FURNITUREBOX PIVERO User manual

PIVERO
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips, advice
and assembly video or visit
furniturebox.co.uk/club/pivero
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD
IMPORTANT
STEP

Follow us on Instagram
@furniturebox_uk
STEP 1
ATTENTION: Put the pieces on a soft at
surface e.g. a carpet to avoid scratching or
bumping. Make sure that you have all pieces
and components ready to build the table.
Firstly insert threaded rods (A) and wooden
dowel (B) into the assemble holes of the table
top (part 1).
ATTENTION: Be careful not to over-screw
beyond the thread stops.

www.furniturebox.co.uk
STEP 2
Place the table legs (part 2) over the
threaded rods as shown, use Fixing
(C), (D), and Box Spanner (E) to
tighten. Then put the Sticker
(F).
FULL ASSEMBLY INSTRUCTIONS

Follow us on Instagram
@furniturebox_uk
STEP 3
ATTENTION: With help,
turn the table around to
complete assembly

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.