊConnect the server to the power outlet.1
ÊStart the operating system.1
ÊIf necessary, configure the server as required.1
1This procedures are described in the Operating Manual.

© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: P:\RX300S3\RX300_S3_SS_bearbMoni\RX300S3_2x6HDD_ss_en\rx300s3-ss-e.k02