FURNITUREBOX SORRENTO 4 User manual

SORRENTO
DINING TABLE 4
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips, advice
and assembly video or visit
furniturebox.co.uk/club/sorrento-4
SCAN ME

• Check you have all the components and
tools listed.
• Remove all fttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD

Follow us on Instagram
@furniturebox_uk
STEP 1
Put the pieces on a soft at at
surface e.g. a carpet to avoid
scratching or bumping. Insert
part Ax4 Into the assembly
holes of part 1 (the table top).
STEP 2
Insert the metal rods (part
3) into the table leg (part 2)
as shown. Pay attention to
the direction of the rods so
that the base feet are facing
downwards.

www.furniturebox.co.uk
STEP 3
Add the table frame to the table top
using the xings indicated in the
diagram.
ATTENTION: Do not fully tighten
screws.Keep these screws slightly
loose so the table angle can be
adjusted and xed once assembly Is
complete.
Then use xing K to cover the holes
on the table legs (part 2) as shown.
FULL ASSEMBLY INSTRUCTIONS
STEP 4
Attach the table base (part 4) to
the table legs using xings G,
E, C, F. Use xing J to cover the
holes on the table Base (part 4).
STEP 5
ATTENTION: Tighten all screws/bolts
fully and then with help turn the
table over. Assembly is now complete.

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.